Calibration Technologies Gg-h2-ec-2000 | Hydrogen | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

CALIBRATION TECHNOLOGIES   GG-H2-EC-2000

SKU# (2965)



CALIBRATION TECHNOLOGIES GG-H2-EC-2000
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
CTI GasGuard H2 Hydrogen Catalytic Bead Sensor 0-1% (10000 ppm or 25%LEL) for gas leak detection in battery charging rooms, steel industry, refineries and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

4-20 mA

GG-H2-EC-2000   
1,142.66

Gas Range
Relay Output
RM420 Relay Output

   In Stock  ]
2 Variants of base SKU
Key Features

  • Hydrogen selective catalytic bead sensor technology for long life
  • Industry standard linear 4/20 mA output
  • Corrosion, weather and chemical resistant polycarbonate sensor enclosure
  • Intelligent-design enclosure temperature control for improved cell life
  • Sensor designed to adapt to any harsh environment from -40°F to +120°F
  • Real-time continuous monitoring for early detection of explosive concentrations.
  • Detectable range: 0-1% (10,000 ppm or 25% LEL)
  • Absolutely no Zero drift compared to other catalytic bead type sensors

The GasGuard H2-1% utilizes hydrogen selective catalytic bead sensor technology for fast and accurate detection. The standard detection range provides real-time continuous monitoring of hydrogen concentrations accurately down to 500 ppm, with no false alarms.

The intelligent internal temperature control of the GasGuard H2-1% provides optimum temperature control for extended cell life. The high-quality injection-molded polycarbonate enclosure offers excellent chemical corrosion protection and high impact resistance.

The GasGuard H2-1% provides an industry standard linear 4/20 mA output signal compatible with most gas detection systems and PLCs. The output signal is not affected by drastic temperature variations or other atmospheric conditions.

Applications

  • Battery Charging Rooms
  • Steel industry
  • Refineries
  • Perimeter Monitoring
  • Heat treatment
  • Sea Vessels
Benefits

  • Simple operation
  • Rugged and reliable
  • Energy savings
  • Long-life sensor

The International Fire Code section 608.6.1 states “the ventilation system shall be designed to limit the maximum concentration of hydrogen to 1% (25%LEL) of the total volume of the room” or “continuous ventilation shall be provided at a rate of not less than 1 cfm per square foot of floor area in the room”.

When using the GasGuard H2-1% in combination with any of our GasGuardian controller line (or any other 4/20 mA input device), exhaust fan activation will prevent dangerous accumulation of explosive hydrogen gas concentrations. Since continuous ventilation in refrigerated areas can add up to huge costs, activating exhaust fans only when necessary can amount to thousands of dollars a year in energy savings for your company.

Every circuit board is sealed forever in potting compound, protecting electronic components and copper tracing from corrosion. A specially vented chemical- resistant polycarbonate enclosure protects the sensor from accidental damage, weather and direct hose-hits from clean-up crews.

Specifications
DETECTION PRINCIPLE: Catalytic Bead
DETECTION METHOD: Diffusion
GASES: Hydrogen (H2)
RANGES: 0/1% (10,000 ppm) (25% LEL)
OUTPUT SIGNAL: Linear 4/20 mA (max input impedance: 700 Ohms)
POWER SUPPLY: +24 VDC, 250 mA
RESPONSE TIME: T50 = less than 30 seconds
T90 = less than 60 seconds
ACCURACY: +/- 5% of value, but dependant on calibration gas accuracy and time since last calibration
ZERO DRIFT: Less than 0.1% of full-scale per month, non- cumulative
LINEARITY: +/- 0.5% of full-scale
REPEATABILITY: +/- 1% of full-scale
WIRING CONNECTIONS: 3 conductor, shielded, stranded, 20 AWG cable (General Cable C2525A or equivalent) up to 1500 ft.
ENCLOSURE: Injection-molded NEMA 4X polycarbonate
Hinged lid with captive screw. For non-classified areas.
TEMPERATURE RANGE: -40°F to +120°F (-40°C to +49°C)
HUMIDITY RANGE: 5% to 100% condensing
DIMENSIONS: 7.5” high x 6.5” wide x 3.75” deep
WEIGHT: 3 lbs
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    10 Items found.
CK-Cup-Hose
(2982)

CALIBRATION TECHNOLOGIES  CK-Cup-Hose

Standard cup, large cup & 3 ft hose



$37.83 
CK-CUPSET
(7107)

CALIBRATION TECHNOLOGIES  CK-CUPSET

Cup Set, Calibration Fits Sensor Diameters 0.625, 0.875, 1, 1.25, 1.75 (inches), tubing entry for 1/8" ID hose.



