Autronica 116-014048-232 | Lel Infrared | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

AUTRONICA   116-014048-232

SKU# (7230)
AUTRONICA 116-014048-232

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
LEL INFRARED

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Autronica AutroPoint HC200 Infrared IR Hydrocarbon Gas Detector calibrated to methane, propane, ethylene, or butane 0 to 100% LEL. Explosion-proof stainless steel housing. 4-20 mA signal with HART communication. MODBUS and ASCII supported. SIL2, FM/CSA, DEMKO, IECEx and ATEX certified for use in Class I, Div 1 and Div 2, and Zone 1 and Zone 2.

4-20 mA   FM   ATEX   IECEX   CSA   UL   DIV 1   DIV 2   ZONE 1   ZONE 2   SIL2   HART   MODBUS

Please Email us your request for quote   

  [  24 Weeks  ]
Features
  • Superior optics protection system
  • No undisclosed failure modes
  • SIL 2 model certified to IEC 61508 by exida®
  • Routine calibration not required
  • Explosion-proof, stainless steel housing with tethered weather protection baffle
  • Integral wiring compartment eliminates need for external junction boxes
  • Built-in tri-color LED eliminates need for external display module
  • Built-in optional relay package eliminates need for external relay output module
  • Non-interfering HART communication capability
  • Optional Intrinsically Safe HART communication port
  • Optional hand-held HART communicator enables field configuration and calibration
  • Optional model AV20 Universal Display for remote calibration
  • Heated sapphire optics deliver long-lasting, high performance detection capability
  • Immune to damage from exposure to constant background gases or to high gas concentrations
  • FM, CSA, DNV/MED, DEMKO and CE (including ATEX 94/9/EC) certifications
  • Certified to FM/CSA Div. 1 and DEMKO Ex d, e protection standards for maximum versatility.
  • Gas performance verification by FM/CSA/DEMKO.
  • Certified factory set and calibrated to methane, propane, ethylene, or butane
  • Faster response output option available
Application/Description

The AutroPoint HC200 is a diffusion-based, infrared combustible gas detector that provides continuous, fixed monitoring of flammable hydrocarbon gases from 0 to 100% Lower Flammable Limit (LFL).

Standard device outputs include an electrically isolated 4-20 mA signal with HART communication protocol, and RS-485 serial communication.

Serial communication protocols supported include MODBUS and ASCII. An optional relay output board with two programmable alarm relay outputs and one fault relay output is available.

An optional AutroVu Explosion-Proof Universal Display Unit Model AV20 can be used for remote calibration.

Ideally suited for protection of challenging on/offshore oil and gas facilities and other downstream hydrocarbon applications, the HC200 is globally certified for use in Class I, Divisions 1 and 2, and Zones 1 and 2 hazardous areas. In addition, the stainless steel construction, sapphire optics, and modular design all combine to deliver industrial grade hardness along with easy installation and the lowest cost of ownership available.

The AutroPoint HC200 is capable of detecting hundreds of flammable hydrocarbon gases and vapors. The detector is performance certified to methane, propane, ethylene, and butane, and is shipped from the factory set and calibrated to one of these gases. Numerous additional operating parameters are programmable via digital communication or the optional hand-held communicator.

For details regarding versions and article numbers, please contact our sales department or see our product catalogue.

Specifications
Input Voltage24 Vdc nominal. Operating range is 18 to 32 Vdc.
Ripple cannot exceed 0.5 volt P-P.
Power Consumption4.0 watts nominal @ 24 Vdc
7.5 watts maximum @ 24 Vdc
10 watts maximum @ 32 Vdc.
Short Circuit CurrentIsc: 5.4 amperes.
Isc (fuse): 3.1 amperes.
Power Supply Max Voltage: Um = 250V.
Warmup TimeTwo minutes from cold power-up to normal mode; 1 hour minimum recommended.
Current Output Relays (opt.)Linear 4-20 mA (current source/sink, isolated/ non-isolated) rated at 600 ohms maximum loop resistance @ 24 Vdc operating voltage.
Temperature RangeOperating: –40°C to +75°C (–40°F to +167°F).
Storage: –55°C to +85°C (–67°F to +185°F).
Humidity0 to 99% R.H. (Company verified).
5 to 95% R.H. (FM/CSA/DEMKO verified).
Detection Range0 to 100% LFL standard.
Other ranges are configurable.
Detectable GasesMost flammable hydrocarbon vapors are detectable.
HC200 is performance certified to methane, propane, ethylene, and butane, and is shipped from the factory set and calibrated to one of these gases.
For detection of other gases, configuration using HART, MODBUS, and device calibration are required.
Device ConfigurationConfiguration parameters include tag number, measurement range, signal processing algorithm, alarm levels, and other selectable parameters.
Alarm Setpoint RangeLow Alarm: 5 to 60% LFL
High Alarm: 5 to 60% LFL.
Accuracy±3% from 0 to 50% LFL, ±5% from 51 to 100% LFL.
Self-Diagnostic TestAll critical tests performed once per second.
Detector Housing Material316 stainless steel (CF8M).
Conduit Entry OptionsTwo entries, 3/4 inch NPT or 25 mm.
Wiring TerminalsField wiring screw terminals are UL/CSA rated for up to 14 AWG wire, and are DIN/VDE rated for 2.5 mm2 wire.
Shipping Weight (Approximate)10.5 pounds (4.8 kg).
DimensionsL = 236 mm, W = 132 mm, H = 117 mm
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> LEL INFRARED :    35 Items found.
006300-012
(7250)

