Gds Rmii-00-00-00/02-70-06/1-0-1-0 | Lel Catalytic Bead | Gas Detectors (rapid Deployment) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

GDS   RMII-00-00-00/02-70-06/1-0-1-0

SKU# (3468)
GDS RMII-00-00-00/02-70-06/1-0-1-0

DETECTORS / GAS DETECTORS (RAPID DEPLOYMENT)
LEL CATALYTIC BEAD

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
GDS RigMAX Single Channel Gas Monitor with Integrated strobe and 99dB horn with Catalytic Bead for Methane with range 0-100% LEL (Lower Explosive Limit). Includes backlit display and 100 ft #18GA neoprene power cable. 24 VDC. Aluminium Housing and 4 point magnetic mount. CSA Certified for Class 1, Div 1, Groups B, C & D. Available calibrated to Methane (Natural Gas), Ethane, Ethylene, Hydrogen, Butane, Pentane, IPA, Methanol, MEK, Propane, Propylene, Pentane and many others. *** phased out ***

Inquiry

The RigMAX II is a single point, highly reliable and easily-deployed toxic or combustible gas monitor designed especially for onshore petrochemical monitoring applications.

Based on the GASMAX family of gas monitors widely used in onshore and offshore applications worldwide, the RigMAX II combines a gas monitor, local or remote sensor, warning strobe, horn sounder and 75 ft power cable into one convenient package.

Powered by 24VDC, the RigMAX II includes a magnetic mounting plate that makes installation a snap on any metal vertical surface. In addition, the plate is pre-drilled to support 1 1/2” pole mount U-bolt hardware or standard through-bolts.

Intuitive User Interface

The backlit LCD and highly visible LEDs display alarm status and real-time gas values or 30-minute trend data while an event log stores time-stamped calibration and alarm events for later review. An intuitive menu-driven operator interface (no blinking LEDs!) and built-in, text- prompted calibration procedure makes it easy to keep the RigMAX II operating at peak efficiency.

Flexibilty

The RigMAX II supports a wide range of toxic sensors, including Hydrogen Sulfide, Sulfur Dioxide, Hydrogen, Hydrogen Cyanide and many more, including an Hydrogen Sulfide sensor designed specifically for low humidity applications. The RigMAX II can also be configured for infrared or catalytic bead sensors to detect a wide range of combustibles. A selection of red, amber, blue or purple strobes are available for rapid recognition of any gas emergency, and the horn can be programmed to provide a range of unique warning tones.

The RigMAX II is a convenient and easy solution for toxic gas monitoring in rough field conditions where reliability and rapid installation are critically important.

FEATURES

  • Robust, highly reliable single-point monitor for Hydrogen Sulfide gas
  • Integrated warning strobe and 99 dB horn provide quick response
  • Local or remote sensor with optional high visibility stand
  • Four-point magnetic mount makes installation quick and easy
  • Easy-to-use prompted calibration for rapid setup and commissioning
  • Fault supervision circuitry detects failed or missing sensor element
  • Backlit display for better visibility at night or in low light conditions
  • Security software lock prevents tampering or resetting alarms
  • Automatic recognition of GDS Corp Smart Sensors
  • Built-in Event Log records alarms, power cycles and calibrations
  • Includes 100 ft #18GA neoprene power cable wth flying leads
  • Remote sensor includes jbox, cable glands and 10’ neoprene cable
  • Manufactured in USA

RIGMAX II SPECIFICATIONS
Power Input: +24VDC ± 10% at less than 10 watts
Display GASMAX II gas monitor with backlit 64 x 128 pixel LCD with 30-minute trend, bargraph and engineering units. Alarm LEDs show Alarm 1, Alarm 2 and Fault.
Sensor Input Local or remote toxic sensor for oxygen, carbon monoxide, chlorine, hydrogen, hydrogen sulfide (normal and low humidity), sulfur dioxide, ammonia and mercaptan.
Catalytic bead sensor for detection of combusible levels of hydrocarbons or hydrogen Photoionization detector (PID) for detection of benzene, toulene and other volatile organic compounds in low ppm levels.
Output Alarm 1 Ouput: High visibility 24V strobe in red, amber, blue or purple. Sixty to 80 flashes per minute; 10,000 hour strobe lamp; 1.9 joules / flash; 190,000 candlepower.
Alarm 2 Output: Horn sounder, 91-97 dB at 10 feet. Eight user selectable tones: horn, chime, siren, slow whoop, temporal, hi-lo and single stroke bell.
Temp -10°C to +50°C operating range
Housing Aluminum housing with epoxy paint standard; Optional #316 stainless steel housing (specify [SS] in part number)
Mounting Four-point magnetic mount designed for flat surface. Mounting plate drilled for 2” pole mount and standard through-bolts
Dimensions Local Sensor: Width 11” (280 mm), Height 18” (457 mm), Depth 5” (127 mm)
Shipping weight 9 pounds (3 kg)
Approvals GASMAX CSA Certified for Class I, Div 1, Grps B, C, D.
Optional Class 1 Div 2 rated strobes
Horn sounder not for use in hazardous areas
Warranty 2 years on electronics and one year on sensors

 Info/Quote Request
 Reseller & Volume Discounts

> ACCESSORIES - RELATED - CONSUMABLES :    5 Items found.
1200-0267
(3192)

GDS  1200-0267

GDS Gas Detector Calibration Gas Cylinder Methane (CH4) 50% LEL. Balance Air. 103DS Stainless Steel Cylinder.

Configure

 
1200-0768
(3191)

GDS  1200-0768

GDS Gas Detector Calibration Gas Cylinder Methane (CH4) 25% LEL. Balance Air. 103L Aluminium Cylinder.

Configure

 
10-9570-R06
(342)

GDS  10-9570-R06

Catalytic Smart LEL sensor configured for Methane with range combustible 0-100% LEL (Lower Explosive Limit).



 
1200-0587
(3124)

GDS  1200-0587

GDS Gas Detector Calibration Gas Kit Methane (CH4) 25% LEL. Balance Air. Kit includes a 103L Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
1200-0522
(3125)

GDS  1200-0522

GDS Gas Detector Calibration Gas Kit Methane (CH4) 50% LEL. Balance Air. Kit includes a 103DS Stainless Steel Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
> LEL CATALYTIC BEAD :    28 Items found.
965-525420-100
(5006)

DETCON  965-525420-100

Detcon MicroSafe FP-524D Smart gas detection Sensor designed to detect and monitor combustible gases with range 0-100% LEL using matched-pair catalytic bead sensor technology. Aluminum Junction Box. 4-20mA output. LED Display. Explosion Proof. IP66. CSA and ISA Approved for Class I, Division 1, Groups B, C, & D.

Configure

 
52001AL-0-9070/100P/L0
(7121)

RC SYSTEMS  52001AL-0-9070/100P/L0

RC Systems SenSmart 5200 3-wire gas detector with Catalytic Bead sensor for Hydrocarbons and Hydrogen (ammonia, butane, ethane, ethanol, hexane, hydrogen, Isopropyl alcohol, pentane, propane, propene, propylene) 0-100% LEL with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$1,594.80 
XNXUTAVNNCB1
(852)

HONEYWELL  XNXUTAVNNCB1

Honeywell XNX Universal Gas Detector Transmitter including MPD CATALYTIC BEAD sensor combustible 0-100% LEL (Lower Explosive Limit) Methane (Natural Gas). Backlit LCD Display, HART® over 4-20mA output,UL/CSA approved, 5 x 3/4"NPT entries and painted Aluminum. UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2, INMETRO

Configure

$1,728.46 
XCDRFDL
(3004)

HONEYWELL  XCDRFDL

Honeywell Sensepoint XCD RFD (Remote Flammable Detector) Kit. Includes transmitter with LM25, 3/4“NPT Entry, 705 sensor, and 3 wire junction box. Tri-colour backit display. Outputs include 2 programmable alarm relays, 1 programmable fault relay, 4-20mAoutput (sink or source selectable). Sensor can be mounted up to 30 metres (100 feet) from transmitter. cCSAus Certified for North America. Class 1, Div 1, Groups B, C, & D.

Configure

$1,734.98 
967-521520-100
(5005)

DETCON  967-521520-100

Detcon FP-700 non-intrusive Smart Sensor designed to detect and monitor combustible gases with range 0-100% LEL using catalytic bead sensor technology. Aluminum or Stainless Steel Junction Box. 4-20mA and Modbus RS-485 outputs. LED Display. Explosion Proof. IP66. CSA, ATEX, CE and SIL2 Approved.

Configure

 
966-524520-100
(6100)

DETCON  966-524520-100

Detcon FP-624D Combustible 0-100% LEL Smart Sensor with catalytic bead. Includes detector in stainless steel housing, base connector board, explosion proof enclosure, splashguard, 4-20 mA output, RS-485 serial communication and 3 alarm relays. IP66. CSA approval for Class I, Division 1, Groups C & D.

Configure

 
32001AL-0-9071/100P/L0
(6894)

RC SYSTEMS  32001AL-0-9071/100P/L0

RC Systems SenSmart 3200 3 wire gas detector with Catalytic Bead sensor for Hydrocarbons and Hydrogen (ammonia, butane, ethane, ethanol, hexane, hydrogen, Isopropyl alcohol, pentane, propane, propene, propylene) 0-100% LEL with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,967.53 
6200AL1-0-109070/100P
(7019)

RC SYSTEMS  6200AL1-0-109070/100P

RC Systems SenSmart 6200 3 wire Dual Channel Gas Detector for Hydrocarbons and Hydrogen Catalytic Bead sensor (acetylene, ammonia, butane, ethane, ethanol, hexane, hydrogen, isopropyl alcohol, methane, pentane, propane, propene or propylene) 0-100% LEL with 'ST-44' smart transmitter and GEN2 smart sensor. Includes Color TFT Display, 4-20mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class 1 Div 1 (Explosion-Proof). IP66.

Configure

$2,389.61 
Page: 1 | 2 | All
() Reviews | Write One      
....

RMII-00-00-00/02-7
GDS / Detectors
Gas Detectors (rapid Deployment) / Lel Catalytic Bead
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.