DESCRIPTION
The Select Series low profile smoke detectors are intelligent
addressable plug-in detectors with point ID capability that
enables each detector address to be set with rotary address
switches providing exact device locations.
Detector sensitivity is continually monitored and reported to
the fire alarm control panel. These intelligent sensors utilize
a state-of-the-art thermistor sensing circuit for fast response.
Mircom’s Advanced Protocol uses a high speed
communication protocol that greatly increases the speed of
communication between the intelligent devices.
The modern design and expanded color options support
contemporary aesthetic demands. In addition, each detector
is constructed for exceptional installation and maintenance
efficiency.
The Select Series MIX-2351AP(A) photoelectric detector’s
re-designed optical sensing chamber is engineered to sense
smoke produced by a wide range of combustion sources
in accordance with more stringent code standards. The
sensitivity of Select Series detectors can be programmed
using the control panel software to suit the environment.
The multi sensor transmits an analog representation of the
smoke density and temperature over a communication line
to the compatibly listed Fire Alarm Control Panel, such as the
Mircom Flex-Net. The FACP is able to illuminate LED display
points based on the values received from the sensor. The
LED indications can be displayed for temperatures below
90°F, between 90°F and 135°F, and above 135°F. This
can be used for Fire Service Access Elevator (FSAE) display
(Temperature sensing per NFPA 72 2019 21.5).
Features
- Multi-criteria detection
- Designed to meet UL 268 7th Edition and UL 521 Listed. (MIX-2351AP/TAP/RAP)
- Designed to meet CAN/ULC S529 Rev. 4 and CAN/ULC S530 listed. (MIX-2351APA/TAPA/RAPA)
- New modern profile
- Analog communications
- Low standby current
- Rotary address switches
- Dual LEDs for 360° visibility
- Expanded color kit options
AI Automation Services
Newsletter
()