Key Features
- Simultaneously monitor 6 sensors – up to 30 with expansion modules
- Six onboard relays standard – eight more relays per expansion module
- Alarm Log records and stores every event
- Industry standard linear 4/20 mA input can accommodate any gas sensor
- Simple menu-driven programming through the LCD operator interface
- Power supply can also drive external horn/strobes
- Watertight enclosure designed for washdown areas and outdoors
- Configurable for GasGuard sensor line and any other 4/20 mA gas sensor
- Horn relay silenceable from front-panel Silence key
The GG-6 can interface to, but
operate independently of, plant
control systems for a reliable stand-
alone safety system. The GG-6
comes standard with six onboard
relays, as well as an onboard
buzzer. One relay is a dedicated
fault relay, the other five relays are
user programmable to trigger upon
any event for any sensor or group
of sensors.
The GG-XM expansion modules allow
you to add on eight sensors for each
module, up to three modules for a
total of 30 sensors. Each GG-XM
comes equipped with eight 4/20 mA
inputs, eight programmable relays and
its own power supply. Analog output
boards can be added on to the
controller and expansion modules,
which can be connected to your plant
PLC or other 4/20 mA control panel.
The watertight fiberglass
enclosure will stand up to
corrosive washdown, temperature
swings and any other harsh
environment often encountered in
the food industry. The GG-XM’s
connect to the GG-6 and /or each
other via a 24” wire harness.
Since the alarm log holds 10,000
events, yesterday’s events will not
go unnoticed.
Applications
- Engine Rooms
- Tank Rooms
- Mechanical Rooms
- Sea Vessels
- Refrigeration Systems
- Perimeter Monitoring
- Heat Treatment
- Refineries
- Chemical Plants
Benefits
- Full-featured
- Expandable
- Easy configuration
The GG-6 controller utilizes a user-
friendly LCD operator interface for all
readout information and alarm function
control. Out of the box, the controller
and expansion modules are configured
and ready to go with default setpoints
loaded in the software. Just enter the
zone location names and adjust the low
the high alarm setpoints if needed.
The backlit LCD displays real-time
status of gas sensor concentrations and
allows for custom programming thru a
user-friendly menu system. The GG-6
and expansion modules are compatible
with all gas sensors with industry
standard 4/20 mA inputs. The power
supplies are powerful enough to power
all connected sensors and external
24Vdc horn/strobes.
All wiring is safely enclosed inside and
easily accessed from the hinged lids.
All expansion modules connect to the
GG-6 in a daisy-chain configuration.
Wiring is as easy as plugging in a
wiring harness. All human interfacing is
performed via the waterproof
membrane keys on the outside of the
GG-6, for non-intrusive operation.