Name: MACURCO ND-2 GAS DETECTORS (GENERAL-PURPOSE) NITROGEN DIOXIDE
Brand: MACURCO
SKU: 657

MACURCO ND-2

DESCRIPTION
FEATURES
SPECIFICATIONS
LITERATURE

Macurco ND-2 nitrogen dioxide gas detector and transducer features a digital display (0-9ppm), NEMA 1 enclosure, 12-24 VAC or VDC operation, adjustable relay and 4-20mA output. For use with the Macurco DVP-120 control panel and HVAC/Building Automation Systems. ***** DISCONTINUED **** Replaced by TX-6-ND

Inquiry

REPLACED BY TX-6-ND

FEATURES

Automatic Ventilation Controller
4 to 20 mA Output, for 0 to 6 ppm
Microcomputer Controlled
Digital Display: 0 to 9 PPM NO2
Highly Linear Electrochemical Sensor
Relay w/Selectable Set Points & Delay
Diesel Exhaust Detection and Control

Specific to Nitrogen Dioxide.
Provides Nitrogen Dioxide detection, digital display of gas concentration, 4 to 20 mA output, and a relay to automatically control exhaust fans or other devices
ND-2 works on a wide range of power: 12 to 24 VAC or VDC
Meets the requirements of OSHA and the state of Wisconsin.
Housed in Nema 1, UL listed, metal knockout case.
Internally adjustable switch for relay delay from 0.5 to 5 minutes
Bright LED's show relay status: flashes during delay period, is on steady when the relay closes.
Reyearsplacement sensors and field calibration kit available. Normal sensor life is over 2 years.
Isolated 4 to 20 mA output (1000 volts) so common power supplies can be used

Parking Garage	Warehouse	Maintenance Facility
Ice Skating Arena		Storage Facility

ND2	Specifications
Power	1.2 Watts from 12 to 24 VAC or VDC
Size	6 X 6 X 3 inches
Color	Gray
Shipping Weight	3 pounds
Relay	5 amps, 240VAC, pilot duty, SPDT
Relay Set Point	0.5 to 3.0 PPM
Operating Environment	0 to 125° F, 10 to 90% RH
Linearity	Within 1%
Accuracy (after calibration)	+/- 3%
Sensor Output Droop	Less than 2% a month.
All Units are Factory Calibrated
Typical Coverage	5000 square feet per unit

> ACCESSORIES - RELATED - CONSUMABLES : 2 Items found.

(643)

MACURCO DMK-1

Macurco DMK-1 Duct Mount Kit provides a means to duct mount standard 4 x 4 Macurco fixed gas detectors (single gang type need mud-ring). The DMK-1 features an air tight enclosure, clear cover that allows view of detector status lights, hardware, exhaust tube and mounting template. Compatible with CM-6, GD-2A, GD-6, TX-6, CM-2B, CM-3, CM-4, HD-11, ND-2 and GT-11A gas detectors.

$188.12

(646)

MACURCO Cal-Kit 2*NO2-5PPM-AL

Macurco Cal-Kit 2 Nitrogen Dioxide (NO2) 5 ppm gas field calibration kit to calibrate Macurco gas detectors. 34L. Includes Carry Case, Regulator, Tubing and calibration hood 2ft. 1/cs. 30-0021-1110-1 & 70-0714-0531-3

$879.27

> NITROGEN DIOXIDE : 29 Items found.

(5107)

HONEYWELL SPXCDULNN2

Honeywell Sensepoint XCD RTD Gas Detector for Nitrogen dioxide (NO2) with Electrochemical Sensor. Aluminium alloy LM25 or 316 stainless steel housing, PPS sensor head, tri-color backlit LCD Display. IP67. 3-wire 24 VDC power. Includes 3 programmable alarm relays and 4-20mA output (sink or source selectable), Modbus RTU option available. User-Selectable full scale range 0 to 10 ppm. UL/cCSAus Approved for Class I Div 2. Remote Sensor Option.

Configure

$1,735.82

(666)

HONEYWELL SPXCDULNNX

Honeywell XCD Sensepoint Gas Detector, Nitrogen Dioxide (NO2) Electrochemical Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for nitrogen dioxide (NO2) 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 10.0 to 50.0ppm. UL/CSA Class I Division 1 or ATEX (Zone 1) IECEx available.

Configure

$1,763.64

(237)

RC SYSTEMS 2100AL-0-9024/007P/L0

RC Systems SenSmart 2100 2 wire 4-20mA Loop Powered gas detector for Nitrogen Dioxide (NO2) 0-7ppm to 0-200ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Stainless steel or aluminum enclosure. Suitable for Class 1 Div 2 (Non-Incendive).

Configure

$1,789.61

(696)

HONEYWELL S3KUL2-XNXXSN1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring NITROGEN DIOXIDE (NO2) with electrochemical sensor, 2-wire 4-20mA loop, LCD Display, 0-10.0ppm, user adjustable (5.0 to 50.0ppm, 5.0ppm increments) Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$1,789.84

(5786)

RC SYSTEMS 31001AL-0-9024/007P/L0

RC Systems SenSmart 3100 3 wire gas detector for Nitrogen Dioxide (NO2) 0-7ppm to 0-200ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class 1 Div 2 (Non-Incendive).

Configure

$1,967.53

(6096)

DETCON 967-646490-010

Detcon DM-700-NO2 Electrochemical Smart Nitrogen Dioxide (NO2) 0-10 ppm Sensor Assembly with LED display. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

(847)

HONEYWELL XNXUTAENNNNN-XNXXSN1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Nitrogen Dioxide (NO2) 0-10.0ppm, user adjustable (5.0 to 50.0ppm, 5.0ppm increments) compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2

Configure

$2,275.97

(7012)

RC SYSTEMS 6100AL1-0-1024/0005P

RC Systems SenSmart 6100 3 wire Dual Channel Gas Detector for Nitrogen Dioxide (NO2) 0-5ppm to 0-200ppm with 'ST-44' smart transmitter and GEN2 smart Electrochemical sensor. Includes Color TFT Display, 4-20mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. Suitable for Class 1 Div 2 (Non-Incendive). IP66.

Configure

$2,389.61

(7112)

INTERSCAN I-900G-NO2-0010

Interscan GASD 8000 Portable Trace Gas Detector with smart sensor for continuous air sampling of Nitrogen Dioxide (NO2). Anodized aluminum enclosure. Includes rechargeable batteries.

Configure

$6,750.00

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080. Powered by: