The OSI-R is a reflector type linear optical beam smoke detector designed to
operate as a component of fire alarm systems. The beam operates primarily
on the principle of light obscuration utilising an Infra-Red beam. Optical
beam smoke detectors are particularly appropriate for protecting buildings
with large open spaces such as warehouses, atriums etc.
The OSI-R detector is a combined transmitter/receiver unit that can be
directly connected to a conventional detector circuit.
InfraRed Transmitter and Receiver Imager
The Infra-Red transmitter and receiver Imager generates a beam of light towards a high efficiency reflector.
The reflector returns the beam to the receiver where an analysis of the received signal is made.
The change in the strength of the received signal is used to determine the alarm condition. The receiver imager has a wide FOV
of 12° and tracks automatically the reflector in case of building movement or movement of its support structure. It is virtually
impossible for the receiver to lose the reflector out of its side of view without any structural damage being caused to the building. As
a result of this operation the OSI-R eliminates the number one cause of false alarms and/or faults with traditional beam detectors
Optical Filtering
Optical filtering, high-speed image acquisition and intelligent software algorithms provide the OSID-R system with higher levels
of stability and with greater resistance to high level lighting variability. As such the detector has a better resistance to sunlight and
intruding objects in its FOV.
The detector will not alarm when saturated by sunlight, reflected sunlight or any other very bright light sources. In worst case
the detector will go in to trouble and hence solving another cause of false alarms with traditional basic photocell receiver beam
detectors.
Thanks to the smoke imaging techniques, the detector will not alarm for partial and sudden blockage.
Alignment
The alignment of the detector is extremely intuitive, fast and accurate. Both the IR transmitter and the CMOS imager are contained
in the eyeball that can turn freely in all directions. The eyeball moves +/- 20 ° in the vertical direction and 50° in the horizontal
direction.
Four arrows that indicate the direction to move the eyeball, will guide the user to find the imager’s perfect alignment with the
reflector.
To get started swiftly at long distances, a laser tool can be inserted in the eyeball to allow finding the reflector quickly and then
fine-tuning the eyeball to the optimum alignment.
Once the optimum alignment is finalised, signalled by all green arrows and LED, the eyeball is locked by tightening the lever on
its side. A paintable cover is then placed over the front to hide the alignment arrows, locking mechanism and secures the locking
lever in locked position.
Unique in the market, the sensitivity of the detector is selected and set automatically at the optimum sensitivity based on the size
of the reflector measured in the FOV.
The detector incorporates automatic drift compensation, whereby the detector will adjust its detection thresholds in line with any
long term signal reduction of the beam caused by contamination of the optical surfaces.
An internal heating option is also provided on the Imager to prevent condensation on the optical surface.
Features
- Combined transmitter and receiver unit, range 5-100 m (16-328 ft)
- Conventional model
- Receiver consists of a CMOS imaging CCD
- Wide 12° field of view
- Intuitive beam alignment indicated by directional arrows
- Single IR wavelength
- Highly resistant to building movement; tolerates +/- 1° movement
- Resistant to strong light sources; does not alarm when saturated by sun
- Resistant to large solid intruding objects
- Automatic sensitivity threshold level setting
- 50° horizontal and 20° vertical beam alignment
- Built-in heater
- Electronic simulated smoke test from ground level
- Standby, fault and alarm LED indicators visible from the front and bottom
- Automatic drift compensation
- Paintable cover
- Removable plug-in terminal blocks
- Optional heater kit available for the reflector
Listings / Approvals
Status LEDs
Status information (Fire Alarm, Trouble and Power) is communicated through the Imager via Status LEDs on the front of the
detector. The OSI-R detector comes with dedicated Trouble and Alarm relays and outputs for remote LED signalling. Specific
Trouble (Fault) conditions are identified through coded flashes of the Trouble LED.
Where greater angular adjustment is required, the multi-mount accessory enables the detector to move through 28° vertically and
360° horizontally when ceiling mounted or up to 23° vertically and 90° horizontally when wall mounted.
To assure the correct operation of the system, a test can be initiated at convenience from ground level using the RTS151KEY unit.
By activating the key, the unit will reduce its IR transmitted power till under the automatically set alarm level resulting in an alarm
condition at the detector. The alarm condition will remain for as long as the key is activated.
To comply with local regulation and installation codes it may be required to use a test filter inside the beam path.
Installation Recommandations
Installation should be undertaken in accordance with recognised national or international standards and codes of practice.
Xtralis also recommends that simulated fire tests are conducted to ensure that the desired response time for a given smoke test
is achieved.
AI Automation Services
Newsletter
()