Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas

(6054)

AUTOMATION DIRECT FC-3RLY2

Analog to (2) SPDT Relay limit alarm converter powered by 24VAC/VDC and Input signal ranges of 0-15V, 0-30V or 0-20mA. Trip/Release Point programmed via DIP switches. LED’s indicate operating status. 35mm DIN rail or panel mount, removable screw terminal blocks.

$169.20

(4143)

NOTIFIER FCM-1-REL

Notifier FCM-1-REL(A) Series Releasing Control Module for fire suppresion releasing applications. Reports the panel status as NORMAL, OPEN or SHORT CIRCUIT. Analog communications. FlashScan operation. 15 to 32 VDC. UL, FM and CSFM Approved.

(2986)

HONEYWELL FS20X-211-212

Honeywell Fire Sentry FS20X Multi-Spectrum (UV/Dual IR/VIS) Fire and Flame Detector for hydrocarbon and non-hydrocarbonfuel fires in all industrial enviromental conditions. 90° field of view. RS-485 MODBUS communication and 0-20 mA stepped analog output. Includes fire, fault and auxiliary relays. NEMA 4 & 4X enclosure. IP66. FM, ATEX and CE approvals.

Configure

$3,840.83

(1988)

HONEYWELL FS24X-211-21-1

Honeywell Fire Sentry FS24X Series 211 Multi-Spectrum QuadBand Triple IR Fire and Flame Detector for hydrocarbon and non-hydrocarbon fires in all enviromental conditions. 110° field of view. With WireBand Technology, RS-485 ModBus communication and non-isolated 4-20 mA analog output. Includes alarm, fault and fire verification relays. FM, ATEX and CE mark approvals *** Phased Out *** Replaced by FS24X Plus [sku 7141]

(1989)

HONEYWELL FS24X-911-21-5

Honeywell Fire Sentry FS24X Series 911 Multi-Spectrum QuadBand Triple IR Fire and Flame Detector for hydrocarbon and non-hydrocarbon fires in all enviromental conditions. 90° field of view. With WireBand Technology, RS-485 ModBus communication and non-isolated 4-20 mA analog output. Includes alarm, fault and fire verification relays. FM, ATEX, CE and INMETRO mark approvals

Configure

$4,371.15

(2038)

NOTIFIER FSP-951

NOTIFIER by Honeywell FSP-951 Series Intelligent Plug-in Photoelectric Smoke Detector (0.5% to 4% per foot obscuration) with FlashScan and CLIP communication protocol systems. Addressable-analog communication. Optional relay, isolator and sounder bases. UL, ULC, FM and CSFM Approvals. *** Replaces FSP-851 ***

Configure

(596)

GDS GDS-49-REMOTE TRANSMITTER

GDS GDS-49 single channel loop-powered (two-wire) sensor transmitter for toxic / oxygen deficiency applications. Two-wire, non-polarized 4-20mA output. Field-replaceable sensor module. Easily interfaced to all GDS Corp controllers with analog inputs.

(912)

COOL AIR LBW-420-1-SS

Cool Air LBW-420 Ammonia (NH3) 0-100/1000ppm Gas Leak Detector 4-20mA analog output. NEMA 4X enclosure. Alarm, pre-alarm and auxiliary relays. 115/230 VAC, 50/60 Hz, or 24 VDC. User Adjustable ranges: 0-100, 0-250, 0-500 and 0-1000ppm

Configure

$1,631.80

(6055)

COOL AIR LBW-420-LEL-DC-01

Cool Air LBW-420-LEL Ammonia (NH3) 0-9.9% Gas Leak Detector. Includes 4-20mA analog output, 3 latching relays and LED Display. 18-36 VDC (Optional AC). NEMA 4X and UL listed enclosure.

Configure

$1,676.90

(4486)

COOL AIR LBW-WATCHMAN-SS

Cool Air LBW-Watchman Ammonia (NH3) 0-1000ppm Leak Detector. 4-20mA analog output. NEMA 4X, UL Listed enclosure. IP66. 24VDC.

