Features
Audible/visible notification appliances with
multi-tapped speaker and high intensity xenon
strobe
Xenon strobe visible notification appliance:
- UL listed to Standard 1971
- Models are available with 15, 30, or 110 candela
- 24 VDC operation with switch selection for free-run or synchronized flash rate
- Compatible with ADA requirements (refer to important installation information on page 3)
- Strobe candela rating is clearly indicated on reflector
- Wiring terminals are separate from audible notification appliance
- Impact resistant polycarbonate lens
Audible notification appliance (speaker):
- High quality voice and tone reproduction with taps for 1/4, 1/2, 1, or 2 W, at 25 or 70.7 VRMS
- Speakers are wired separately from strobe wiring
- UL listed to Standard 1480
- Compliant with NFPA 72, 520 Hz Low Frequency Signal Requirements for Sleeping Areas
Housing Options:
- Red with white lettering, for horizontal or vertical mounting
- White with red lettering, for horizontal mounting
Description
Speaker/Visible (S/V) notification appliances
combine a multi-tapped speaker and a high intensity
strobe to provide audio/tone notification and visible
notification from the same appliance.
Speakers and strobes are wired separately. The speaker is
multi-tapped with taps available for either 25 VRMS or
70.7 VRMS and the strobe is selectable for either free-run
or synchronized operation.
Strobe Selection. Proper selection of visible
notification is dependent on occupancy, location, local
codes, and proper applications of: the National Fire
Alarm Code (NFPA 72), ANSI A117.1, the appropriate
model building code, BOCA, ICBO, or SBCCI, and the
application guidelines of the Americans with Disabilities
Act (ADA).