$62.08 
RM420-LR
(5805)

CALIBRATION TECHNOLOGIES  RM420-LR

Calibration Technologies Adjustable Setpoint Relay, 24Vdc 4-20 mA to relay module, fail-safe relay output to any 4-20 mA device. SPDT relay, Form C contacts.



$223.10 
SHA-024-B
(2987)

CALIBRATION TECHNOLOGIES  SHA-024-B

CTI SHA-24 100dB Horn/Strobe 24 VDC. White body and blue lens. With weather proof mounting backbox. UL1638 approved.

Configure

$237.65 
SHA-120-B
(2988)

CALIBRATION TECHNOLOGIES  SHA-120-B

CTI SHA-120 99dB Horn/Strobe 120 VAC. White body and blue lens. With weather proof mounting backbox. UL Listed. NEMA 4X enclosure.

Configure

$266.75 
SHA-PY-120-B
(7080)

CALIBRATION TECHNOLOGIES  SHA-PY-120-B

CTI SHA-PY-120 Horn and Strobe. Weather-proof. 120 VAC. Two or three wire connection. High intensity 5 Joules Xenon flash and 8 selectable horn tones. Wall or ceiling mount. NEMA 4X. UL listed.

Configure

$384.12 
SL3-_24-R____-B
(6570)

CALIBRATION TECHNOLOGIES  SL3-24-R-B

CTI SL3 LED stack light with 105 dB buzzer. Up to 5 24VDC or 120VAC Flashing light modules (62 fpm). Polycarbonate Housing. 1/2" NPT conduit. IP66. NEMA 4X. UL listed.

Configure

$468.51 
EM2-24
(2971)

CALIBRATION TECHNOLOGIES  EM2-24

CTI EM2 Gas Detection Entrance Monitor Controller/Alarm Panel for stand-alone or feed-through applications. 8A SPDT relay, 3" LCD display, 4-20 mA input and NEMA 4X enclosure. IP68.

Configure

$674.15 
GG-2
(2972)

CALIBRATION TECHNOLOGIES  GG-2

CTI GasGuardian 2 2-Channel Controller/Alarm Panel for simultaneously monitor of two sensor locations. 6 onboard relays, horn relay, alarm log, 4-20 mA input, LCD display and NEMA 4X enclosure designed for washdown and outdoors.



$2,129.15 
GG-6
(2973)

CALIBRATION TECHNOLOGIES  GG-6

CTI GasGuardian 6 6-Channel Controller/Alarm Panel for simultaneously monitor of up to 30 sensors (with expansion modules). 6 onboard relays, horn relay, alarm log, 4-20 mA input, LCD display and NEMA 4X enclosure designed for washdown and outdoors.

Configure

$4,265.09 
> HYDROGEN :    29 Items found.
M001-0019-000
(6329)

MPOWER  M001-0019-000

mPower UNI MP100 Portable Single Gas Detector for detection of Hydrogen (H2) 0-1000ppm or 0-2000ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$299.28 
70-2900-0507-1
(7309)

AIMSAFETY  70-2900-0507-1

AimSafety PM100 Portable Gas Detector (Two Year Disposable) for Hydrogen (H2) 0-1000 ppm. LCD display. Audible, visual and vibrating alarms. IP67. UL & CSA Class I Div 1, Div 2, ATEX, IECEx, INMETRO.



$304.00 
SV-3604
(7375)

PROSENSE  SV-3604

Prosense SafeVader SV-3604 Fixed Gas Detector with Electrochemical sensor for Hydrogen (H2) with range 0-500 ppm to 0-2000 ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$366.92 
P-3634
(6776)

PROSENSE  P-3634

Prosense P-3634 Gas Detector with Electrochemical sensor for Hydrogen (H2) with ranges 0-500ppm to 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$564.86 
PXN-3634-1/2
(7324)

PROSENSE  PXN-3634-1/2

Prosense PXN-3635 Gas Detector with Electrochemical sensor for Hydrogen (H2) with range 0-500ppm to 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$717.29 
BWS1-R-Y
(6387)

BW  BWS1-R-Y

BW Solo Serviceable Single-gas Detector for Hydrogen (H2) 0-1000 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

PQN-3634-1/2
(6948)

