Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
LEL CATALYTIC BEAD OR INFRARED:    189 Items found.
(7250)

DET-TRONICS  006300-012

Det-tronics PIR9400 PointWatch Infrared Hydrocarbon Gas Detector for Methane 0-100% LEL. Diffusion based. 18-30 VDC. 4-20 mA output signal. Explosion proof. IP66. Suitable for Class I Div 1, Div 2, Zone 1 and Zone 2 hazardous areas.



 
(3001)

HONEYWELL  00705-A-1733

Honeywell 705 Combustible Sensor. Aluminum. Catalytic Bead (SG16B) 0-100% LEL.



$569.10 
(7260)

DET-TRONICS  012731-504

Det-tronics FlexSight LS2000 Infrared gas detection system for combustible hydrocarbon gases 0-5% LEL. 4-20 mA output, HART and RS-485 Modbus communication. 24 VDC. Stainless steel transmitter and receiver. IP66/IP67. NEMA Type 4X. Suitable for Class I, Div 1 and Div 2; Class II, Div 1; Class I, Zone 1; and Zone 1, Zone 2. FM, IEC and SIL 2 Approvals.



 
(4722)

ESP SAFETY  100-0001-M11-SS-1-2-CH4

ESP Safety SGOES Infrared Gas Detector for measurement of hydrocarbon gases, Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Gasoline, Diesel, JP8, Acetone, Benzene, Butadiene, Butanol 0-100% LEL and others. Factory calibrated at 0%, 20%, 50%, and 95% LEL. Analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 3 relays. Includes protective weather cover and mounting hardware. IP66. SIL2 Rated. FM, ABS, IECEx, CE and CSA, Class I Div 1 Approved. Stainless steel construction. T90 response time= < 5 seconds (methane).

Configure

$1,490.40 
(4719)

ESP SAFETY  100-0003-AL-1-1

ESP Safety IPES-IR/UV Infrared/Ultraviolet Flame Detector for detection of oil and petrochemical product fires. 4.2 to 4.6 microns (infrared) and 180 to 250 nanometers (ultraviolet) ranges. 90 degree field of view. RS-485, Modbus RTU, 4-20 mA and relay outputs. Color status LED. Explosion-proof Housing. Designed for Class I, Div 1, Group B, C & D. ATEX certified, SIL3 Rated. Includes protective visor, stainless steel mounting bracket and hardware.

Configure

$1,413.00 
(4761)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-IR-C3H8

ESP Safety Vector 2-channel gas detector controller with smart Infrared IR Plug-In sensor included to detect Propane (C3H8) 0-100% LEL. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Div 1 certification. Optional 2nd sensor available.

Configure

$1,593.90 
(4756)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-IR-CH4

ESP Safety Vector 2-channel gas detector controller with smart Infrared IR Plug-In sensor included to detect Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Gasoline, Diesel, JP8, Acetone, Benzene, Butadiene, Butanol 0-100% LEL and others. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Div 1 certification. Optional 2nd sensor available.

Configure

$1,593.90 
(4746)

ESP SAFETY  100-0015-IR-CH4

ESP Safety Sensor Assembly, PGU Infrared IR Plug-In sensor for Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Gasoline, Diesel, JP8, Acetone, Benzene, Butadiene, Butanol 0-100% LEL and others. Stainless steel housing, includes weather protective dust cap.

Configure

$604.00 
(4720)

ESP SAFETY  100-0016-AL-1-1

ESP Safety IPES-IR3 Infrared Flame Detector for detection of combustible vapors gases fires. Sends an alarm only when data from 3 different IR wavelengths detects a flame. RS-485, Modbus RTU, 4-20 mA and relay outputs. Tri-Color status LED. Explosion-proof Housing. IP66. Designed for Class I, Div 1, Group B, C & D. ATEX certified, SIL3 Rated. Includes protective visor, stainless steel mounting bracket and hardware.

Configure

$1,888.20 
(4115)

HONEYWELL  10-0191

Honeywell I2C Catalytic Bead LEL Sensor / mA Input Board for Honeywell HA71



$1,551.96 
(7183)

RC SYSTEMS  10-0498/100L

RC Systems SenSmart 1300M Infrared IR gas detector transmitter for Hydrocarbons 0-100% LEL or %Vol with high performance harsh environment infrared Millenium sensor-transmitter, 4-20 mA output, 10-30 VDC, Stainless Steel casing. CSA certified for Class I Div 1 (Explosion Proof). Available gases: Acetylene, Ethane, Ethanol, Ethylene Oxide, Diesel, Gasoline, Hexane, Jet Fuel, JP4, JP5, JP8, Methane, Methanol, n-Butane, Pentane, Propane, Propylene and Toluene.

Configure

$3,176.62 
(7090)

RC SYSTEMS  10-9050

RC Systems 10-9050/10-9082/10-9550 Gen I Infrared Smart Sensor assembly for Series 1000, 2000, 3000, 5000, 6000 Gas Detectors with ST-44 & ST-48 transmitter, Methane (CH4) 0-100% LEL or 0-100% Volume

Configure

$744.54 
(7103)

RC SYSTEMS  10-9053

RC Systems 10-9032/10-9053/10-9553 Gen I Infrared Smart Sensor assembly for Series 1000, 3000, 5000, 6000 Gas Detectors with ST-44 & ST-48 transmitter, Carbon Dioxide (CO2) IR 0-1.5% or 0-5% Volume

Configure

$744.54 
(7091)

RC SYSTEMS  10-9071

RC Systems 10-9070/10-9071/10-9570/10-9571 Gen I Catalytic Bead Smart Sensor assembly for Series 1000, 2000, 3000, 5000, 6000 Gas Detectors with ST-44 & ST-48 transmitter, Methane/Hydrocarbons 0-100% LEL

Configure

$512.91 
(7230)

AUTRONICA  116-014048-232

Autronica AutroPoint HC200 Infrared IR Hydrocarbon Gas Detector calibrated to methane, propane, ethylene, or butane 0 to 100% LEL. Explosion-proof stainless steel housing. 4-20 mA signal with HART communication. MODBUS and ASCII supported. SIL2, FM/CSA, DEMKO, IECEx and ATEX certified for use in Class I, Div 1 and Div 2, and Zone 1 and Zone 2.



 
(7231)

AUTRONICA  116-5861-011.4310

Autronica AutroFlame X33AF Multispectrum Triple Infrared (IR3) Flame Detector for multiple hydrocarbon fuels. Explosion/flame proof. Includes fire alarm, fault and auxiliary relays, isolated 0-20 mA output model with optional HART communication. 24 VDC. SIL2, FM and ATEX certified for use in Class I, Divi 1 and Div 2.

Configure

 
(6903)

RC SYSTEMS  1200ALD-109071/100P-L0

RC Systems SenSmart 1200 gas detector for Hydrocarbons and Hydrogen, Catalytic Bead sensor (acetylene, ammonia, butane, ethane, ethanol, hexane, hydrogen, isopropyl alcohol, methane, pentane, propane, propene or propylene) 0-100% LEL with 'ST-48' smart transmitter. 3-Wire Bridge Output. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,242.86 
(3275)

HONEYWELL  1226-9001

Honeywell XNX Transmitter POD (Personality, Options and Display module), Infrared IR Personality

Configure

$912.38 
(884)

HONEYWELL  1226A0359

Replacement Catalytic bead sensor cartridge combustible 0-100% LEL (Lower Explosive Limit) for Honeywell XNX.



$587.35 
(6904)

RC SYSTEMS  1300ALD-109050/100P-L0

RC Systems SenSmart 1300 Infrared (IR) Gas Detector for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide 0-100% LEL or %Vol with 'ST-48' smart transmitter. Infrared (IR) sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,467.53 
(6905)

RC SYSTEMS  1300ALD-109051/100P-L0

RC Systems SenSmart 1200 gas detector for Propane (C3H8) 0-100% LEL or vol with 'ST-48' smart transmitter. Infrared (IR) sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,467.53 
(2958)

HONEYWELL  2104B2071

Honeywell Sieger Searchline Excel Infrared (IR) Open Path Gas Detector Spare Transmitter for Hydrocarbons (Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol and Methanol) 0-5 LEL/meter. Up to 650' operating ranges. Stainless Steel housing and Xenon flash tube. Available Approvals: ATEX, EExd, UL, CSA and FM. IP66 and IP67.

Configure

$8,139.47 
(5002)

HONEYWELL  2104B2111

Honeywell Sieger Searchline Excel Infrared (IR) Open Path Gas Detector Spare Receiver Standard Version Short Range ATEX for Hydrocarbons (Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol and Methanol) 0-5 LEL/meter. Up to 650' operating ranges. 316 Stainless Steel housing and Xenon flash tube. Available Approvals: ATEX, EExd, UL, CSA and FM. IP66 and IP67.

Configure

$13,633.49 
(4303)

HONEYWELL  2104B3021

Honeywell Sieger Searchline Excel Infrared (IR) Open Path Gas Detector Spare Transmitter for Hydrocarbons (Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol and Methanol) 0-5 LEL/meter. LONG RANGE TRANSMITTER. Up to 650' operating ranges. 316 Stainless Steel housing and Xenon flash tube. Available Approvals: ATEX, UL and CSA. IP66 and IP67.

Configure

$11,284.87 
(2959)

HONEYWELL  2104B3121

Honeywell Sieger Searchline Excel Infrared (IR) Open Path Gas Detector Spare Receiver for Hydrocarbons (Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol and Methanol) 0-5 LEL/meter. LONG RANGE RECEIVER. Up to 650' operating ranges. 316 Stainless Steel housing and Xenon flash tube. Available Approvals: ATEX, UL and CSA. IP66 and IP67. Sink or Source versions.

Configure

$22,558.45 
(3414)

HONEYWELL  2108N4000N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector LEL available for over 100 gas and vapour calibrations. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration (Methane, Natural Gas, Propane, etc.) combustible 0-100% LEL (Lower Explosive Limit) with dust barrier, weather housing, deluge/heat shade, configured as current source output, ATEX/IECEx approved (Also available UL/INMETRO and CSA). Optional remote gassing cell.

Configure

$2,417.63 
(1676)

HONEYWELL  2108N4100N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector LEL available for over 100 gas and vapour calibrations. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration (Methane, Natural Gas, Propane, etc.) combustible 0-100% LEL (Lower Explosive Limit) with dust barrier, weather housing, deluge/heat shade, configured as current source output, UL/INMETRO approved (Also available ATEX and CSA). Optional remote gassing cell.

Configure

$2,417.63 
(1967)

HONEYWELL  2108N4101N

Honeywell Ethylene Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector for LEL, 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Ethylene calibration with dust barrier, weather housing, deluge/heat shade, configured as current source output. Optional remote gassing cell.

Configure

$2,556.43 
(1965)

HONEYWELL  2108N5100N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector LEL available for over 100 gas and vapour calibrations. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration (Methane (Natural Gas), Propane, etc.) combustible 0-100% LEL (Lower Explosive Limit), for use in remote sampling systems, includes flow housing and remote gassing cell, configured as current source output.

Configure

$2,826.40 
(1968)

HONEYWELL  2108N5101N

Honeywell Ethylene Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector for LEL. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Ethylene calibration, for use in remote sampling systems, includes flow housing and remote gassing cell, configured as current source output

Configure

$3,366.32 
(1966)

HONEYWELL  2108N5110N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector for gas ranges 0–100 %v/v Methane (CH4), 0–600,000 ppm Propane (C3H8) and 0–400,000 ppm Propane (C3H8). 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration fitted with remote gassing cell and flow housing.

Configure

$4,065.81 
(3726)

NOTIFIER  30-3003

Notifier 30-3003 Explosion-Proof Smoke Detector for Slow smoldering and fast burning fires. Uses a solid-state infrared-emitting diode (IRED). For use in hazardous industrial and commercial locations. Form A (SPST) N.O. contacts. 2.3% fixed sensivity. NEC and CSA certified for use in Class I, Div 2. (Obsolete product replaced by Pyrotector 30-3013) *** Phased Out ***



 
(6892)

RC SYSTEMS  32001AL-0-9033/100P/L0

RC Systems SenSmart 3200 3 wire gas detector for Acetylene (C2H2) 0-100% LEL with 'ST-48' smart transmitter with Catalytic Bead sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

 
(6893)

RC SYSTEMS  32001AL-0-9070/100P/L0

RC Systems SenSmart 3200 3 wire gas detector with Catalytic Bead sensor for Natural Gas/Methane (CH4) 0-100% LEL with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,992.21 
(6894)

RC SYSTEMS  32001AL-0-9071/100P/L0

RC Systems SenSmart 3200 3 wire gas detector with Catalytic Bead sensor for Hydrocarbons and Hydrogen (ammonia, butane, ethane, ethanol, hexane, hydrogen, Isopropyl alcohol, pentane, propane, propene, propylene) 0-100% LEL with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,992.21 
(6898)

RC SYSTEMS  33001AL-0-9050/100P/L0

RC Systems SenSmart 3300 3 wire gas detector with infrared (IR) sensor for Hydrocarbons 0-100% LEL or %Vol for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$2,216.88 
(6899)

RC SYSTEMS  33001AL-0-9051/100P/L0

RC Systems SenSmart 3300 3 wire gas detector for Propane (C3H8) 0-100% LEL with 'ST-48' smart transmitter with infrared (IR) sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$2,216.88 
(7039)

RC SYSTEMS  3300MAL-0-0498/100L/L0

RC Systems SenSmart 3300M 3 wire gas detector for Hydrocarbons 0-100% LEL or %Vol with 'ST-48' smart transmitter with high performance harsh environment infrared smart Millenium sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof). Available gases: Acetylene, Ethane, Ethanol, Ethylene Oxide, Diesel, Hexane, Jet Fuel, JP4, JP5, JP8, Methane, Methanol, n-Butane, Pentane, Propane, Propylene and Toluene.

Configure

$4,670.13 
(6897)

RC SYSTEMS  34001AL-0-9053/005P/L0

RC Systems SenSmart 3400 3 wire gas detector for Carbon Dioxide (CO2) 0-1.5% or 0-5% with 'ST-48' smart transmitter with infrared (IR) sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$2,216.88 
(7040)

RC SYSTEMS  3400MAL-0-0500/3V/L0

RC Systems SenSmart 3400M 3 wire gas detector for Carbon Dioxide (CO2) 0-3 %Vol or 0-5 %Vol with 'ST-48' smart transmitter with high performance harsh environment infrared smart Millenium sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$4,670.13 
(6147)

DELPHIAN  364-450-01

Delphian GazTell Fixed Point Infrared Gas Detector for Methane (CH4) (4-112% LEL or 4-100% vol). 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. FM and SIL2 Approvals. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
(6148)

DELPHIAN  364-510-01

Delphian GazTell Fixed Point Infrared Gas Detector for Carbon Dioxide (CO2) 0.02% to 4.5% vol. 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
(6143)

DELPHIAN  364-850-01

Delphian Determinator Infrared Combustible Hydrocarbon (CHC) MultiGas Detector for up to 5 gases (5-999% LEL). Explosion proof. Includes 4-20 ma Output and 5 Digit LED Display (optional alarm relays). FMRC and CSA approvals for Class I Div 1 Groups A,B,C,D. Available gases: Acetone, Benzene, Butadiene, Butane, Butanol, Cyclohexane, Ethane, Ethanol, Ethylene, Ethylene Oxide, Gasoline, Heptane, Hexane, Iso Pentane, Isopropanol, Methane, Methanol, Pentane, Propane, Propyl Alcohol, Propylene, Styrene, Toluene and Xylene.

