Gds Gmcx-01-11-06/00-00-00/0 | Carbon Monoxide | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

GDS   GMCX-01-11-06/00-00-00/0

SKU# (3285)
GDS GMCX-01-11-06/00-00-00/0

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
CARBON MONOXIDE

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
GDS GASMAX CX 3-Wire Gas Detector with local stainless steel sensor head configured for Carbon Monoxide (CO) with range 0-100 to 0-9999 ppm, QVGA color TFT display, 4-20 mA output transmitter, Ethernet Modbus TCP RJ-45 port with built-in web server. Optional Alarm Relay Board (4x 5A SPDT) and RS-485 Modbus RTU. CSA Certified for Class I, Div 1, Grps B, C, D.

Inquiry

Features

  • CSA Certified for Class I, Div 1 explosion-proof installations
  • Monitor any combination of toxic and combustible gases
  • High resolution color TFT display for easy recognition of alarm status
  • Supports both local and remote sensors for easy installation
  • Non-intrusive, prompted calibra- tion with programmable cal value
  • Dual independent 4-20mA analog outputs with 0-4mA pass-through
  • Standard Ethernet port with built- in web server for remote access
  • Power-up and post-calibration delays eliminate false alarms
  • Backlit display for better visibility in low light conditions
  • Optional 4x SPDT alarm relays and dual MODBUS serial ports
  • Graphic display shows values, units, trend graph, alarm levels
  • Security settings allow user to lock critical parameters
  • Auto-recognition of Smart Sensors uploads calibration data & more
  • Fault supervision circuitry detects failed sensor & transmits warning
  • Setup in hazardous area requires only simple magnetic wand
  • Manufactured in USA

The new GASMAX CX gas monitor from GDS Corp delivers quality, performance and advanced features for the most critical gas detection applications. Designed especially for situations where gas readings need to be transmitted in real time via a variety of communication options, the GASMAX CX includes dual 4-20mA outputs and built-in Ethernet port with MODBUS/TCP and web server. An optional output board incldues 4X alarm relays and dual serial MODBUS channels with data rates up to 115k bits per second.

Widest Variety of Available Sensors

Built-in dual channel electronics allow the GASMAX CX to support almost any combination of GDS Corp toxic, bridge or 4-20mA sensors. Channel 1 features a dedicated bridge input configuration for traditional direct catalytic bead sensors, and both channels support the new 10- 98xx digital output low-noise sensors. Built-in sensor monitoring circuitry detects sensor faults or warns of missing sensors.

Advanced User Interface

The highly visible full color TFT backlit display makes the GASMAX CX gas monitor extremely easy to read and operate, and magnetic switches arranged around the screen allow users to perform calibrations or change settings without opening the enclosure. Bright flashing yellow or red alarm screens give users the ability to instantly recognize alarm conditions and take appropriate action.

Reliable, Dependable, Certified

The GASMAX CX carries a full two-year warranty and is fully CSA certified for use in Class I Division 1 hazardous areas.

Power Input 10-30VDC at < 10 watts with relay board (all relays energized)
DisplayQVGA color TFT display with value, 30-minute trend and bargraph
Channel One InputDigital sensor, bridge-style direct sensor or 4-20mA analog input
Channel Two InputDigital sensor or 4-20mA analog input
Standard OutputDual 3-wire 4-20mA current source. Max loop R is 600 ohms @ 24VDC
Ethernet RJ-45 with built-in web page for remote acces
Optional OutputThree programmable relays plus dedicated FAULT relay
Dual programmable master / slave MODBUS RS-485 serial interfaces
EnvironmentalOperating range -40°C to +60°C
Sensors include sensor heater for low temperature operation
Relative humidity to 95% non-condensing with GDS-IR; to 85% non- condensing when using electrochemical sensors
HousingAluminum housing with epoxy paint standard; Optional #316 stainless steel housing (specify [SS] in part number)
DimensionsWidth 5.4” (137 mm), Height 8” (203 mm), Depth 5” (127 mm) Shipping weight 6.5 pounds (3 kg)
Approvals CSA Certified for Class I, Div 1, Grps B, C, D.
Warranty 2 years on electronics and one year on sensors
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts

> ACCESSORIES - RELATED - CONSUMABLES :    7 Items found.
10-0203
(259)

GDS  10-0203

GDS Sensor calibration cup for stainless steel / aluminum sensor heads



 
1200-0462
(3164)

GDS  1200-0462

GDS Gas Detector Calibration Gas Cylinder Carbon Monoxide (CO) 100ppm. Balance Air. 103DS Stainless Steel Cylinder.

Configure

 
1200-0542
(3163)

GDS  1200-0542

GDS Gas Detector Calibration Gas Cylinder Carbon Monoxide (CO) 300ppm. Balance Air. 103DS Stainless Steel Cylinder.

Configure

 
10-9811-R06
(3351)

GDS  10-9811-R06

Electrochemical Smart Sensor configured for Carbon Monoxide (CO) with range 0-100/0-9999 ppm. For GDS GASMAX CX, GDS-58NXP, GDS-68XP, GDS-78XP.

Configure

 
1200-0505
(3094)

GDS  1200-0505

GDS Gas Detector Calibration Gas Kit Carbon Monoxide (CO) 300 ppm. Balance Air. Kit includes a 103DS Stainless Steel Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
1200-0459
(3092)

GDS  1200-0459

GDS Gas Detector Calibration Gas Kit Carbon Monoxide (CO) 100 ppm. Balance Air. Kit includes a 103DS Stainless Steel Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
90-50
(1642)

RC SYSTEMS  90-50

RC Systems ViewSmart 400 4-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 4 x 3-wire bridge or 4 x 4-20mA input channels board.

Configure

$3,525.97 
> CARBON MONOXIDE :    37 Items found.
OI-6000-EC-CO-X-X-O
(6835)

OTIS  OI-6000-EC-CO-X-X-O

Otis Instruments OI-6000 Gas Leak Detector with electrochemical sensor for Carbon Monoxide (CO) 0-1000ppm. Explosion Proof Wired power (3-Wire). (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs. 3 Push-Button Interface. IP 66/67. Optional alarm relays and Radio. CSA Approved for Class I Div 1. ATEX Zone 1 and IECEx Certified.

Configure

 
GG-CO-200
(2963)

CALIBRATION TECHNOLOGIES  GG-CO-200

CTI GasGuard CO Carbon Monoxide Electrochemical Sensor (0-200 ppm) for gas leak detection in food processing areas, warehousestank rooms and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,088.34 
2106B1405
(1453)

HONEYWELL  2106B1405

Honeywell Sieger Sensepoint Gas Detector Transmitter for Carbon Monoxide (CO) (0-100 to 0-500) ppm with Surecell Toxic Sensor. 2 wire 4-20mA loop output. ATEX/IECEx CSA Class I Division 2 Certified.

Configure

$1,135.98 
1100ALD-109011/0100P-L0
(6909)

RC SYSTEMS  1100ALD-109011/0100P-L0

RC Systems SenSmart 1100 gas detector for Carbon Monoxide (CO) 0-100ppm to 0-5000ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,314.28 
GG-CO-200-EXP
(5976)

CALIBRATION TECHNOLOGIES  GG-CO-200-EXP

CTI GG-CO-EXP Explosion Proof Electrochemical Gas Sensor for Carbon Monoxide (CO) 0-200 ppm. 4-20 mA output, 24VDC power supply. Explosion Proof Copper-free aluminum enclosure for Class l, Div 1 & 2, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved.

Configure

$1,341.51 
SPXCDULNCX
(664)

HONEYWELL  SPXCDULNCX

Honeywell XCD Sensepoint Gas Detector, Carbon Monoxide (CO) Electrochemical Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for carbon monoxide (CO) gas hazards both indoors and outdoors. 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 100 to 1,000ppm. UL/CSA Class I Division 1 or ATEX (Zone 1) IECEx available.

Configure

$1,442.71 
100-0008-SS/100-0015-CO
(4751)

ESP SAFETY  100-0008-SS/100-0015-CO

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Carbon Monoxide (CO) 0-100, 0-500 or 0-1000ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. Optional 2nd sensor available.

