Intec I-m308wv | Carbon Dioxide | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

INTEC   I-M308WV

SKU# (2955)



INTEC I-M308WV

DETECTORS / GAS DETECTORS (GENERAL-PURPOSE)
CARBON DIOXIDE

$166.68  [In Stock]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Intec Controls I-M308 Infrared (NDIR) Gas Transmitter for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-(5)10 V) or current (4-20 mA) output signal. Wall or Duct mounted. Tri-color LED (normal/warning/alarm) and 24 VAC/VDC powered.

I-M308WV   
166.68

Options
Gas Range

[  In Stock  ]
4 Variants of base SKU
APPLICATION

To economically sense the concentration of Carbon Dioxide (CO 2 ) in air for a wide variety of commercial applications, such as demand-controlled ventilation in buildings, schools, theaters, etc., and transmit to any compatible electronic analog controller, DDC/PLC control or automation system in accordance with ASHRAE standards.

FEATURES
  • Non-dispersive infrared (NDIR) sensing technology
  • 0-2,000 or 0-5,000 ppm CO 2 (other ranges on request)
  • 0-(5)10 VDC or 4-20 mA output
  • Tri-color LED (normal/warning/alarm)
  • Highly efficient 24 VAC/VDC powered
  • Executive-style room housing; mounts to wall or standard 2x4 electrical box
  • Convenient screw terminal connections
  • Simple one-button, single-point calibration
  • 5-year calibration interval

Specifications
Electrical
Power supply 18-28 VAC, 18-30 VDC
Power consumption Voltage out: 0.75 VA avg, 2 VA peak
Current out: 1.4 VA avg, 4 VA peak
Sensor Performance
Gas detected Carbon Dioxide (CO2)
Sensor element Non-dispersive infrared (NDIR)
Gas sampling method Diffusion
Range 0-2000 ppm CO2
0-5000 ppm CO2
Accuracy ± 30 ppm, plus 2% of reading
Repeatability ± 20 ppm
Response time 3 min. (typical)
Altitude dependence Calibrated for sea level, adjustable to altering altitude levels by performing one gas auto calibration
Calibration Adjustment: Span only, zero adjustment automatically self-tuned
Time: 2-3 minutes, typical
Re-cal interval: (5) Five years
Sensor life expectancy 10 years, normal service
Type of Control
General Continuous proportional analog sensor signal output
Analog output Voltage: 0-(5)10 VDC
Current: 4-20 mA, R LOOP < 600 
Warm-up time Less than 1 minute
LED Display
Green < 1000 ppm
Yellow > 1000 ppm
Red > 2000 ppm
Environmental
Temperature 50°F to 122°F (10°C to 50°C)
Humidity 0 to 95% RH, non-condensing
Physical
Enclosure
Material High impact plastic, ABS, UL 94 V0
Color White
Cover Snap-on, w/ locking screw for 3/32" Allen wrench
Dimensions (H x W x D) Wall: 4.5 x 2.8 x 0.9 in. (114 x 72 x 24 mm)
Duct: 4.7 x 2.8 x 0.9 in. (120 x 72 x 24 mm) Probe 6.3 in. (161 mm)
Wire connection (4) Four screw terminals
Wire size 22-16 AWG
Weight Wall: 0.25 lb (0.11 kg)
Duct: 0.44 lb (0.19 kg)
Installation (wall) Surface mount or junction box, 4 to 6 feet above floor (1.2 to 1.8 m)
Warranty 1 year material and workmanship

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    1 Items found.
RAD-0102-6
(7048)

CO2METER  RAD-0102-6

CO2Meter RAD-0102-6 Remote "CO2 Storage Safety 3" gas leak detector with local and remote displays for Carbon Dioxide (CO2) 0-5% (0-50,000 ppm) with NDIR sensor. Includes audible and visual alarms, 3 alarm relays, 4-20 mA output and LCD display. IP54 Enclosure. UL Listed, meets NFPA, IFC, and NBIC requirements, OSHA and NIOSH TWA standards. Alarms 5,000 TWA, 1.5% (user configurable), 3% (user configurable), sensor life > 15 years, 12-24VDC power, includes 110-220VAC multi-region power adapter.

Configure

$672.00 
> CARBON DIOXIDE :    26 Items found.
I-M350WV-R000
(2956)

INTEC  I-M350WV-R000

Intec Controls I-M350 Infrared (NDIR) Gas Transmitter and Control System for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-10 V) or current (4-20 mA) output signal. Wall or Duct mounted. Tri-color LED (normal/warning/alarm). Optional relay/ouput control, audible alarm, LCD Display and relative humidity measurement.

Configure

$191.88 
SAN-10
(7050)

CO2METER  SAN-10

CO2Meter SAN-10 Personal Safety Monitor for Carbon Dioxide (CO2) 0-5% with NDIR sensor. Visual strobe light, audible and vibrating alarmas. Includes rechargeable Li-Ion battery, 110/240 VAC USB Wall Adapter and LCD Display. IP54 rubber enclosure.