Configure

$1,758.72 
(6144)

DELPHIAN  364-850-01

Delphian Determinator Infrared Combustible Hydrocarbon (CHC) MultiGas Detector for up to 5 gases (5-999% LEL). Explosion proof. Includes 4-20 ma Output and 5 Digit LED Display (optional alarm relays). FMRC and CSA approvals for Class I Div 1 Groups A,B,C,D. Available gases: Butene, Di Isopropyl Ether, Ethylamine, Ethyl Acetate, Ethyl Benzene, Isobutyl Isobutyrate, Methyl Iso Butyl Ketone, Methyl Ethyl Ketone, PGMEA, Propyl Acetate, Propylene Oxide and Tetrahydrofuran.

Configure

$1,758.72 
(6145)

DELPHIAN  364-855-01

Delphian Remediator Infrared Gas Detector for Methane (0-100% vol). Explosion proof. Includes 4-20 ma Output and 5 Digit LED Display (optional alarm relays). FMRC and CSA approvals for Class I Div 1 Groups A,B,C,D.

Configure

$1,812.48 
(6140)

DETCON  370-3658CH-700

Detcon Combustible Gas plug-in infrared sensor for IR-700-CH



 
(6887)

RC SYSTEMS  39001AL-0-9022/0010P/9071/100L/L0

RC Systems SenSmart 3000 3 wire gas detector with 'ST-48' smart transmitter for Hydrogen Sulfide (H2S) 0-10 ppm to 0-2000 ppm and additional gas with catalytic bead or infrared sensor (Acetylene, Methane, HC or Propane). Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1(Explosion Proof).

Configure

$2,819.48 
(6857)

SPECTREX  40/40C-I-6-41-AC-N-7

SPECTREX SharpEye 40/40C-I Multispectrum Quad-Sense Flame Detector with Triple Infrared IR3 technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$4,355.57 
(6860)

SPECTREX  40/40C-L4B-6-41-AC-N-7

SPECTREX SharpEye 40/40C-L4B Ultraviolet/Infrared UV/IR 4.5um Flame Detector. Detects hydrocarbon-based fuel and gas fires with proven immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,624.43 
(6859)

SPECTREX  40/40C-LB-6-41-AC-N-7

SPECTREX SharpEye 40/40C-LB Ultraviolet/Infrared Flame UV/IR Detector. Detects flames with a large variety of hazardous sources (hydrocarbon, hydroxyl, hydrogen, metal, inorganic). 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,624.43 
(6883)

SPECTREX  40/40D-I-6-31-AC-N-7

SPECTREX SharpEye 40/40D-I Ultra Fast Multispectrum Quad-Sense Flame Detector with IR3 Triple Infrared technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$4,791.28 
(6886)

SPECTREX  40/40D-L4B-6-31-AC-N-7

SPECTREX SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared Flame Detector UV/IR (4.5um with BIT). Detects flames with a large variety of hazardous sources (hydrocarbon, hydroxyl, hydrogen, metal, inorganic). 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,987.13 
(6885)

SPECTREX  40/40D-LB-6-31-AC-N-7

SPECTREX SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared Flame Detector. UV/IR Detects flames with a large variety of hazardous sources (hydrocarbon, hydroxyl, hydrogen, metal, inorganic). 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,987.13 
(6884)

SPECTREX  40/40D-M-6-31-AC-N-7

SPECTREX SharpEye 40/40D-M Ultra Fast Multi IR Quad-Sense Flame Detector with Multi-Infrared technology. Detects Hydrogen and hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$5,546.20 
(901)

SPECTREX  40/40L-111AC

SPECTREX SharpEye 40/40L Flame Detector with UV (ultraviolet) and IR(infrared) (2.5-3.0 um) sensor for hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, metal and inorganic fires. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Built-in-test (BIT) optional. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-LB ***



 
(4512)

SIMTRONICS  499-810874

Simtronics Sample Flow Housing for GD10P Infrared Gas Detector, airtight chamber for sampling systems. Also used for calibration test.



 
(3725)

SIMTRONICS  499-811938

Simtronics Duct Flange Tube Kit for GD10P Infrared Gas Detector



 
(3701)

SIMTRONICS  499-815712

Simtronics Sun Shade for GD10P Infrared Gas Detector



 
(7121)

RC SYSTEMS  52001AL-0-9071/100P/L0

RC Systems SenSmart 5200 3-wire gas detector with Catalytic Bead sensor for Hydrocarbons and Hydrogen (ammonia, butane, ethane, ethanol, hexane, hydrogen, Isopropyl alcohol, pentane, propane, propene, propylene) 0-100% LEL with GEN2 smart sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$1,619.48 
(7282)

RC SYSTEMS  53001AL-0-0498/100P/L0

RC Systems SenSmart 5300 3-wire gas detector with infrared (IR) smart Millenium sensor for Hydrocarbons 0-100% LEL or %Vol for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide with GEN2 smart sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$4,297.40 
(7136)

RC SYSTEMS  53001AL-0-9050/100P/L0

RC Systems SenSmart 5300 3-wire gas detector with infrared (IR) sensor for Hydrocarbons 0-100% LEL or %Vol for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide with GEN2 smart sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$1,844.15 
(7283)

RC SYSTEMS  54001AL-0-0500/005P/L0

RC Systems SenSmart 5400 3-wire gas detector for Carbon Dioxide (CO2) 0-5% with smart infrared (IR) Millenium sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$4,297.40 
(7019)

RC SYSTEMS  6200AL1-0-109071/100P

RC Systems SenSmart 6200 3 wire Dual Channel Gas Detector for Hydrocarbons and Hydrogen Catalytic Bead sensor (acetylene, ammonia, butane, ethane, ethanol, hexane, hydrogen, isopropyl alcohol, methane, pentane, propane, propene or propylene) 0-100% LEL with 'ST-44' smart transmitter and GEN2 smart sensor. Includes Color TFT Display, 4-20 mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class I Div 1 (Explosion-Proof). IP66.

Configure

$2,414.28 
(7022)

RC SYSTEMS  6300AL1-0-9050/100P

RC Systems SenSmart 6300 3 wire Dual Channel Gas Detector for Natural Gas/Methane (CH4) 0-100% LEL or %Vol with 'ST-44' smart transmitter and GEN2 smart sensor. Infrared (IR) sensor. Includes Color TFT Display, 4-20 mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class I Div 1 (Explosion-Proof). IP66.

Configure

$2,638.96 
(7023)

RC SYSTEMS  6300AL1-0-9051/100P

RC Systems SenSmart 6300 3 wire Dual Channel Gas Detector with Infrared (IR) Sensor for Propane (C3H8) 0-100% LEL with 'ST-44' smart transmitter and GEN2 smart sensor. Includes Color TFT Display, 4-20 mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class I Div 1 (Explosion-Proof). IP66.

