Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
SPECTREX 40/40I-111AC (1)
  • Overview
  • Features
  • Specs
  • ACCESSORIES & RELATED
  • Literature

SPECTREX SharpEye 40/40I Triple IR (IR3) Flame Detector multi spectrum based on three IR bands (IR3), detects fuel and gas fires at long distances with the highest immunity to false alarms. Can detect several fuels, a 1ft2 (0.1m2) gasoline pan fire at 215 ft (65m) in less than 5 seconds. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Automatic and Manual Built-In-Test (BIT) feature included. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-I ***

Inquiry

The 40/40I is the most durable and weather resistant flame detector currently on the market. Its new features include a heated window, to eliminate condensation and icing; HART capabilities for digital communications; lower power requirements; and a compact, lighter design.

Due to increased reliability, the 40/40 Series warranty period has been extended to 5 years and is approved to IEC 61508 Safety Integrity requirements of SIL2.

Features
  • Triple Spectrum Design - for long distance detection and high false alarm immunity
  • Sensitivity Selection - to ensure no zone crossover detection
  • Automatic and Manual Built-In-Test (BIT) - to assure continued reliable operation
  • Heated window - for operation in harsh weather conditions (snow, ice, condensation)
  • Multiple output options for maximum flexibility and compatibility
    • Relays (3) for Alarm, Fault and Auxiliary
    • 0-20mA (stepped)
    • HART Protocol for maintenance and asset management
    • RS-485, Modbus Compatible
  • High Reliability - MTBF - minimum 150,000 hours
  • Approved to Safety Integrity Level 2 (SIL2 – TUV)
  • 5-Year Warranty
  • User Programmable via HART or RS-485
  • Ex approved for Zone 1 hazardous area location
    • ATEX
    • IECEx
    • FM
    • CSA
  • 3rd party Performance Tested
    • EN54-10 (LPCB)
    • FM3260 (FM)
    • DNV Marine Approval
Applications

Offshore Oil & Gas installations Power Generationfacilities
Onshore Oil & Gas installations and pipelines Pharmaceutical Industry
Chemical plants Printing Industry
Petrochemicals plants Warehouses
Storage Tank farms Automotive Industry
Aircraft hangars Explosives & Munitions
Waste Disposal facilities  

GENERAL SPECIFICATIONS
Spectral Response Three IR Bands
Detection Range
(at highest Sensitivity Setting for 1ft2 (0.1m2) pan fire)
Fuel ft / m
n-Heptane 215 / 65
Gasoline 215 / 65
Diesel Fuel 150 / 45
JP5 150 / 45
Kerosene 150 / 45
Ethanol 95% 135 / 40
Methanol 115 / 35
IPA (Isopropyl Alcohol 135 / 40
Methane* 100 / 30
LPG (Liquid Propane Gas)* 100 / 30
Polypropylene Pellets 16 / 5
Office Paper 33/ 10
* 20" (0.5m) high, 8" (0.2m) width plume fire
Response Time Typically 5 seconds
Adjustable Time Delay Up to 30 seconds
Sensitivity Ranges 4 Sensitive ranges for 1 ft 2 (0.1m2) n-heptane pan fire from 50 ft (15m) to 215 ft (65m)
Field of View Horizontal 100º; Vertical 95º
Built-in-Test (BIT) Automatic (and Manual)
Temperature Range Operating: -67ºF to +167ºF (-55ºC to +75ºC)
Option: -67ºF to +185ºF (-55ºC to +85ºC)
Storage: -67ºF to +185ºF (-55ºC to +85ºC)
Humidity Up to 95% non-condensing (withstands up to 100% RH for short periods)
Heated Optics To eliminate condensation and icing on the window
ELECTRICAL SPECIFICATIONS
Operating Voltage 24 VDC nominal (18-32 VDC)
Power Consumption Standby: Max. 100mA (150mA with heated window)
Alarm: Max. 150mA (200mA with heated window)
Cable Entries 2 x 3/4" - 14NPT conduits or 2 x M25 x 1.5 mm ISO
Wiring 12 - 22AWG (2.5mm 2 - 0.3mm 2)
Electrical Input Protection According to MIL-STD-1275B
Electromagnetic Compatibility EMI/RFI protected to EN50130-4
Electrical Interface The detector includes twelve (12) terminals with five (5) wiring options (factory set)
OUTPUTS
Relays Alarm, Fault and Auxiliary
SPST volt-free contacts rated 5A at 30 VDC or 250 VAC.
0-20mA (stepped) Sink (source option) configuration
Fault: 0 +1mA
BIT Fault: 2mA ± 10%
Normal: 5mA ± 10%
Warning: 10mA ± 5%
Alarm: 15mA ± 5%
Resistance Loop: 100-600 Ω
HART Protocol HART communication on the 0-20mA analog current (FSK) - used for maintenance, configuration changes and asset management
RS-485 RS-485 Modbus compatible communication link that can be used in computer controlled
installations
MECHANICAL SPECIFICATIONS
Materials
Enclosure options
- Stainless Steel 316L with electro polish finish
- Heavy duty copper free aluminum (less than 1%), red epoxy enamel finish
Mounting Stainless Steel 316L with electro polish finish
Dimensions Detector 3.5" x 4.5" x 6.1" (90 x 114 x 156 mm)
Weight Detector (St.St.) 5.5 lb (2.5 kg)
Detector, aluminum 2.5 lb (1.2 kg)
Tilt mount 2.2 lb (1.0 kg)
Environmental Standards Meets MIL-STD-810C for Humidity, Salt & Fog, Vibration, Mechanical Shock, High Temp, Low Temp
Water and Dust IP66 and IP67 per EN60529, NEMA 250 6P
APPROVALS
Hazardous Area
ATEX and IECEx Ex II 2 GD,  
  Ex de IIB+H2 T5 o (-5+55 ºCºC 7 x de IIB+H2 T4 (-55ºC to + 85ºC)
  Ex tD A21 IP66/X7 T 95ºC Ex tD A21 IP66/X7 T 105ºC
FM / CSA Class I Div. 1, Groups B, C & D  
  Class II/III Div. 1, Groups E, F & G  
Performance EN54-10 (LPCB)
FM-3260 (FM)
DNV Marine Approval
Reliability IEC61508 - SIL2 (TUV)
ACCESSORIES
Fire Simulator20/20-310
Weather Protector777163
Laser Pointer
(Detector area coverage)
777166
Tilt Mount40/40-003
Air Shield777161
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)90318099

  • ACCESSORIES > SPECTREX FLAME DETECTORS
    789260-2 Pole mount (U-bolt) - 2" for SPECTREX SharpEye flame detectors (does not include required 40/40-001 tilt mount) ..

  • ACCESSORIES > SPECTREX FLAME DETECTORS
    794079-5 USB RS485 Harness Kit with RS485/232 converter, used with Spectrex Host software, enables the user to connect to any available PC or laptop to re-configure settings or perform diagnostics on all 40/40 and 20/20 series flame detectors. Includes Host Softw ..

  • ACCESSORIES > SPECTREX FLAME DETECTORS
    888810 Emerson HART Hand-Held Diagnostics Unit c/w converter and cable harness (1m), software and manual in case. For SPECTREX SharpEye flame detectors and Quasar 900 gas detectors, certified I.S. (EExia) ..

  • ACCESSORIES > SPECTREX FLAME SIMULATORS
    FS-1100 SPECTREX FS-1100 Long range flame simulator for all Spectrex IR3 / Multi-IR Flame Detectors. Approved for Zone 1 and Zone 2 hazardous areas. Up to 40ft testing distance. Includes rechargeable Lithium-ion battery, charger, built-in beam collimator, tool k ..

> TRIPLE IR :    10 Items found.
20/20MPI-R
(2940)

SPECTREX  20/20MPI-R

SPECTREX Sharp Eye 20/20MPI IR3 Flame Detector for indoor applications. Low cost, High Performance, High Reliability and Long Distance for hydrocarbon-based fuel and gas fires. Polycarbonate housing. 2 Relays (Alarm and Fault) OR 0-20mA output and compatible with RS-485 Modbus. IP55. Includes Tilt mount and protective cover. Automatic and Manual Built-In-Test (BIT), indoor use. Available Approvals: FM3260 and EN54-10 (Pending).

Configure

$1,464.61 
16519-20
(6731)

FIRERAY  16519-20

Fireray Talentum 16519-20 Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$1,759.20 
100-0017-01
(4720)

ESP SAFETY  100-0017-01

ESP Safety IPES-IR3 Infrared Flame Detector for detection of combustible vapors gases fires. Rapid flame recognition and alarm signaling. Sends an alarm only when data from 3 different IR wavelengths detects a flame. RS-485, Modbus RTU, 4-20mA and relay outputs. Tri-Color status LED. Explosion-proof Housing. IP66. Designed for Class I, Division 1, Group B, C & D. SIL3 Rated. Includes protective visor, stainless steel mounting bracket and hardware.

Configure

$1,805.25 
FSL100-IR3
(6772)

HONEYWELL  FSL100-IR3

Honeywell FSL100-IR3 Flame Detector for robust, fast, and reliable detection of liquid hydrocarbon and dirty fires in indoor/outdoor environments and potentially explosive atmospheres. Relay and mA outputs. GRP housing. EN54-10 and FM3260 approvals. IP65.

Configure

$2,095.18 
20/20MI-11-S-F
(2945)

SPECTREX  20/20MI-11-S-F

SPECTREX Sharp Eye 20/20MI Mini Triple IR (IR3) Flame Detector for detection of gasoline, n-heptane, diesel, JP5 jet fuel, kerosene, ethanol, IPA, methanol, methane, LPG propane, hydrogen, polypropilene, hydroxy fuels, hydrazine, paint spray and paper fires. Low cost, stainless steel enclosure, compact and lightweight. Highly resistant to harsh environments, immune to false alarms and designed for OUTDOOR or INDOOR applications. 2 Relays (Alarm and Fault-not with Ex), 0-20mA (sink or source), automatic and Manual Built-In-Test (BIT) and compatible with RS-485 Modbus. Stainless steel housing. Available Approvals: FM (Functionality, No Ex)

Configure

$2,225.11 
16589-20
(6730)

FIRERAY  16589-20

Fireray Talentum 16589-20 IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66.

Configure

$2,366.40 
16219-20
(6732)

FIRERAY  16219-20

Fireray Talentum 16219-20 Flameproof (Exd) IR3 Flame Detector for High Ambient Temperature. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$2,953.08 
40/40C-I-6-41-AC-N-7
(6857)

SPECTREX  40/40C-I-6-41-AC-N-7

SPECTREX SharpEye 40/40C-I Multispectrum Quad-Sense™ Flame Detector with IR3 technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA® 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,907.40 
16549-20
(6733)

FIRERAY  16549-20

Fireray Talentum 16549-20 Stainless Steel Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$3,945.60 
40/40D-I-6-31-AC-N-7
(6883)

SPECTREX  40/40D-I-6-31-AC-N-7

SPECTREX SharpEye 40/40D-I Ultra Fast Multispectrum Quad-Sense™ Flame Detector with IR3 technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA® 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$4,298.29