$383.04 
CD-6MC
(4482)

MACURCO  CD-6MC

MACURCO CD-6 low voltage Carbon Dioxide (CO2) 0-5000ppm Gas Detector, controller and transducer. Selectable 4-20mA output, buzzer, alarm and fan relays and digital display options. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$495.09 
CD-6G
(6828)

MACURCO  CD-6G

MACURCO CD-6G / CD-6B Greenhouse Carbon Dioxide (CO2) 0-5% vol Gas Detector, controller and transducer. Selectable 4-20mA output, buzzer, alarm and fan relays and digital display options. 12 to 24 VAC or 12 to 32 VDC power. Auto or Manual Calibration (Relays, 4-20mA output). ETL Listed to UL 61010-1.

Configure

$495.09 
CD-12MC
(4494)

MACURCO  CD-12MC

MACURCO CD-12 line voltage Gas Detector, controller and transducer for Carbon Dioxide (CO2) 0-5000ppm. Selectable 4-20mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1.

Configure

$515.08 
364-510-01
(6148)

DELPHIAN  364-510-01

Delphian GazTell Fixed Point Infrared Gas Detector for Carbon Dioxide (CO2) 0.02% to 4.5% vol. 4-20mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
P-7133
(6786)

PROSENSE  P-7133

Prosense P-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with range 0-5000ppm or 0-5% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$823.68 
PQN-7133-1/2
(6959)

PROSENSE  PQN-7133-1/2

Prosense PQN-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,003.86 
PQD-7133-1/2
(6747)

PROSENSE  PQD-7133-1/2

Prosense PQD-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

$1,158.30 
1400ALD-101032/015P-L0
(6906)

RC SYSTEMS  1400ALD-101032/015P-L0

RC Systems SenSmart 1400 gas detector for Carbon Dioxide (C02) 0-1.5% or 0-5% with 'ST-48' smart transmitter. IR sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,432.47 
100-0008-SS/100-0015-CO2
(4752)

ESP SAFETY  100-0008-SS/100-0015-CO2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Carbon Dioxide (CO2) 0-2% vol, 0-5% vol or 0-3000ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. Optional 2nd sensor available.

Configure

$1,440.00 
GG-CO2-1
(2964)

CALIBRATION TECHNOLOGIES  GG-CO2-1

CTI GasGuard CO2 Carbon Dioxide Infrared Sensor (0-1%, 0-3% and 0-5%) for gas leak detection in wineries, food processing areas, bottling plants and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,519.00 
CM-900
(7201)

CO2METER  CM-900

CO2Meter CM-900 Industrial Gas Detector with NDIR (Infrared) sensor for Carbon Dioxide (CO2) 0-50,000ppm for Harsh Environments. Includes 3 configurable alarms, 3 dry contact relays, 4-20mA output and backup battery. 9-32VDC. Aluminum enclosure. IP64.

Configure

$1,535.04 
SPXCDULNB1
(661)

HONEYWELL  SPXCDULNB1

Honeywell XCD Sensepoint Gas Detector, Carbon Dioxide (CO2) Infrared Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for carbon dioxide (CO2) 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 2%Vol. only UL/CSA Class I Division 1 or ATEX (Zone 1) IECEx available.

Configure

$1,731.84 
54001AL-0-9053/005P/L0
(7119)

RC SYSTEMS  54001AL-0-9053/005P/L0

RC Systems SenSmart 5400 3-wire gas detector for Carbon Dioxide (CO2) 0-1.5% or 0-5% with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$1,809.09 
IR-F9-CO2-1-COM
(1547)

HONEYWELL  IR-F9-CO2-1-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Carbon Dioxide (CO2) with 4-20 mA output, 24VDC Power, NEMA-1 enclosure.

Configure

$2,001.73 
967-425520-100
(6068)

DETCON  967-425520-100

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 10-100%. Includes LED display, 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

 
34001AL-0-9053/005P/L0
(6897)

RC SYSTEMS  34001AL-0-9053/005P/L0

RC Systems SenSmart 3400 3 wire gas detector for Carbon Dioxide (CO2) 0-1.5% or 0-5% with 'ST-48' smart transmitter with infrared (IR) sensor. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$2,181.82 
967-405520-005
(6067)

DETCON  967-405520-005

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 0-5%. Includes LED display, 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

 
GDS-IR-1-132-0
(437)

GDS  GDS-IR-1-132-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Carbon Dioxide (CO2) with range 0-3.5%, 0-5% v/v, 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL-2 Rated.

Configure

 
Page: 1 | 2 | All
() Reviews | Write One      
....

I-M308WV     $167
INTEC / Detectors
Gas Detectors (general-purpose) / Carbon Dioxide
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.