DET-TRONICS  006300-012

Det-tronics PIR9400 PointWatch Infrared Hydrocarbon Gas Detector for Methane 0-100% LEL. Diffusion based. 18-30 VDC. 4-20 mA output signal. Explosion proof. IP66. Suitable for Class I Div 1, Div 2, Zone 1 and Zone 2 hazardous areas.



 
SV-3003
(7374)

PROSENSE  SV-3003

Prosense SafeVader SV-3003 Fixed Gas Detector with Infrared sensor for Hydrocarbons (Methane, Propane, Butane, LPG, Pentane, Gasoline/Petrol Vapor, Propylene and other combustibles) with range 0-100% LEL. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$629.01 
P-3033
(6722)

PROSENSE  P-3033

Prosense P-XY35 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$833.84 
PXN-3033-1/2
(7317)

PROSENSE  PXN-3033-1/2

Prosense PXN-XY33 Gas Detector with Infrared sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Pentane, Propylene and other explosive Hidrocarbons) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$977.30 
PXN-7133-1/2
(7342)

PROSENSE  PXN-7133-1/2

Prosense PXN-7133 Gas Detector with Infrared sensor for Carbon Dioxide with range 0-5000ppm to 0-60% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,004.20 
PQN-3033-1/2
(6946)

PROSENSE  PQN-3033-1/2

Prosense PQN-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Marine Bureau Veritas Certification (MED), Alarm Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,075.93 
PXD-3033-1/2
(7316)

PROSENSE  PXD-3033-1/2

Prosense PXD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (LPG, Methane, Petrol/Gasoline Vapor, Butane, Propane, Pentane, Propylene and other explosive Hidrocarbons) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,129.73 
PQD-3033-1/2
(6719)

PROSENSE  PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Marine Bureau Veritas Certification (MED), Alarm Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,246.28 
1300ALD-109050/100P-L0
(6904)

RC SYSTEMS  1300ALD-109050/100P-L0

RC Systems SenSmart 1300 Infrared (IR) Gas Detector for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide 0-100% LEL or %Vol with 'ST-48' smart transmitter. Infrared (IR) sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,467.53 
100-0001-M11-SS-1-2-CH4
(4722)

ESP SAFETY  100-0001-M11-SS-1-2-CH4

ESP Safety SGOES Infrared Gas Detector for measurement of hydrocarbon gases, Acetone (C3H6O), Benzene (C6H6), Butadiene (C4H6), Butanol (C4H9OH), Butanone (C4H8O), Butyl Acetate (C6H12O2), Cyclohexane (C6H12), Cyclohexanone (C6H10O), Cyclopentane (C5H10), Diesel Oil, Diethylamine (C4H11N), Ethane (C2H6), Ethanol (C2H5OH), Ethyl Acetate (C4H8O2), Ethyl Oxide (C2H4O), Ethylene (C2H4), Gasoline (C8H18), Heptane (C7H16), Hexane (C6H14), Isobutylene (C4H8), Isopropanol (C3H8O), Kerosene, Methane (CH4), Methanol (CH3OH), Methyl Chloride (CH3CL), Methylene Chloride (CH2CL2), MTBE (C5H12O), Oil, Para xylene (C8H10), Pentane (C5H12), Petroleum, Propane (C3H8), Propanol (C3H7OH), Propylene (C3H6), Styrene (C8H8), Toluene (C7H8) or White Spirit 0-100% LEL and others. Factory calibrated at 0%, 20%, 50%, and 95% LEL. Analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 3 relays. Includes protective weather cover and mounting hardware. IP66. SIL2 Rated. FM, ABS, IECEx, CE and CSA, Class I Div 1 Approved. Stainless steel construction. T90 response time= < 5 seconds (methane).

Configure

$1,539.78 
100-0008-00-SS-2-2/100-0015-IR-CH4
(4756)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-IR-CH4

ESP Safety Vector 2-channel gas detector controller with smart Infrared IR Plug-In sensor included to detect Acetone (C3H6O), Benzene (C6H6), Butadiene (C4H6), Butanol (C4H9OH), Butanone (C4H8O), Butyl Acetate (C6H12O2), Cyclohexane (C6H12), Cyclohexanone (C6H10O), Cyclopentane (C5H10), Diesel Oil, Diethylamine (C4H11N), Ethane (C2H6), Ethanol (C2H5OH), Ethyl Acetate (C4H8O2), Ethyl Oxide (C2H4O), Ethylene (C2H4), Gasoline (C8H18), Heptane (C7H16), Hexane (C6H14), Isobutylene (C4H8), Isopropanol (C3H8O), Kerosene, Methane (CH4), Methanol (CH3OH), Methyl Chloride (CH3CL), Methylene Chloride (CH2CL2), MTBE (C5H12O), Oil, Para xylene (C8H10), Pentane (C5H12), Petroleum, Propane (C3H8), Propanol (C3H7OH), Propylene (C3H6), Styrene (C8H8), Toluene (C7H8) or White Spirit 0-100% LEL and others. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Div 1 certification. Optional 2nd sensor available.

Configure

$1,675.19 
SPXCDULNRX
(659)

HONEYWELL  SPXCDULNRX

Honeywell XCD Sensepoint Gas Detector, Methane (Natural Gas) (CH4) Infrared Sensor combustible 0-100% LEL (Lower Explosive Limit) with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66. 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay and 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 20%-100%. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,700.23 
53001AL-0-9050/100P/L0
(7136)

RC SYSTEMS  53001AL-0-9050/100P/L0

RC Systems SenSmart 5300 3-wire gas detector with infrared (IR) sensor for Hydrocarbons 0-100% LEL or %Vol for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide with GEN2 smart sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$1,844.15 
PIRECLA11A1BT2
(7027)

DET-TRONICS  PIRECLA11A1BT2

Det-tronics PointWatch Eclipse PIRECL Infrared Gas Detector for detection of Hydrocarbons (methane, propane, ethylene, butane) 0 to 100% LFL. Diffusion based. 4-20 mA signal with HART and RS-485 serial communication. Optional relay output. Explosion-proof and stainless steel housing. 24 Vdc. Certified for use in Class I, Div 1 and Div 2. FM, CSA, ATEX, IECEx, DNV/MED, and INMETRO certifications.

Configure

 
SPXCDULNPX
(660)

HONEYWELL  SPXCDULNPX

Honeywell XCD Sensepoint Gas Detector, Infrared Sensor for Propane (C3H8), Ethylene (C2H4), Butane (C4H10) & Pentane (C5H12) combustible 0-100% LEL (Lower Explosive Limit) with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66, 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay and 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 20%-100%. UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$2,180.14 
GM/BX-1-R0100/0
(7293)

GDS  GM/BX-1-R0100/0

GDS GASMAX BX Gas Detector for Hydrobarbons 0-100% LEL, GDS-IR Sensor, 3-wire. Includes 4-20mA analog output and optional 3X isolated 5A alarm relays and MODBUS interface. TFT backlit display. CSA Class I Div 1. Wide selection of hydrocarbons, alcohol, fuel and combustibles: Propane, Isobutane, Pentane, Butane, Ethanol, Methanol, Propylene, Ethylene, Exane, Jet-A, Diesel, Gasoline, Isopropyl Alchohol and others.

Configure

$2,215.00 
33001AL-0-9050/100P/L0
(6898)

RC SYSTEMS  33001AL-0-9050/100P/L0

RC Systems SenSmart 3300 3 wire gas detector with infrared (IR) sensor for Hydrocarbons 0-100% LEL or %Vol for Natural Gas/Methane (CH4), Ethane (C2H6), Propane (C3H8), Butane (C4H10), Pentane (C5H12), Hexane (C6H14), Ethanol, Ethylene, Ethylene Oxide, Propylene, Toluene, Vinyl Acetate, Nitrous Oxide with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$2,216.88 
967-215520-100A
(2133)

DETCON  967-215520-100A

Detcon IR-700-CH Infrared Smart Combustible Sensor Assembly. Designed to detect hydrocarbon gases 0-100% LEL. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water-Proof, Corrosion-Proof and Vibration-Proof. Optional aluminum or stainless steel junction box. Gases: Methane, Ethane, Propane, Butane, Pentane, Hexane, Ethylene, Gasoline Vapor, Diesel Fuel Vapor, Jet Fuel Vapor Optional Alarm Relays, HART.

Configure

 
2108N4100N
(1676)

HONEYWELL  2108N4100N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector LEL available for over 100 gas and vapour calibrations. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration (Methane, Natural Gas, Propane, etc.) combustible 0-100% LEL (Lower Explosive Limit) with dust barrier, weather housing, deluge/heat shade, configured as current source output, UL/INMETRO approved (Also available ATEX and CSA). Optional remote gassing cell.

Configure

$2,527.52 
2108N4000N
(3414)

HONEYWELL  2108N4000N

Honeywell Optima Plus advanced stainless steel Point Infrared Hydrocarbon Gas Detector LEL available for over 100 gas and vapour calibrations. 4-channel (dual compensated) optics-block, 3-Wire 4-20 mA source, optional HART. Hydrocarbon calibration (Methane, Natural Gas, Propane, etc.) combustible 0-100% LEL (Lower Explosive Limit) with dust barrier, weather housing, deluge/heat shade, configured as current source output, ATEX/IECEx approved (Also available UL/INMETRO and CSA). Optional remote gassing cell.

Configure

$2,527.52 
Page: 1 | 2 | All
MIRAMAR AUTOMATION LLC       
....

116-014048-232
AUTRONICA / Detectors
Gas Detectors (explosion-proof) / Lel Infrared
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.