Configure

$2,638.96 
(7041)

RC SYSTEMS  6300MAL-0-0498/100L/L0

RC Systems SenSmart 6300M 3 wire Dual Channel Gas Detector for Hydrocarbons 0-100% LEL or %Vol with 'ST-44' smart transmitter with high performance harsh environment infrared smart Millenium sensor. Includes Color TFT Display, 4-20 mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class I Div 1 (Explosion-Proof). IP66. Available gases: Acetylene, Ethane, Ethanol, Ethylene Oxide, Diesel, Hexane, Jet Fuel, JP4, JP5, JP8, Methane, Methanol, n-Butane, Pentane, Propane, Propylene and Toluene.

Configure

$5,092.20 
(7042)

RC SYSTEMS  6400MAL-0-0500/3V/L0

RC Systems SenSmart 6400M 3 wire Dual Channel Gas Detector for Carbon Dioxide (CO2) 0-3 %Vol or 0-5 %Vol with 'ST-44' smart transmitter with high performance harsh environment infrared smart Millenium sensor. Includes Color TFT Display, 4-20 mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class I Div 1 (Explosion-Proof). IP66.

Configure

$5,092.20 
(7424)

RC SYSTEMS  73001AL1900-0-1028/0100P/L0-0000

RC Systems SenSmart 7300 Wireless gas detector for Methane (CH4) 0-100% LEL with GEN 2 smart Infrared (IR) sensor, 900Mhz or 2.4Ghz. Includes LCD Display, Five flashing Alarm LEDs and D-cell lithium battery. Optional 10-30 VDC power board. Aluminum, Stainless Steel or non-metallic enclosure. CSA Certified for Class I, Division 1 (Explosion Proof) or Division 2 (Non-Incendive). Sensor head with splash guard

Configure

$3,525.97 
(7423)

RC SYSTEMS  73001AL1900-0-1029/0100P/L0-0000

RC Systems SenSmart 7300 Wireless gas detector for Propane (C3H8) 0-100% LEL with GEN 2 smart Infrared (IR) sensor, 900Mhz or 2.4Ghz. Includes LCD Display, Five flashing Alarm LEDs and D-cell lithium battery. Optional 10-30 VDC power board. Aluminum, Stainless Steel or non-metallic enclosure. CSA Certified for Class I, Division 1 (Explosion Proof) or Division 2 (Non-Incendive). Sensor head with splash guard

Configure

$3,525.97 
(5006)

DETCON  965-525420-100

Detcon MicroSafe FP-524D Smart gas detection Sensor designed to detect and monitor combustible gases with range 0-100% LEL using matched-pair catalytic bead sensor technology. Aluminum Junction Box. 4-20 mA output. LED Display. Explosion Proof. IP66. CSA and ISA Approved for Class I, Div 1, Groups B, C, & D. Optional HART.

Configure

 
(6100)

DETCON  966-524520-100

Detcon FP-624D Combustible 0-100% LEL Smart Sensor with catalytic bead. Includes detector in stainless steel housing, base connector board, explosion proof enclosure, splashguard, 4-20 mA output, RS-485 serial communication and 3 alarm relays. IP66. CSA approval for Class I, Div 1, Groups C & D. Optional HART.

Configure

 
(2133)

DETCON  967-215520-100A

Detcon IR-700-CH Infrared Smart Combustible Sensor Assembly. Designed to detect hydrocarbon gases 0-100% LEL. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water-Proof, Corrosion-Proof and Vibration-Proof. Optional aluminum or stainless steel junction box. Gases: Methane, Ethane, Propane, Butane, Pentane, Hexane, Ethylene, Gasoline Vapor, Diesel Fuel Vapor, Jet Fuel Vapor Optional Alarm Relays, HART.

Configure

 
(6067)

DETCON  967-405520-005A

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 0-5%. Includes LED display, 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

Configure

 
(6068)

DETCON  967-425520-100A

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 10-100%. Includes LED display, 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

Configure

 
(5005)

DETCON  967-521520-100A

Detcon FP-700 non-intrusive Smart Sensor designed to detect and monitor combustible gases with range 0-100% LEL using catalytic bead sensor technology. Aluminum or Stainless Steel Junction Box. 4-20 mA and Modbus RS-485 outputs. LED Display. Explosion Proof. IP66. CSA, ATEX, CE and SIL2 Approved. Optional Alarm Relays, HART.

Configure

 
(6404)

SIMTRONICS  DF-TV7-XTA0-0XH-00

Simtronics DF-TV7-T Triple Infrared (IR3) Flame Detector for Hydrocarbon fires. Relay, 4-20 mA, 0-22mA and Hart outputs. Configuration with Wireless handheld (TLU600) or via HART. IP66. Certified by SIL3, ATEX, IECEx and CE DPC.

Configure

 
(6056)

SIMTRONICS  DG-TX7-17DG-XXH-X0

Simtronics MultiXplo DG-TX7 Intelligent Flammable Catalytic Bead Gas Detector for Combustibles: Methane (CH4), Propane (C3H8) or Butane (C4H10) 0-100% LEL. Stainless Steel housing with integral display. Configurable output. IP66. ATEX and IECEx approvals. *** Phased Out ***



 
(5384)

BW  DX-BWC4

BW IntelliDoX automated instrument management system for the BW Clip4 BWC4 . Provides bump testing, calibration, configuration, and record-keeping support. Infrared communication. Ethernet and USB port. Includes 2GB internal data storage.

Configure

 
(5160)

BW  DX-CLIP

BW IntelliDoX automated instrument management system for BW Clip BWC2, BWC3 and Solo. 12V. Provides bump testing, calibration, configuration, and record-keeping support. Infrared communication. Ethernet and USB port. Includes 2GB internal data storage.

Configure

 
(5161)

BW  DX-MCLP

BW IntelliDoX automated instrument management system for GasAlertMicroClip XL and X3. 12V. Provides bump testing, calibration, configuration, and record-keeping support. Infrared communication. Ethernet and USB port. Includes 2GB internal data storage.

Configure

 
(6396)

BW  DX-SOLO

BW IntelliDoX automated instrument management system for BW Solo. 12V. Provides bump testing, calibration, configuration, and record-keeping support. Infrared communication. Ethernet and USB port. Includes 2GB internal data storage.

Configure

 
(6338)

BW  DX-ULTRA

BW IntelliDoX automated instrument management system for BW ULTRA. Provides bump testing, calibration, configuration, and record-keeping support. Infrared communication. Ethernet and USB port. Includes 2GB internal data storage.

Configure

 
(4469)

FELIX  F-750

Felix F-750 Portable Produce Quality Spectrometer for analysis of internal and external traits. Measures dry matter, brix, assess fruit maturity and skin color. Near Infrared Analysis (NIR). Battery Powered. Reports quantitative estimates of many substances like Chlorophyll. Includes GPS, LCD transflective display, rechargeable batteries, Data transfer via WiFi/USB/SD card, Xenon Tungsten Lamp.

Configure

$9,357.50 
(6207)

FELIX  F-751AVO

Felix F-751 Portable Avocado Quality Meter with Near Infrared Analysis (NIR). Measures dry matter in avocado and ripeness. Non-destructively. Includes GPS, LCD transflective display, data transfer via WiFi/USB/SD card, rechargeable batteries.



$4,835.50 
(7400)

FELIX  F-751GRAPE

Felix F-751 Portable Grape Quality Meter with Near Infrared Analysis (NIR). Measures Brix, pH, and titratable acidity. Non-destructively. Includes GPS, LCD transflective display, data transfer via WiFi/USB/SD card, rechargeable batteries.



$4,835.50 
(6615)

FELIX  F-751KIWI

Felix F-751 Portable Kiwi Quality Meter with Near Infrared Analysis (NIR). Measures dry matter and Brix. Non-destructively. Includes GPS, LCD transflective display, data transfer via WiFi/USB/SD card, rechargeable batteries.



$4,835.50 
(6614)

FELIX  F-751MANGO

Felix F-751 Mango Quality Meter with Near Infrared Analysis (NIR). Measures dry dry matter and Brix. Non-destructively. Includes GPS, LCD transflective display, data transfer via WiFi/USB/SD card, rechargeable batteries.



$4,835.50 
(4701)

FELIX  F-920

Felix F-920 Check It! Produce Handheld Gas Analyzer for Carbon Dioxide (CO2) and Oxygen (02) 0-100% with Infrared and Electrochemical Sensors. Perfect for MAP (Modified Atmosphere Packaging) applications. Includes data logger, USB and Bluetooth communication, GPS and rechargeable lithium-ion battery.



$2,968.75 
(5003)

FELIX  F-940

Felix F-940 Store It! Gas Analyzer for Ethylene (C2H4) 0-10ppm, Carbon Dioxide (CO2) 0-100% and Oxygen (O2) 0-100% with Infrared and Electrochemical Sensors. Handheld and lightweight. Includes PolarCept! TM water filter, rechargeable lithium-ion battery and Data transfer via WiFi and SD card.



$4,982.75 
(4470)

FELIX  F-950

Felix F-950 Handheld Three Gas Produce Analyzer for Ethylene (C2H4) 0-200ppmv, Carbon Dioxide (CO2) 0-20% and Oxygen (O2) 0-100% to maintain optimum produce quality at every phase. Electrochemical and Infrared sensor. Fast sampling. Compact and handheld design. Data transfer via WiFi and SD card, rechargeable batteries and LCD display. Automated data saving.



$4,982.75 
(5004)

FELIX  F-960

Felix F-960 Ripen It! Gas Analyzer for Ethylene (C2H4) 0-500ppm, Carbon Dioxide (CO2) 0-100% and Oxygen (O2) 0-100% with Infrared and Electrochemical Sensors. Fast, accurate ripening analysis. Handheld and lightweight. Includes PolarCept! TM water filter and rechargeable lithium-ion battery. Data transfer via WiFi and SD card.



$4,982.75 
(3502)

NOTIFIER  FCO-951

Notifier IntelliQuad PLUS FCO-951 Advanced Multi-Criteria Fire/CO Detector with four unique sensing elements: Carbon Monoxide (CO) electrochemical sensor, Infrared (IR) sensing measure, Photo-electric smoke detection and Thermal detection. UL listed. *** replaces FSC-851 ***



 
(6825)

NOTIFIER  FPTI-951

NOTIFIER by Honeywell FPTI-951 Multi-Criteria Photo/Thermal/Infrared Detector with FlashScan and CLIP protocol systems. Dual LEDs for 360° visibility. Optional relay, isolator and sounder bases. UL/ULC Listing. FM, and CSFM Approved. *** Replaces FAPT-851 ***

Configure

 
(5975)

HONEYWELL  FS10-R30

Honeywell Fire Sentry FS10-R Unitized Multi-Spectral Fire Detector for Automatic Electrostatic Paint Spray Booths. Multi-spectral infrared electro-optical (WideBand IR, NearBand IR and Visible light sensors). Includes RS-485 interface and 3 relays. Explosion Proof. 24VDC power input. NFPA 33 Standard. FM and CE Approved.

Configure

$3,251.54 
(7141)

HONEYWELL  FS24XP-ANGXX

Honeywell FS24X Plus Triple Infrared (IR3) Flame Detector for detection of hydrocarbon and hydrogen fires. Includes high visibility status LED, SM4 mount and multiple outputs: 4-20 mA, relays, HART and Modbus. 24 VDC. ATEX, IECEx, cFMus (Class I, Div 1, Groups A,B,C,D), INMETRO, SIL2, FM3260 and EN54-10 Approvals. IP66 / IP67 (NEMA 4X).

Configure

$5,763.95 
(4715)

SIMTRONICS  GD10-L0P-17GC-0XE-B1

Simrad GD10L Open Path Infrared Hydrocarbon Gas Detector for detection of Methane (LEL) gas hazards in a wide range of industrial environments. Vibration and shock resistant. Includes transmiter and receiver. Stainless steel housing. IP66/IP67. ATEX and IECEx Approved. ***Phased out use Spectrex 900 Series Open Path***



 
(3344)

GDS  GDS-58BX-0-110-06-00-00/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Methane (Natural Gas) with range combustible 0-100% LEL (Lower Explosive Limit). Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1. Wide selection of hydrocarbons, alcohol, fuel and combustibles: Propane, Isobutane, Pentane, Butane, Ethanol, Methanol, Propylene, Ethylene, Exane, Jet-A, Diesel, Gasoline, Isopropyl Alcohol and others.

Configure

$7,315.00 
(3348)

GDS  GDS-58BX-0-110-06-15-04/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Methane (Natural Gas) with range combustible 0-100% LEL (Lower Explosive Limit) and Hydrogen Sulfide (H2S). Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1. Wide selection of hydrocarbons, alcohol, fuel and combustibles: Propane, Isobutane, Pentane, Butane, Ethanol, Methanol, Propylene, Ethylene, Exane, Jet-A, Diesel, Gasoline, Isopropyl Alchohol and others.

Configure

$7,675.00 
(3345)

GDS  GDS-58BX-0-127-06-00-00/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Ethylene Oxide (ETO) with range combustible 0-50% LEL (Lower Explosive Limit). Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1.

Configure

$7,315.00 
(3346)

GDS  GDS-58BX-0-132-02-00-00/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Carbon Dioxide (CO2) with range 0-2% v/v to 0-100% v/v. Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1.

Configure

$7,315.00 
(3349)

GDS  GDS-58BX-0-132-02-10-04/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Carbon Dioxide (CO2) with range 0-5% v/v or 0-3.5% v/v and Oxygen (02) with range 0-25%. Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1.

Configure

$7,620.00 
(3343)

GDS  GDS-58BX-0-70-06-00-00/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Catalytic Bead sensor for Combustibles LEL (specify gas) with range 0-100% LEL (Lower Explosive Limit). Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1. Available calibrated to Methane (Natural Gas), Ethane, Ethylene, Hydrogen, Butane, Pentane, IPA, Methanol, Ethanol, MEK, Propane, Propylene, Pentane and many others.

Configure

$5,185.00 
(3347)

GDS  GDS-58BX-0-70-06-15-04/0-0

GDS GDS-58BX Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Catalytic Bead sensor for Combustibles LEL (specify gas) with range 0-100% LEL (Lower Explosive Limit) and Hydrogen Sulfide (H2S). Brushless DC sample pump. Flow status indicator. 24VDC. Includes QVGA TFT Display, two 4-20 mA outputs. Optional relays with MODBUS RTU outputs. Class I Div 1. Available calibrated to Methane (Natural Gas), Ethane, Ethylene, Hydrogen, Butane, Pentane, IPA, Methanol, MEK, Propane, Propylene, Pentane and many others.

Configure

$6,595.00 
(436)

GDS  GDS-IR-1-110-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Combustibles LEL (Specify), 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL2 Rated. Suitable for applications in the harshest of environments. Available gases: Methane (CH4), Propane (C3H8), Isobutane (C4H10), Pentane (C5H12), Cyclopentane (C5H10), n-Butane (C4H10), Ethanol (C2H6O), Methanol (CH4O), Hexane (C6H14), Jet-A, Diesel and Gasoline.

Configure

$2,725.00 
(1742)

GDS  GDS-IR-1-118-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Industrial Process Hydrocarbons (Specify), 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL2 Rated. Suitable for applications in the harshest of environments. Available gases: Propylene (C3H6), Acetylene (C2H2), Methane (CH4), Ethylene (C2H4), Isopropyl Alcohol (C3H8O), Acetone (C3H6O), p-Xylene (C8H10), MEK (C4H8O) adn Styrene (C8H8).

Configure

$2,725.00 
(4464)

GDS  GDS-IR-1-121-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Jet-A 0-100% LEL (Jet Fuel), 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL2 Rated. Suitable for applications in the harshest of environments.

Configure

$2,725.00 
(1741)

GDS  GDS-IR-1-127-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Ethylene Oxide (ETO) with range 0-50% LEL (0-1.5% Vol), 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL2 Rated.

Configure

$2,725.00 
(437)

GDS  GDS-IR-1-132-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Carbon Dioxide (CO2) with range 0-3.5%, 0-5% v/v, 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL2 Rated.

Configure

$2,725.00 
(5829)

GDS  GDS-IR2-1-301-0

GDS GDS-IR2 Infrared Stainless Steel Sensor Head for detection of Ammonia (NH3) in Harsh Environments, 0-1000 ppm to 0-10% Vol. 3-Wire output 4-20 mA transmitter. CSA certified for use in Class I Div 1.

Configure

$3,315.00 
(2969)

CALIBRATION TECHNOLOGIES  GG-R22-0500

CTI GasGuard R Refrigerant Infrared Sensor for R22, R134a, R401a, R402a, R404a, R407a, R407c, R422d, R434a and R507a. (0-500 or 0-3000 ppm) for gas leak detection in refrigeration systems, food processing areas, bottling plants and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,547.15 
(2964)

CALIBRATION TECHNOLOGIES  GG-CO2-1

CTI GasGuard CO2 Carbon Dioxide Infrared Sensor (0-1%, 0-3% and 0-5%) for gas leak detection in wineries, food processing areas, bottling plants and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,547.15 
(2965)

CALIBRATION TECHNOLOGIES  GG-H2-EC-2000

CTI GasGuard H2 Hydrogen Catalytic Bead Sensor 0-1% (10000 ppm or 25%LEL) for gas leak detection in battery charging rooms, steel industry, refineries and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,142.66 
(4137)

CALIBRATION TECHNOLOGIES  GG-LEL2-CH4

CTI GG-LEL2 Combustible Catalytic Bead Gas Detector Transmitter (0-100% LEL) for Methane (CH4), Hydrogen (H2), Propane (C3H8), N-Butane (C4H10), Ethane (C2H6), Ethylene (C2H4), N-hexane (C6H14) or N-pentane (C5H12). 4-20 mA output, 24VDC power supply. Explosion proof Copper-free aluminum enclosure for Class l, Div 1, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved. Optional Relay output.

Configure

$1,165.94 
(7295)

GDS  GM/BX-1-70-R0100/0-00-R000/0

GDS GASMAX BX Gas Detector for Combustibles 0-100% LEL, Catalytic Bead Sensor, 3-wire. Includes 4-20mA analog output and optional 3X isolated 5A alarm relays and MODBUS interface. TFT backlit display. CSA Class I Div 1. Optional calibration to: Methane, Ethane, Propane, Butane, Ethylene, Hydrogen, Pentane, Hexane, Isopropyl Alcohol, Methanol, Ethanol, MEK, etc.

Configure

$2,215.00 
(2955)

INTEC  I-M308WV

Intec Controls I-M308 Infrared (NDIR) Gas Transmitter for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-(5)10 V) or current (4-20 mA) output signal. Wall or Duct mounted. Tri-color LED (normal/warning/alarm) and 24 VAC/VDC powered.

Configure

$166.68 
(2956)

INTEC  I-M350WV-R000

Intec Controls I-M350 Infrared (NDIR) Gas Transmitter and Control System for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-10 V) or current (4-20 mA) output signal. Includes relay. Wall or Duct mounted. Tri-color LED (normal/warning/alarm). Optional ouput control, audible alarm, LCD Display and relative humidity measurement.

Configure

$191.88 
(1547)

HONEYWELL  IR-F9-CO2-1-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Carbon Dioxide (CO2) with 4-20 mA output, 24VDC Power, NEMA-1 enclosure.

Configure

$2,311.99 
(6596)

HONEYWELL  IR-F9-HFO1234yf-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant HFO1234yf with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(1548)

HONEYWELL  IR-F9-NH3-0/2-N1

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Ammonia (NH3) 0-20000 ppm with 4-20 mA output, 24VDC Power, NEMA-1 enclosure.

Configure

 
(1540)

HONEYWELL  IR-F9-R134a-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R134a with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(6594)

HONEYWELL  IR-F9-R22-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R22 with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(6590)

HONEYWELL  IR-F9-R404a-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R404a with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(6595)

HONEYWELL  IR-F9-R407a-0500-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R407a with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(1545)

HONEYWELL  IR-F9-R410a-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R410a with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,396.14 
(6593)

HONEYWELL  IR-F9-R422d-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R422d with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,311.99 
(6592)

HONEYWELL  IR-F9-R507a-1000-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Refrigerant R507a with 4-20 mA output, 24VDC Power, NEMA-1 or Stainless Steel enclosure.

Configure

$2,396.14 
(1522)

BW  M5IR-0000-A-D-D-Y-N-00

BW GasAlertMicro 5 IR (infrared) for CO2 (carbon dioxide) portable gas detector BASE UNIT configurator.

Configure

 
(6135)

GAS CLIP  MGC-S

Gas Clip MGC-S Simple Portable 4-gas detector for Hydrogen Sulfide (H2S) 0 - 100 ppm, Carbon Monoxide (CO) 0 - 500 ppm, Oxygen (O2) 0 - 30% vol and combustible gases (0 - 100% LEL). Electrochemical and Infrared (IR) Sensors. 2 year lifetime. One button operation. Visual, vibrating and audible alarms. IP68. CSA, IECEx and ATEX approvals.



$632.71 
(2135)

HONEYWELL  MPD-UTCB1

XNX MPD UL/CSA Remote Mounted Catalytic Bead Sensor Assembly sensor 0-100% LEL

Configure

$1,122.40 
(6470)

INDUSTRIAL SCIENTIFIC  MX6-00000301

Industrial Scientific MX6 iBrid Multi Gas Detector for up to 6 gases. Detects Oxygen (O2), toxic gases, combustible gases (LEL) and volatile organic compounds (VOCs). Catalitic Bead, Electrochemical, Infrared or PID sensors. Includes Full-color LCD Display and 95dB audible alarm. Concussion-proof overmold. IP64. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

 
(6617)

HONEYWELL  OELDBXXXXXADNUX

Honeywell OELD (Optima Excel Junction Box and Local Display) for Searchline Excel and Searchpoint Optima Plus hydrocarbons infrared detectors. Includes LCD screen for gas information, traffic light status indicator and Bluetooth connectivity. Direct or remotely mounted. ATEX/IECEx or cULus versions. Searchline or Searchpoint detectors not included.

Configure

$1,046.22 
(6799)

PROSENSE  P-3012PE

Prosense P-XY12PE Gas Detector with Catalytic Bead sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, n-Butane, Propane or Hydrogen) with range 0-100% LEL. Ex-proof housing and Nickel Plated Brass sensor head. 4-20 mA Analog output. Optional Relay Outputs. ATEX/IECEx approval. IP65.

Configure

$268.99 
(6800)

PROSENSE  P-3012PEK

Prosense P-XY12PEK Gas Detector with Catalytic Bead and Motion sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, n-Butane, Propane or Hydrogen) with range 0-100% LEL. Ex-proof housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. ATEX/IECEx approval. IP65.

Configure

$322.78 
(6722)

PROSENSE  P-3033

Prosense P-XY35 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$833.84 
(6721)

PROSENSE  P-3035

Prosense P-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$457.27 
(6774)

PROSENSE  P-5235

Prosense P-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$457.27 
(6779)

PROSENSE  P-6035

Prosense P-6035 Gas Detector with Catalytic Bead sensor for Acetylene (C2H2) with range 0-100%LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$564.86 
(6786)

PROSENSE  P-7133

Prosense P-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with range 0-5000ppm or 0-5% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$860.75 
(6801)

PROSENSE  PC3-3012

Prosense PC3-XY12 Gas Detector with Catalytic Bead sensor for Hydrocarbons (LPG, Methane, n-Butane, Propane, Hydrogen or Pentane) with range 0-100% LEL. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$242.08 
(7027)

DET-TRONICS  PIRECLA11A1BT2

Det-tronics PointWatch Eclipse PIRECL Infrared Gas Detector for detection of Hydrocarbons (methane, propane, ethylene, butane) 0 to 100% LFL. Diffusion based. 4-20 mA signal with HART and RS-485 serial communication. Optional relay output. Explosion-proof and stainless steel housing. 24 Vdc. Certified for use in Class I, Div 1 and Div 2. FM, CSA, ATEX, IECEx, DNV/MED, and INMETRO certifications.

Configure

 
(6815)

PROSENSE  PPS-LPG

Prosense PPS-LPG Addressable Gas Detector with Catalytic Bead sensor for Liquid Petroleum Gas (LPG) with range 0-100% LEL. ABS Plastic housing. Modbus RS485 RTU output and two alarm relays (Alarm1 and Fault). IP54. For Parking Garages and Tunnels. PPS+ detectors cannot be used either stand alone or integrated to 3rd party systems, work with PPS Manager PPS-KP alarm panel only.



$228.98 
(6719)

PROSENSE  PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,246.28 
(6718)

PROSENSE  PQD-3035-1/2

Prosense PQD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$851.78 
(6736)

PROSENSE  PQD-5235-1/2

Prosense PQD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$851.78 
(6740)

PROSENSE  PQD-6035-1/2

Prosense PQD-6035 Gas Detector with Catalytic Bead sensor for Acetylene (C2H2) with range 0-100%LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$968.34 
(6747)

PROSENSE  PQD-7133-1/2

Prosense PQD-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,273.19 
(6946)

PROSENSE  PQN-3033-1/2

Prosense PQN-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,075.93 
(6947)

PROSENSE  PQN-3035-1/2

Prosense PQN-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$681.42 
(6950)

PROSENSE  PQN-5235-1/2

Prosense PQN-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$681.42 
(6951)

PROSENSE  PQN-6035-1/2

Prosense PQN-6035 Gas Detector with Catalytic Bead sensor for Acetylene (C2H2) with range 0-100%LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$797.98 
(6959)

PROSENSE  PQN-7133-1/2

Prosense PQN-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,102.83 
(7061)

PROSENSE  PQ-SMPSYS-IR-30

Prosense Sampling System with PQD Infrared Detector to monitor combustible gases. Includes pump, temperature control unit, 100 micron particulate and humidity filter, two solenoid valves, cooler and timer. Modbus RTU, 4-20 mA, 2 Alarm and 1 Fault Relay outputs. IP65 ABS plastic enclosure. Can be calibrated to Methane, LPG Propane, Petrol/Gasoline Vapor, Butane, Pentane, Hexane and other Hydrocarbons.

Configure

 
(7316)

PROSENSE  PXD-3033-1/2

Prosense PXD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Pentane, Propylene and other explosive Hidrocarbons) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,129.73 
(7321)

PROSENSE  PXD-3035-1/2

Prosense PXD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Hexane, Hydrogen, Pentane, Toluene, Methyl Alcohol, Heptane, Octane, Ethyl Alcohol, Carbon Monoxide, Acetone, Ethylene, Ethane, Propylene, Xylene, Benzene and more) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$771.08 
(7339)

PROSENSE  PXD-5235-1/2

Prosense PXD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$771.08 
(7341)

PROSENSE  PXD-7133-1/2

Prosense PXD-7133 Gas Detector with Infrared sensor for Carbon Dioxide with range 0-5000ppm to 0-60% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,156.62 
(7343)

PROSENSE  PXD-7231-1/2

Prosense PXD-7231 Gas Detector with Semiconductor or Infrared sensor for Refrigerant (Freon, A2L, R507, R1234ze) with range 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,075.93 
(7363)

PROSENSE  PXD-9433-1/2

Prosense PXD-9433 Gas Detector with Infrared sensor for Sulfur Hexafluoride (SF6) with range 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$3,066.41 
(7317)

PROSENSE  PXN-3033-1/2

Prosense PXN-XY33 Gas Detector with Infrared sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Pentane, Propylene and other explosive Hidrocarbons) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$977.30 
(7322)

PROSENSE  PXN-3035-1/2

Prosense PXN-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Hexane, Hydrogen, Pentane, Toluene, Methyl Alcohol, Heptane, Octane, Ethyl Alcohol, Carbon Monoxide, Acetone, Ethylene, Ethane, Propylene, Xylene, Benzene and more) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$618.66 
(7340)

PROSENSE  PXN-5235-1/2

Prosense PXN-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$618.66 
(7342)

PROSENSE  PXN-7133-1/2

Prosense PXN-7133 Gas Detector with Infrared sensor for Carbon Dioxide with range 0-5000ppm to 0-60% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,004.20 
(7344)

PROSENSE  PXN-7231-1/2

Prosense PXN-7231 Gas Detector with Infrared sensor for Refrigerant (Freon, A2L, R507, R1234ze) with range 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$923.50 
(7364)

PROSENSE  PXN-9433-1/2

Prosense PXN-9433 Gas Detector with Infrared sensor for Sulfur Hexafluoride (SF6) with range 0-2000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$2,913.98 
(6606)

DETCON  S927-400000-100

Detcon IR-700-CO2 Infrared Carbon Dioxide ITM (Intelligent Transmitter Module) Spare Part.

Configure

 
(6206)

DELPHIAN  SD-364-850-01

DELPHIAN SD Sample Draw Gas Detector and Monitoring System configured for Determinator Infrared Combustible Hydrocarbon (CHC) MultiGas Detector for up to 5 gases (5-999% LEL). Explosion proof. Includes 4-20 ma Output and 5 Digit LED Display (optional alarm relays). FMRC and CSA approvals for Class I Div 1 Groups A,B,C,D. Available gases: Acetone, Benzene, Butadiene, Butane, Butanol, Cyclohexane, Ethane, Ethanol, Ethylene, Ethylene Oxide, Gasoline, Heptane, Hexane, Iso Pentane, Isopropanol, Methane, Methanol, Pentane, Propane, Propyl Alcohol, Propylene, Styrene, Toluene and Xylene. Includes IR Determinator, calibration tool, venturi eductor or motorized pump, 3 way valve and rotameter (optional enclosure).

Configure

 
(1475)

HONEYWELL  SPSTAXF1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Methane (CH4) 0-100% LEL (combustibles) complete with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 3 wire bridge output. ATEX Approved. Poison resistant catalytic bead.

Configure

$554.63 
(4155)

HONEYWELL  SPXCDALMRFD

Honeywell Sensepoint XCD RFD (Remote Flammable Detector) for use with remotely mounted catalytic bead or infrared flammable gas sensors. TRANSMITTER ONLY. Adjustable gas range from 0-100%LEL to 0-20%LEL. Tri-colour backit display. 4-20 mA Output. Sensor can be mounted up to 30 metres (100 feet) from transmitter. ATEX/IECEX & AP Certified with LM25 entry.

Configure

$1,569.88 
(4975)

HONEYWELL  SPXCDALMTXF

Honeywell Sensepoint XCD RTD Transmitter only, tri-color LCD Display, 4-20 mA, 3 Relays, ATEX certified, Flammable (Catalytic Bead) IR (Infrared), Aluminum , ATEX



$1,242.59 
(1893)

HONEYWELL  SPXCDDMF

Replacement display module for Flammable Catalytic Bead and IR (Infrared) Honeywell XCD Detectors. Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and requires configuration after fitting via the menu.

Configure

$669.47 
(661)

HONEYWELL  SPXCDULNB1

Honeywell XCD Sensepoint Gas Detector, Carbon Dioxide (CO2) Infrared Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for carbon dioxide (CO2) 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 2%Vol. only UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,991.38 
(658)

HONEYWELL  SPXCDULNFX

Honeywell XCD Sensepoint Gas Detector, CATALYTIC BEAD combustible 0-100% LEL (Lower Explosive Limit) Methane CH4 (LNG-natural gas), Propane C3H8 (LPG), Butane C4H10, Pentane, Hexane, Ethanol, Hydrogen with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66, 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay and 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 20%-100%, can be calibrated to several other combustible gases. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,579.46 
(660)

HONEYWELL  SPXCDULNPX

Honeywell XCD Sensepoint Gas Detector, Infrared Sensor for Propane (C3H8), Ethylene (C2H4), Butane (C4H10) & Pentane (C5H12) combustible 0-100% LEL (Lower Explosive Limit) with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66, 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay and 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 20%-100%. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$2,085.36 
(3000)

HONEYWELL  SPXCDULNRFD

Honeywell Sensepoint XCD RFD (Remote Flammable Detector) for use with remotely mounted catalytic bead or infrared flammable gas sensors. TRANSMITTER ONLY. Adjustable gas range from 0-100%LEL to 0-20%LEL. Tri-colour backit display. 4-20 mA Output. Sensor can be mounted up to 30 metres (100 feet) from transmitter. cCSAus Certified for North America. Class I, Div 1, Groups B, C, & D.

Configure

$1,265.16 
(659)

HONEYWELL  SPXCDULNRX

Honeywell XCD Sensepoint Gas Detector, Methane (Natural Gas) (CH4) Infrared Sensor combustible 0-100% LEL (Lower Explosive Limit) with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66. 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay and 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 20%-100%. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,626.32 
(5970)

HONEYWELL  SPXCDULNTXF

Honeywell Sensepoint XCD transmitter, UL/CSA/INMETRO approved, Flammable Catalytic Bead/IR (Infrared) 3/4 NPT entry, UL



$1,292.25 
(676)

HONEYWELL  SPXCDXSB1SS

Replacement Sensor Cartridge for Carbon Dioxide (CO2) IR (Infrared) XCD Detector 0-2.00%VOL



$1,147.79 
(674)

HONEYWELL  SPXCDXSPXSS

Replacement Sensor Cartridge for Flammable IR (Infrared) XCD Detector 0-100% LEL Propane (C3H8) (20.0 to 100.0%LEL, 10%LEL)



$1,147.79 
(673)

HONEYWELL  SPXCDXSRXSS

Replacement Sensor Cartridge for Flammable IR (Infrared) XCD Detector 0-100% LEL Methane (CH4) (20.0 to 100.0%LEL)



$1,147.79 
(7373)

PROSENSE  SV-3002

Prosense SafeVader SV-3002 Fixed Gas Detector with Catalytic Bead sensor for Hydrocarbons (Methane, Propane, Butane, LPG, Hydrogen, Gasoline/Petrol Vapor and other combustibles) with range 0-100% LEL. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$209.67 
(7374)

PROSENSE  SV-3003

Prosense SafeVader SV-3003 Fixed Gas Detector with Infrared sensor for Hydrocarbons (Methane, Propane, Butane, LPG, Pentane, Gasoline/Petrol Vapor, Propylene and other combustibles) with range 0-100% LEL. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$629.01 
(7385)

PROSENSE  SV-7103

Prosense SafeVader SV-7103 Fixed Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with range 0-5000 ppm to 0-60% Vol. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$655.21 
(7398)

PROSENSE  SV-9403

Prosense SafeVader SV-9403 Fixed Gas Detector with Infrared sensor for Sulfur Hexafluoride (SF6) with range 0-2000ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.



$2,620.86 
(1944)

HONEYWELL  XNXUTAINNNNN

Honeywell XNX Universal Display and Transmitter for IR infrared input compatible with Optima Plus and Excel Open Path sensors, with aluminum alloy LM25 housing (optional stainless steel), 3-wire 4-20 mA HART loop, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs, UL, ATEX or INMETRO certified.

Configure

$1,189.24 
(851)

HONEYWELL  XNXUTAINNNNN-2108N4110

Honeywell XNX Universal Gas Detector Transmitter with Optima Plus Infrared Hydrocarbon Gas Detector combustible 0-100% LEL (Lower Explosive Limit) and aluminum housing. The XNX is compatible with all Honeywell gas sensing technologies. 3-wire 4-20 mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs. UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2 . Available for over 100 gas and vapour calibrations. . Optional Alarm Relays, Modbus, Fieldbus.

Configure

$4,027.56 
(852)

HONEYWELL  XNXUTAVNNCB1

Honeywell XNX Universal Gas Detector Transmitter including MPD CATALYTIC BEAD sensor combustible 0-100% LEL (Lower Explosive Limit) Methane (Natural Gas) or other combustibles. Backlit LCD Display, HART over 4-20 mA output,UL/CSA approved, 5 x 3/4"NPT entries and painted Aluminum. UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2, INMETRO. Optional Alarm Relays, Modbus, Fieldbus.

Configure

$1,997.55 
(2137)

HONEYWELL  XNXUTAVNNIC1

Honeywell XNX Universal Gas Detector Transmitter including MPD AMIC1 IR (infrared) CO2 Carbon Dioxide sensor 0-1%/0-5% Vol. Backlit LCD Display, HART over 4-20 mA output,UL/CSA approved, 5 x 3/4"NPT entries and painted Aluminum. UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2. Optional Alarm Relays, Modbus, Fieldbus.

Configure

$2,630.63 
(1225)

HONEYWELL  XNXUTAVNNIF1

Honeywell XNX Universal Gas Detector Transmitter with MPD-AMIF1 IR Infrared sensor for %LEL Propane (C3H8) 0-100% LEL or Methane (CH4) 0-100% LEL and aluminum housing. The XNX is compatible with all Honeywell gas sensing technologies. 3-wire 4-20 mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs. UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2. Optional Alarm Relays, Modbus, Fieldbus. *** Detector will be provided as two separate items: XNX transmitter & MPD sensor head, to be assembled by the end user ***

Configure

$2,629.91 
(2141)

HONEYWELL  XNXUTAVNNIV1

Honeywell XNX Universal Gas Detector Transmitter including MPD-AM1V1 IR Infrared sensor combustible 0-5% Vol 0-100% LEL (Lower Explosive Limit) Methane (Natural Gas). Backlit LCD Display, HART over 4-20 mA output,UL/CSA approved, 5 x 3/4"NPT entries and painted Aluminum. UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2. Optional Alarm Relays, Modbus, Fieldbus. *** Detector will be provided as two separate items: XNX transmitter & MPD sensor head, to be assembled by the end user ***

Configure

$2,749.40 
MIRAMAR AUTOMATION LLC       
....
AI Automation Services


Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.