Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
MACURCO:    88 Items found.
(638)

MACURCO  CM-E1

Macurco CM-E1 Carbon Monoxide gas detector for residential and commercial office environment. Flush or surface mount options, alarm and trouble relays, and 85 dB buzzer. 9-32 VDC input. NFPA 720-2009 and UL 2075 listed. CSFM Approved.



$71.40 
(3616)

MACURCO  CM-E1 Harness

MACURCO CM-E1 Wire Harness with White Plug for CM-E1 Gas Detectors.



$7.00 
(2990)

MACURCO  CM-E1-FTG

Macurco CME1-FTG Carbon Monoxide (CO) 500 ppm field test gas to test Macurco fixed gas detectors (CM-6 and CM-E1). 11L, Aerosol, 1/cs.

Configure

$105.00 
(2992)

MACURCO  CME1-FTK

Macurco CME1-FTK Carbon Monoxide (CO) 200 ppm gas field test kit to test or calibrate Macurco fixed gas detectors (CM-E1 and CM-6). 17 Liter Steel Cylinder with CGA-600 male Inlet. Includes Carry Case, Regulator, Tubing and CM-E1 test hood. 1/cs. ... more



 
(3617)

MACURCO  CM-E1-IAK

MACURCO CM-E1-IAK Installation Adapter Kit used to retrofit Macurco-2 gang type installations (CM-15, CM-15A, CM-16A, etc) to CM-E1 single gang detectors.



$21.00 
(3618)

MACURCO  CM-E1-IAK/10

MACURCO CM-E1-IAK Installation Adapter Kit (10 Pack) used to retrofit Macurco-2 gang type installations (CM-15, CM-15A, CM-16A, etc) to CM-E1 single gang detectors.



$148.57 
(644)

MACURCO  CME-FCK

Macurco CME-FCK carbon monoxide field calibration kit is used to test or calibrate Macurco fixed gas detectors requiring two point calibration (CM-3 and CS102A) or single point calibration (CM-4, CM-2B, CM-21A, CM-1B and SS102HC). ****** DISCONTINUED****



 
(645)

MACURCO  CMS-FCK

Macurco CMS-FCK carbon monoxide field calibration kit is used to test or calibrate Macurco fixed gas detectors requiring single point calibration (CM-4, CM-2B, CM-21A, CM-1B and SS102HC) . Includes 17-liter 50 PPM CO, regulator, tubing and case. ***** REPLACED ... more



 
(3621)

MACURCO  CO-200PPM

MACURCO CANN200 ppm Carbon Monoxide (CO) Calibration Gas. 17 Liter Steel Cylinder with CGA-600 male Inlet. 200 ppm. Balance Air.



$109.34 
(3620)

MACURCO  CO50PPM

MACURCO CANN50 ppm Carbon Monoxide (CO) Calibration Gas. 17 Liter Steel Cylinder with CGA-600 male Inlet. 50 ppm. Balance Air.



$109.34 
(639)

MACURCO  CS102A

Macurco CS102A carbon monoxide transducer features an electrochemical sensor, status LED, 12-24 VAC or VDC operation and 1-3VDC output (0-250ppm). For use with the MACURCO SS103 Controllers and HVAC/Building Automation Systems *********** DISCONTINUED ********* Replaced by CM-6



 
(2117)

MACURCO  CX/TX-CH

MACURCO Calibration Hood/cup for CX, TX, OX, & RD series gas detectors: ammonia (NH3), hydrogen sulfide (H2S) and Nitrogen Dioxide (NO2).



$37.00 
(7311)

MACURCO  CX-12-CO

Macurco CX-12-CO low voltage Gas Detector, Controller and Transducer for Carbon Monoxide (CO) 0-200 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC. power ETL Listed to ... more

Configure

$442.29 
(3417)

MACURCO  CX-12-NO2

MACURCO CX-12-NO2 line voltage Gas Detector, controller and transducer for Nitrogen Dioxide (NO2) 0-20ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1. (Replaces TX-12-ND)

Configure

$550.62 
(6822)

MACURCO  CX-6

Macurco CX-6/CX-12 Fixed Gas Detector for low level detection of Carbon Monoxide (CO) 0-200ppm and Nitrogen Dioxide (NO2) 0-20 ppm. 4-20 mA output, 5A Fan Relay and 0.5A Alarm Relay. 12 to 24 VAC, 12 to 32 VDC or 100-240 ... more

Configure

$830.76 
(7310)

MACURCO  CX-6-CO

Macurco CX-6-CO low voltage Gas Detector, Controller and Transducer for Carbon Monoxide (CO) 0-200 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC. power ETL Listed to ... more

Configure

$380.19 
(2046)

MACURCO  CX-6-NO2

Macurco CX-6-NO2 low voltage Gas Detector, Controller and Transducer for Nitrogen Dioxide (NO2) 0-20 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC. power ETL Listed to ... more

Configure

$507.15 
(643)

MACURCO  DMK-1

Macurco DMK-1 Duct Mount Kit provides a means to duct mount standard 4 x 4 Macurco fixed gas detectors (single gang type need mud-ring). The DMK-1 features an air tight enclosure, clear cover that allows view of detector status lights, ... more



$202.51 
(640)

MACURCO  DVP-120

Macurco DVP-120 control panel features 12 4-20 mA sensor inputs, 3 x 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, ... more



 
(6823)

MACURCO  DVP-1200

Macurco DVP-1200 Addressable Gas detector controller alarm panel for up to 192 detectors. Includes 4 Relays (Up to 12), 3 x 4-20 mA analog outputs for VFD control, 4 x 24VDC output drivers, 3 RS-485 channels and BACnet IP server ... more

Configure

$2,670.30 
Page: 1 | 2 | 3 | 4 | 5 | All
MIRAMAR AUTOMATION LLC       
....
AI Automation Services


Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.