Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
HYDROGEN:    620 Items found.
(2927)

PORTAGAS  CYL-90411390

Calibration Gas Hydrogen (H2) 60% LEL 2.4% vol. Balance Air, 100 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$124.51 
(812)

BW  D4-RHM04

Replacement TwinTox sensor - carbon monoxide (CO) and hydrogen sulfide (H2S) for GasAlertMicro5



 
(5261)

KWIKDRAW  D5086858

KwikDraw 2-BOXES Gas Detector Tubes for Hydrogen Chloride 50 - 5000 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5086858



$167.20 
(640)

MACURCO  DVP-120

Macurco DVP-120 control panel features 12 sensor inputs, three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,302.82 
(6823)

MACURCO  DVP-1200

Macurco DVP-1200 control panel for up to 192 addressable detectors. Includes 4 Relays (Up to 12), 3 4-20mA analog outputs, 4 24VDC drivers, 3 RS-485 channels and BACnet IP server output. NEMA4X enclosure. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. ETL Listed to UL 2017

Configure

$2,764.23 
(6227)

MACURCO  DVP-120B

Macurco DVP-120B Addressable Detection and Ventilation Panel with BACnet MS/TP output. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on two channels and 12 4-20mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,752.43 
(3973)

MACURCO  DVP-120M

Macurco DVP-120M Addressable Detection and Ventilation Panel. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on three channels of 29 sensors per channel. Features 12 4-20mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,444.88 
(7141)

HONEYWELL  FS24XP-ANGXX

Honeywell FS24X Plus IR3 Flame Detector for detection of hydrocarbon and hydrogen fires. Includes high visibility status LED, SM4 mount and multiple outpts: 4-20mA, relays, HART and Modbus. 24 VDC. ATEX, IECEx, cFMus (Class I, Div 1, Groups A,B,C,D), INMETRO, SIL2, FM3260 and EN54-10 Approvals. IP66 / IP67 (NEMA 4X).

Configure

$5,062.18 
(6770)

HONEYWELL  FSL100-UV

Honeywell FSL100-UV Flame Detector for robust, fast, and reliable detection of hydrocarbon or hydrogen fires in indoor/outdoor environments and potentially explosive atmospheres. Relay and mA outputs. GRP housing. EN54-10 and FM3260 approvals. IP65.

Configure

$2,433.66 
(4271)

BW  G0042-H25

BW Calibration Gas mixture for Hydrogen sulfide (H2S) 25 ppm, Balance Nitrogen, 58L aluminum cylinder. (requires REG-DF-1 or REG-0.5)



 
(6141)

FRESENIUS  GA220-BG

Fresenius GA220 BioGas, Landfill or Waste Water Analyzer for measurement of up tp 3 IR and 3 EC gases with NDIR and electrochemical technology, 19" rack mount. Includes 3 Hydrogen Sulfide (H2S) sensors 0-2000 ppm (used in sequence to triple sensor life), sequencer, 4 LPM internal sampling pump, sintered metal filter, pressure regulator 0.7-1.1 bar, touch panel display, 4 digital inputs, 6 digital outputs (relay) and RS232 interface. CE Approval.

Configure

$15,068.16 
(3416)

MACURCO  GD-12

MACURCO GD-12 line voltage Gas Detector, controller and transducer for Combustibles (EX) 0-50% LEL. Accepts Methane (NG-Natural Gas), Propane (LP-Liquid Propane) or Hydrogen (H2) detection. Selectable 4-20mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1, CSA Approved.

Configure

$494.01 
(1234)

MACURCO  GD-6

MACURCO GD-6 low voltage Gas Detector, Controller and Transducer for Combustibles 0-50% LEL. Accepts Methane (NG-Natural Gas), Propane (LP-Liquid Propane) or Hydrogen (H2) detection. Selectable 4-20mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1, CSA Approved.

Configure

$481.90 
(343)

GDS  GDS-48-1-71-06

GDS GDS-48 Remote Gas Detector Transmitter with Stainless steel sensor head configured with Catalytic Bead for Combustibles LEL (specify gas) with range 0-100% LEL (Lower Explosive Limit). 3-Wire Bridge Output. Available calibrated to Methane (Natural Gas), Ethane, Ethylene, Hydrogen, Butane, Pentane, IPA, Methanol, MEK, Propane, Propylene, Pentane and many others. CSA Certified for Div. 1 Explosion Proof.



 
(163)

GDS  GDS-49-1-14-08

GDS GDS-49 Remote Gas Detector Transmitter with Stainless steel sensor head configured for Hydrogen (H2) with range 0-1000 to 0-5000 ppm. 2-Wire 4-20 mA transmitter.



 
(164)

GDS  GDS-49-1-15-04

GDS GDS-49 Remote Gas Detector Transmitter with Stainless steel sensor head configured for Hydrogen Sulfide (H2S) with range 0-25 to 0-5000 ppm, Explosion Proof (XP). 2-Wire 4-20 mA transmitter.



 
(3348)

GDS  GDS-58DXP-0-110-06-15-04/0-0

GDS GDS-58DXP Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for GDS-IR Infrared Methane (Natural Gas) with range combustible 0-100% LEL (Lower Explosive Limit) and Hydrogen Sulfide (H2S). Brushless DC sample pump, Fault and Low Flow Warning. 24VDC. Includes high resolution LCD Display, two 4-20mA outputs and MODBUS serial slave port. Optional relays output. CSA and UL Approved for Hazardous Locations. Class I Div 1. Wide selection of hydrocarbons, alcohol, fuel and combustibles: Propane, Isobutane, Pentane, Butane, Ethanol, Methanol, Propylene, Ethylene, Exane, Jet-A, Diesel, Gasoline, Isopropyl Alchohol and others.

(3328)

GDS  GDS-58DXP-0-14-19-00-00/0-0

GDS GDS-58DXP Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Hydrogen (H2) with range 0-1% or 0-4% vol. Brushless DC sample pump, Fault and Low Flow Warning. 24VDC. Includes high resolution LCD Display, two 4-20mA outputs and MODBUS serial slave port. Optional relays output. CSA and UL Approved for Hazardous Locations. Class I Div 1.

(3329)

GDS  GDS-58DXP-0-15-04-00-00/0-0

GDS GDS-58DXP Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Hydrogen Sulfide (H2S) with range 0-25 to 0-5000 ppm. Brushless DC sample pump, Fault and Low Flow Warning. 24VDC. Includes high resolution LCD Display, two 4-20mA outputs and MODBUS serial slave port. Optional relays output. CSA and UL Approved for Hazardous Locations. Class I Div 1.

(3343)

GDS  GDS-58DXP-0-71-06-00-00/0-0

GDS GDS-58DXP Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Catalytic Bead sensor for Combustibles LEL (specify gas) with range 0-100% LEL (Lower Explosive Limit). Brushless DC sample pump, Fault and Low Flow Warning. 24VDC. Includes high resolution LCD Display, two 4-20mA outputs and MODBUS serial slave port. Optional relays output. CSA and UL Approved for Hazardous Locations. Class I Div 1. Available calibrated to Methane (Natural Gas), Ethane, Ethylene, Hydrogen, Butane, Pentane, IPA, Methanol, Ethanol, MEK, Propane, Propylene, Pentane and many others.

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | All


Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.