Configure

$1,086.50

(2913)

INTEC LC-1112-A-000-1

Intec Controls PolyGard LC-1112 V3 Analog Gas Transmitter for Carbon Monoxide (CO) 0-150 / 0-200 / 0-250 / 0-300 ppm. 1 4-20mA & 2-10V analog output. Wall mounted. NEMA 4X Enclosure. UL Listed and CSA Certified.

Configure

$327.00

(3543)

INTEC MGC3-02-200

Intec Controls PolyGard MGC3 Two Channel Gas Controller to detect and control levels of toxic and combustible gases. Wall Mounted. Highly configurable. 2 external 4-20mA analog sensors, 1 binary input, 2 alarm relays, 2 open collector outputs and 1 analog output. LCD Display and 4 pushbuttons for configuration. NEMA 4X (IP65) enclosure. UL Certified. *** Phased Out ***

(2947)

MACURCO MRS-485

MACURCO Modbus RS-485 Slave Adapter for use with Macurco 6-Series gas leak detectors to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a Modbus digital signal for use with multipoint addressable systems and control panels such as the DVP-120M. Plugs into the back of the detector.

$118.05

(6836)

OTIS OI-6000-CB2-LEL-X-X-O

Otis Instruments OI-6000 Gas Leak Detector with catalytic bead sensor for Combustibles 0-100 % LEL. Explosion Proof Wired power (3-Wire). (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs. 3 Push-Button Interface. IP 66/67. Optional alarm relays and Radio. CSA Approved for Class I Div 1. ATEX Zone 1 and IECEx Certified.

Configure

(6832)

OTIS OI-6000-EC-CO-X-R-DC-C

Otis Instruments OI-6000 Gas Leak Detector with electrochemical sensor for Carbon Monoxide (CO) 0-1000ppm. Non explosion proof. Wired power (3-Wire) (12 to 35 VDC) with 4-20 mA analog, RS-485 Modbus and 2 relay outputs. 3 Push-Button Interface. IP 66/67. Optional radio. UL Approved.

Configure

(6835)

OTIS OI-6000-EC-CO-X-X-O

Otis Instruments OI-6000 Gas Leak Detector with electrochemical sensor for Carbon Monoxide (CO) 0-1000ppm. Explosion Proof Wired power (3-Wire). (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs. 3 Push-Button Interface. IP 66/67. Optional alarm relays and Radio. CSA Approved for Class I Div 1. ATEX Zone 1 and IECEx Certified.

Configure

(6830)

OTIS OI-6000-EC-H2S-X-R-DC-C

Otis Instruments OI-6000 Gas Leak Detector with electrochemical sensor for Hydrogen Sulfide (H2S) 0-100ppm. Non explosion proof. Wired power (3-Wire) (12 to 35 VDC) with 4-20 mA analog, RS-485 Modbus and 2 relay outputs. 3 Push-Button Interface. IP 66/67. Optional radio. UL Approved.

Configure

(6834)

OTIS OI-6000-EC-H2S-X-X-O

Otis Instruments OI-6000 Gas Leak Detector with electrochemical sensor for Hydrogen Sulfide (H2S) 0-100ppm. Explosion Proof Wired power (3-Wire). (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs. 3 Push-Button Interface. IP 66/67. Optional alarm relays and Radio. CSA Approved for Class I Div 1. ATEX Zone 1 and IECEx Certified.

Configure

(6833)

OTIS OI-6000-IR-LEL-X-R-DC-C

Otis Instruments OI-6000 Gas Leak Detector with infrared sensor for Combustibles 0-100% LEL. Non explosion proof. Wired power (3-Wire) (12 to 35 VDC) with 4-20 mA analog, RS-485 Modbus and 2 relay outputs. 3 Push-Button Interface. IP 66/67. Optional radio. UL Approved.

Configure

(6799)

PROSENSE P-3012PE

Prosense P-XY12PE Gas Detector with Catalytic Bead sensor for Hydrocarbons (LPG, Methane, Petrol Vapour, n-Butane, Propane or Hydrogen) with range 0-100% LEL. Ex-proof housing and Nickel Plated Brass sensor head. 4-20mA Analog output. Optional Relay Outputs. ATEX/IECEx approval. IP65.

Configure

$308.88

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080. Powered by: