Prosense Sv-8804 | Arsine | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

PROSENSE   SV-8804

SKU# (7396)
PROSENSE SV-8804
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Prosense SafeVader SV-8804 Fixed Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

4-20 mA   RELAYS   MODBUS

SV-8804
$1,205.60      

   3 Weeks  ]
Prosense SafeVader Series

Prosense SafeVader Series fixed gas detectors are designed to use in safe areas. It includes all common output functions.

SafeVader has special measurement functions especially Hydrogen and Refrigerant gas detection. Also lots of VOCs can be detected very quickly to provide safety in workplace.

Applications
  • Laboratories
  • Schools
  • Hospitals
  • Refrigerant Market
  • Hydrogen Detection
Features:
  • All-in-One: 4-20mA Analog, RS485 MODBUS RTU, and Relay outputs provided onboard o operate properly without any optional module.
  • Small and Smart: SafeVader has uniqe design and have all necessary functions for gas detection.
  • Accurate Readings: Infrared, Cathalytic and Electrochemical sensors undoubtedly provide an accurate and sensitive measurement.
  • Easy Maintenance: SafeVader Series detectors allow easy configuration with three buttons and user menu.
  • LCD Display: The LCD display is easily readable from any angle and user menu provides easy configuration.
  • Easy Calibration: Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.
  • Zero Suppression: Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.
  • Simple External Equipment Control: Onboard relay outputs enable you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.
  • Continuous Self-Test: The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.
  • Adjustable Parameters: All parameters can be easily changed according to the application requirements or facility standards.
  • Easy Status Recognition: Colored LEDs (green, yellow and red) provide additional alarm and status information.

Specifications
Sensing Element Electrochemical
Output Signal 4-20mA Analog | RS485 Modbus RTU | Relay Outputs
Sensor Warm-up Time 60 sec
Response Time (T90) <30 sec**
Accuracy %±1
Operating Temperature -20°C ~ +60°C (Sensor dependent)
Humidity 0~100% RH Non-Condensing
Input Voltage 12 to 28VDC (24VDC nominal)
Display 128x64 Graphic LCD with 3 LED status indicators
Relay Outputs 2 Alarms (Programmable) and 1 Fault (All relays set to NO)
Relay Rating 1.25A 30VDC
Cable Entry 2xPG9
IP Rating IP54
Enclosure Material ABS Plastic
Dimensions / Weight 130x73.30x59mm / 400g
Standards Compliance EMC
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    5 Items found.
S-DPX004
(7030)

PROSENSE  S-DPX004

Prosense S-DPX004 Gas Detector Controller, Alarm Panel for 4 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$806.95 
S-DPX008
(7032)

PROSENSE  S-DPX008

Prosense S-DPX008 Gas Detector Controller, Alarm Panel for 8 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$941.44 
S-DPX032
(7033)

PROSENSE  S-DPX032

Prosense S-DPX032 Gas Detector Controller, Alarm Panel for 32 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$1,075.93 
S-DPX064
(7034)

PROSENSE  S-DPX064

Prosense S-DPX064 Gas Detector Controller, Alarm Panel for 64 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$2,017.37 
S-DPX128
(7035)

PROSENSE  S-DPX128

Prosense S-DPX128 Gas Detector Controller, Alarm Panel for 128 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$3,496.78 
> ARSINE :    10 Items found.
M001-0092-000
(7053)

MPOWER  M001-0092-000

mPower UNI MP100 Portable Single Gas Detector for detection of Arsine (AsH3) 0-1ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.



$557.28 
P-8834
(6796)

PROSENSE  P-8834

Prosense P-8834 Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$1,425.61 
PXN-8834-1/2
(7366)

PROSENSE  PXN-8834-1/2

Prosense PXN-8834 Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,533.20 
961-190026-001C
(6350)

DETCON  961-190026-001C

Detcon DM-100-AsH3 Electrochemical Arsine (AsH3) 0-1ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. Optional 316 Stainless Steel Housing. 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, Groups A, B, C, & D. Optional Alarm Relays.

PXD-8834-1/2
(7365)

PROSENSE  PXD-8834-1/2

Prosense PXD-8834 Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,694.59 
PQN-8834-1/2
(6970)

PROSENSE  PQN-8834-1/2

Prosense PQN-8834 Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,694.59 
PQD-8834-1/2
(6757)

PROSENSE  PQD-8834-1/2

Prosense PQD-8834 Gas Detector with Electrochemical sensor for Arsine (AsH3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,864.95 
967-191990-001A
(6071)

DETCON  967-191990-001A

Detcon DM-700-AsH3 Electrochemical Smart Arsine (AsH3) 0-1 ppm Sensor Assembly with LED display. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

31001AL-0-9013/1P/L0
(5779)

RC SYSTEMS  31001AL-0-9013/1P/L0

RC Systems SenSmart 3100 3 wire gas detector for Arsine (AsH3) 0-1 ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

71001AL1900_-0-1016/0001P/L0-0000
(7415)

RC SYSTEMS  71001AL1900-0-1016/0001P/L0-0000

RC Systems SenSmart 7100 Wireless gas detector for Arsine (AsH3) 0-1 ppm with GEN 2 smart Electrochemical sensor, 900Mhz or 2.4Ghz. Includes LCD Display, Five flashing Alarm LEDs and D-cell lithium battery. Optional 10-30 VDC power board. Aluminum, Stainless Steel or non-metallic enclosure. CSA Certified for Class I, Division 1 (Explosion Proof) or Division 2 (Non-Incendive). Sensor head with splash guard

Configure

$3,733.76 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.