Macurco Nd-2 | Nitrogen Dioxide | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

MACURCO   ND-2

SKU# (657)
MACURCO ND-2

DETECTORS / GAS DETECTORS (GENERAL-PURPOSE)
NITROGEN DIOXIDE

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Macurco ND-2 nitrogen dioxide gas detector and transducer features a digital display (0-9 ppm), NEMA 1 enclosure, 12-24 VAC or VDC operation, adjustable relay and 4-20 mA output. For use with the Macurco DVP-120 control panel and HVAC/Building Automation Systems. ***** DISCONTINUED **** Replaced by CX-6-NO2

DISPLAY   4-20 mA   RELAYS

Inquiry

REPLACED BY TX-6-ND

FEATURES
  • Automatic Ventilation Controller
  • 4 to 20 mA Output, for 0 to 6 ppm
  • Microcomputer Controlled
  • Digital Display: 0 to 9 PPM NO2
  • Highly Linear Electrochemical Sensor
  • Relay w/Selectable Set Points & Delay
  • Diesel Exhaust Detection and Control
  • Specific to Nitrogen Dioxide.
  • Provides Nitrogen Dioxide detection, digital display of gas concentration, 4 to 20 mA output, and a relay to automatically control exhaust fans or other devices
  • ND-2 works on a wide range of power: 12 to 24 VAC or VDC
  • Meets the requirements of OSHA and the state of Wisconsin.
  • Housed in Nema 1, UL listed, metal knockout case.
  • Internally adjustable switch for relay delay from 0.5 to 5 minutes
  • Bright LED's show relay status: flashes during delay period, is on steady when the relay closes.
  • Reyearsplacement sensors and field calibration kit available. Normal sensor life is over 2 years.
  • Isolated 4 to 20 mA output (1000 volts) so common power supplies can be used
Parking Garage Warehouse Maintenance Facility
Ice Skating Arena Storage Facility

ND2 Specifications
Power 1.2 Watts from 12 to 24 VAC or VDC
Size 6 X 6 X 3 inches
Color Gray
Shipping Weight 3 pounds
Relay 5 amps, 240VAC, pilot duty, SPDT
Relay Set Point 0.5 to 3.0 PPM
Operating Environment 0 to 125° F, 10 to 90% RH
Linearity Within 1%
Accuracy (after calibration) +/- 3%
Sensor Output Droop Less than 2% a month.
All Units are Factory Calibrated
Typical Coverage 5000 square feet per unit

 Info/Quote Request
 Reseller & Volume Discounts

> ACCESSORIES - RELATED - CONSUMABLES :    2 Items found.
DMK-1
(643)

MACURCO  DMK-1

Macurco DMK-1 Duct Mount Kit provides a means to duct mount standard 4 x 4 Macurco fixed gas detectors (single gang type need mud-ring). The DMK-1 features an air tight enclosure, clear cover that allows view of detector status lights, ... more



$219.45 
Cal-Kit2-NO2-5PPM-AL
(646)

MACURCO  Cal-Kit2-NO2-5PPM-AL

Macurco Cal-Kit 2 Nitrogen Dioxide (NO2) 5 ppm gas field calibration kit to calibrate Macurco gas detectors. 34 Liter Aluminum Cylinder with C-10 female Inlet. Includes Carry Case, Regulator, Tubing and calibration hood 2ft. 1/cs. 30-0021-1110-1 & 37-0450-4134-2



$1,061.83 
> NITROGEN DIOXIDE :    37 Items found.
PPS+-NO2
(6814)

PROSENSE  PPS+-NO2

Prosense PPS+-NO2 Addressable Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. ABS Plastic housing. Modbus RS485 RTU output. IP54. For Parking Garages and Tunnels. PPS+ detectors cannot be used either stand alone or integrated ... more



$301.32 
M001-0011-000
(6004)

MPOWER  M001-0011-000

mPower UNI MP100 Portable Single Gas Detector for detection of Nitrogen Dioxide (NO2) 0-20 ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class ... more



$325.08 
TX1-4
(5967)

INDUSTRIAL SCIENTIFIC  TX1-4

Industrial Scientific Tango TX1 Gas Detector for Nitrogen Dioxide (NO2) 1-150 ppm. DualSense Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

 
70-2900-0506-1
(7308)

AIMSAFETY  70-2900-0506-1

AimSafety PM100 Portable Gas Detector (Two Year Disposable) for Nitrogen Dioxide (NO2) 0-20 ppm. LCD display. Audible, visual and vibrating alarms. IP67. UL & CSA Class I Div 1, Div 2, ATEX, IECEx, INMETRO.



$440.00 
S1-D-Y
(6391)

BW  S1-D-Y

BW Solo Serviceable Single-gas Detector for Nitrogen dioxide (NO2) 0-100 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

 
CX-6-NO2
(2046)

MACURCO  CX-6-NO2

Macurco CX-6-NO2 low voltage Gas Detector, Controller and Transducer for Nitrogen Dioxide (NO2) 0-20 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC. power ETL Listed to ... more

Configure

$547.86 
CX-12-NO2
(3417)

MACURCO  CX-12-NO2

MACURCO CX-12-NO2 line voltage Gas Detector, controller and transducer for Nitrogen Dioxide (NO2) 0-20 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1. (Replaces TX-12-ND)

Configure

$594.78 
364-455-01-365-732-01
(6156)

DELPHIAN  364-455-01-365-732-01

Delphian GazTell Fixed Point Electrochemical Gas Detector for Nitrogen Dioxide (NO2) 0-100ppm. 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
SV-6804
(7383)

PROSENSE  SV-6804

Prosense SafeVader SV-6804 Fixed Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.



$824.78 
PC3-6824
(6809)

PROSENSE  PC3-6824

Prosense PC3-6824 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$933.14 
P-6834
(6784)

PROSENSE  P-6834

Prosense P-6834 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone ... more

Configure

$1,059.50 
PXN-6834-1/2
(7338)

PROSENSE  PXN-6834-1/2

Prosense PXN-6834 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone ... more

Configure

$1,205.30 
GG-NO2-B-10
(5982)

CALIBRATION TECHNOLOGIES  GG-NO2-B-10

CTI GG-NO2-B Electrochemical Gas Sensor for Nitrogen Dioxide (NO2) 0-10 ppm. 4-20 mA output, 24VDC power supply. NEMA 3RX polycarbonate housing. CSA and UL approved.

Configure

$1,249.00 
SPSTAXN1
(1924)

HONEYWELL  SPSTAXN1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Nitrogen dioxide (NO2) 0-10ppm complete with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. ... more

Configure

$1,304.92 
KL0100A1-SS00081A
(7649)

KWIKSENSE  KL0100A1-SS00081A

Uniphos KwikSense Lite Gas Detector with Electrochemical Sensor for Nitrogen Dioxide (NO2) 0-20 ppm. Includes 4-20 mA and 1 Alarm relay outputs, OLED Display, Aluminum Enclosure. ATEX/IECEx/CE/SGS Class I Div 2 Approved, IP66, 3-wire.

Configure

$1,326.00 
PQN-6834-1/2
(6957)

PROSENSE  PQN-6834-1/2

Prosense PQN-6834 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Alarm Relay card. ATEX/IECEx (Zone 1, Zone ... more

Configure

$1,331.66 
PXD-6834-1/2
(7337)

PROSENSE  PXD-6834-1/2

Prosense PXD-6834 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone ... more

Configure

$1,380.26 
1100ALD-109024/007P-L0
(6915)

RC SYSTEMS  1100ALD-109024/007P-L0

RC Systems SenSmart 1100 gas detector for Nitrogen Dioxide (NO2) 0-7 ppm to 0-200 ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20 mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$1,464.54 
2106B1422
(1467)

HONEYWELL  2106B1422

Honeywell Sieger Sensepoint Gas Detector Transmitter for Nitrogen Dioxide (NO2) 0-10 ppm with Surecell Toxic Sensor. 2 wire 4-20 mA loop output. ATEX/IECEx CSA Class I Div 2 Certified.

Configure

$1,476.19 
PQD-6834-1/2
(6745)

PROSENSE  PQD-6834-1/2

Prosense PQD-6834 Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Alarm Relay card. OLED Display. ATEX/IECEx (Zone ... more

Configure

$1,526.07 
Page: 1 | 2 | All
MIRAMAR AUTOMATION LLC       
....

ND-2
MACURCO / Detectors
Gas Detectors (general-purpose) / Nitrogen Dioxide
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.