PROSENSE  PQN-3634-1/2

Prosense PQN-3634 Gas Detector with Electrochemical sensor for Hydrogen (H2) with ranges 0-500ppm, 0-1000ppm or 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$797.98 
PXD-3634-1/2
(7323)

PROSENSE  PXD-3634-1/2

Prosense PXD-3634 Gas Detector with Electrochemical sensor for Hydrogen (H2) with range 0-500ppm to 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$869.71 
PQD-3634-1/2
(6737)

PROSENSE  PQD-3634-1/2

Prosense PQD-3634 Gas Detector with Electrochemical sensor for Hydrogen (H2) with ranges 0-500ppm, 0-1000ppm or 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$968.34 
SPSTAXG1
(1487)

HONEYWELL  SPSTAXG1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Hydrogen (H2) with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20 mA loop output. ATEX Approved. (Optional ranges: 0-1000 ppm, 0-10000 ppm)

Configure

$1,068.38 
2106B1416
(1462)

HONEYWELL  2106B1416

Honeywell Sieger Sensepoint Gas Detector Transmitter for Hydrogen (H2) (0-1000 ppm to 0-10000 ppm) with Surecell Toxic Sensor. 2 wire 4-20 mA loop output. ATEX/IECEx CSA Class I Div 2 Certified.

Configure

$1,293.77 
100-0008-00-SS-2-2/100-0015-CAT-H2
(4753)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-CAT-H2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Hydrogen (H2) 0-4% vol or 0-100ppm (Catalytic bead or electrochemical). Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Div 1 certification. Optional 2nd sensor available.

Configure

$1,307.65 
GG-H2-EC-10000-EXP
(5978)

CALIBRATION TECHNOLOGIES  GG-H2-EC-10000-EXP

CTI GG-H2-EC-EXP Explosion Proof Electrochemical Gas Sensor for Hydrogen (H2) 0-2000 ppm and 0-10000 ppm. 4-20 mA output, 24VDC power supply. Explosion Proof Copper-free aluminum enclosure for Class l, Div 1 & 2, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved.

Configure

$1,408.44 
SPXCDULNG1
(665)

HONEYWELL  SPXCDULNG1

Honeywell XCD Sensepoint Gas Detector, Hydrogen (H2) Electrochemical Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for hydrogen (H2) 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 1,000ppm only. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,801.19 
961-070026-01PC
(6053)

DETCON  961-070026-01PC

Detcon DM-102-H2 Electrochemical Hydrogen (H2) 0-1%vol Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, Groups A, B, C, & D. Optional Alarm Relays.

961-840026-100C
(6363)

DETCON  961-840026-100C

Detcon DM-102-H2 Electrochemical Hydrogen (H2) 0-100ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, Groups A, B, C, & D. Optional Alarm Relays.

2100AL-0-1018/0500P/L0
(120)

RC SYSTEMS  2100AL-0-1018/0500P/L0

RC Systems SenSmart 2100 2 wire 4-20 mA Loop Powered gas detector for Hydrogen (H2) 0-2000 ppm or 0-100% LEL with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output. 10-30 VDC. Stainless steel or aluminum enclosure. CSA certified for Class I Div 1 & 2 (Explosion Proof).

Configure

$2,038.96 
S3KUL2-XNXXSG1SS
(689)

HONEYWELL  S3KUL2-XNXXSG1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring HYDROGEN (H2) with electrochemical sensor, 2-wire 4-20 mA loop, LCD Display. Optional ranges: 0-1,000ppm ,0-10,000ppm Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$2,072.68 
41001AL-0-1019/0500P/L0
(7163)

RC SYSTEMS  41001AL-0-1019/0500P/L0

RC Systems SenSmart 4100 2-wire 4-20 mA loop powered gas detector for Hydrogen (H2) 0-2000 ppm or 0-100% LEL with GEN 2 smart Electrochemical sensor. Includes LCD Display. 10-30 VDC, Two flashing Alarm LEDs. Aluminum, Stainless Steel or non-metallic enclosure. CSA certified for Class I Div 1 & 2 (Explosion Proof).

Configure

$2,074.02 
51001AL-0-1019/0500P/L0
(7126)

RC SYSTEMS  51001AL-0-1019/0500P/L0

RC Systems SenSmart 5100 3-wire gas detector for Hydrogen (H2) 0-2000 ppm or 0-100% LEL with GEN2 smart Electrochemical sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$2,129.87 
Page: 1 | 2 | All
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.