Configure

$1,481.40 
S3KUL2-XNXXSC1SS
(686)

HONEYWELL  S3KUL2-XNXXSC1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring CARBON MONOXIDE (CO) with electrochemical sensor, 2-wire 4-20mA loop, LCD Display, 0-300ppm, user adjustable (100 to 999ppm, 100ppm increments) Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$1,497.56 
41001AL-0-1011/0050P/L0
(7159)

RC SYSTEMS  41001AL-0-1011/0050P/L0

RC Systems SenSmart 4100 2-wire 4-20mA loop powered gas detector for Carbon Monoxide (CO) 0-50 to 0-5000ppm with GEN 2 smart Electrochemical sensor. Includes LCD Display. 10-30 VDC, Two flashing Alarm LEDs. Aluminum, Stainless Steel or non-metallic enclosure. CSA certified for Class 1 Div 1 & 2 (Explosion Proof).

Configure

$1,538.96 
961-440026-100G
(2131)

DETCON  961-440026-100G

Detcon DM-100-CO Electrochemical Carbon Monoxide (CO) 0-100ppm SensorAssembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. Optional 316 Stainless Steel Housing. 3/4" NPT thread. XP-instrinsically safe. Class I, Div. 1, Groups A, B, C, & D.

Configure

 
51001AL-0-1011/0050P/L0
(7124)

RC SYSTEMS  51001AL-0-1011/0050P/L0

RC Systems SenSmart 5100 3-wire gas detector for Carbon Monoxide (CO) 0-50 to 0-5000ppm with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$1,594.80 
967-444490-0100
(6074)

DETCON  967-444490-0100

Detcon DM-700-CO Electrochemical Smart Carbon Monoxide (CO) 0-100 ppm/0-200 ppm Sensor Assembly with LED display. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

 
SPXCDULNC2
(5096)

HONEYWELL  SPXCDULNC2

Honeywell Sensepoint XCD RTD Gas Detector for Carbon Monoxide (CO) with Electrochemical Sensor. Aluminium alloy LM25 or 316 stainless steel housing, PPS sensor head, tri-color backlit LCD Display. IP67. 3-wire 24 VDC power. Includes 3 programmable alarm relays and 4-20mA output (sink or source selectable), Modbus RTU option available. User-Selectable full scale range 0 to 200 ppm. UL/cCSAus Approved for Class I Div 2. Remote Sensor Option.

Configure

$1,735.82 
2100AL-0-9011/0100P/L0
(117)

RC SYSTEMS  2100AL-0-9011/0100P/L0

RC Systems SenSmart 2100 2 wire 4-20mA Loop Powered gas detector for Carbon Monoxide (CO) 0-100ppm to 0-5000ppm with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Stainless steel or aluminum enclosure. CSA certified for Class 1 Div 1 & 2 (Explosion Proof).

Configure

$1,789.61 
31001AL-0-9011/0100P/L0
(5780)

RC SYSTEMS  31001AL-0-9011/0100P/L0

RC Systems SenSmart 3100 3 wire gas detector for Carbon Monoxide (CO) 0-100ppm to 0-1000ppm with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,967.53 
XNXUTAENNNNN-XNXXSC1SS
(836)

HONEYWELL  XNXUTAENNNNN-XNXXSC1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Carbon Monoxide (CO) 0-300ppm, user adjustable (100 to 999ppm, 100ppm increments) compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2

Configure

$1,969.63 
6100AL1-0-1011/0050P
(7002)

RC SYSTEMS  6100AL1-0-1011/0050P

RC Systems SenSmart 6100 3 wire Dual Channel Gas Detector for Carbon Monoxide (CO) 0-50 to 0-5000ppm with 'ST-44' smart transmitter and GEN2 smart sensor. Includes Color TFT Display, 4-20mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class 1 Div 1 (Explosion-Proof). IP66.

Configure

$2,389.61 
Page: 1 | 2 | All
() Reviews | Write One      
....

GMCX-01-11-06/00-0
GDS / Detectors
Gas Detectors (explosion-proof) / Carbon Monoxide
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.