Prosense Sv-8604 | Silane | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

PROSENSE   SV-8604

SKU# (7394)
PROSENSE SV-8604

DETECTORS / GAS DETECTORS (GENERAL-PURPOSE)
SILANE

$812.46  [3 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Prosense SafeVader SV-8604 Fixed Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

4-20 mA   RELAYS   MODBUS

SV-8604
$812.46      

  [  3 Weeks  ]
Prosense SafeVader Series

Prosense SafeVader Series fixed gas detectors are designed to use in safe areas. It includes all common output functions.

SafeVader has special measurement functions especially Hydrogen and Refrigerant gas detection. Also lots of VOCs can be detected very quickly to provide safety in workplace.

Applications
  • Laboratories
  • Schools
  • Hospitals
  • Refrigerant Market
  • Hydrogen Detection
Features:
  • All-in-One: 4-20mA Analog, RS485 MODBUS RTU, and Relay outputs provided onboard o operate properly without any optional module.
  • Small and Smart: SafeVader has uniqe design and have all necessary functions for gas detection.
  • Accurate Readings: Infrared, Cathalytic and Electrochemical sensors undoubtedly provide an accurate and sensitive measurement.
  • Easy Maintenance: SafeVader Series detectors allow easy configuration with three buttons and user menu.
  • LCD Display: The LCD display is easily readable from any angle and user menu provides easy configuration.
  • Easy Calibration: Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.
  • Zero Suppression: Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.
  • Simple External Equipment Control: Onboard relay outputs enable you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.
  • Continuous Self-Test: The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.
  • Adjustable Parameters: All parameters can be easily changed according to the application requirements or facility standards.
  • Easy Status Recognition: Colored LEDs (green, yellow and red) provide additional alarm and status information.

Specifications
Sensing Element Electrochemical
Output Signal 4-20mA Analog | RS485 Modbus RTU | Relay Outputs
Sensor Warm-up Time 60 sec
Response Time (T90) <30 sec**
Accuracy %±1
Operating Temperature -20°C ~ +60°C (Sensor dependent)
Humidity 0~100% RH Non-Condensing
Input Voltage 12 to 28VDC (24VDC nominal)
Display 128x64 Graphic LCD with 3 LED status indicators
Relay Outputs 2 Alarms (Programmable) and 1 Fault (All relays set to NO)
Relay Rating 1.25A 30VDC
Cable Entry 2xPG9
IP Rating IP54
Enclosure Material ABS Plastic
Dimensions / Weight 130x73.30x59mm / 400g
Standards Compliance EMC
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    5 Items found.
S-DPX004
(7030)

PROSENSE  S-DPX004

Prosense S-DPX004 Gas Detector Controller, Alarm Panel for 4 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$806.95 
S-DPX008
(7032)

PROSENSE  S-DPX008

Prosense S-DPX008 Gas Detector Controller, Alarm Panel for 8 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$941.44 
S-DPX032
(7033)

PROSENSE  S-DPX032

Prosense S-DPX032 Gas Detector Controller, Alarm Panel for 32 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$1,075.93 
S-DPX064
(7034)

PROSENSE  S-DPX064

Prosense S-DPX064 Gas Detector Controller, Alarm Panel for 64 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$2,017.37 
S-DPX128
(7035)

PROSENSE  S-DPX128

Prosense S-DPX128 Gas Detector Controller, Alarm Panel for 128 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$3,496.78 
> SILANE :    8 Items found.
P-8634
(6794)

PROSENSE  P-8634

Prosense P-8634 Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$1,022.14 
PXN-8634-1/2
(7360)

PROSENSE  PXN-8634-1/2

Prosense PXN-8634 Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,156.62 
PQN-8634-1/2
(6968)

PROSENSE  PQN-8634-1/2

Prosense PQN-8634 Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,273.19 
PXD-8634-1/2
(7359)

PROSENSE  PXD-8634-1/2

Prosense PXD-8634 Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,309.05 
PQD-8634-1/2
(6755)

PROSENSE  PQD-8634-1/2

Prosense PQD-8634 Gas Detector with Electrochemical sensor for Silane (SiH4) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,443.54 
41001AL-0-1063/10P/L0
(7188)

RC SYSTEMS  41001AL-0-1063/10P/L0

RC Systems SenSmart 4100 2-wire 4-20 mA loop powered gas detector for Silane(SiH4) 0-10 ppm or 0-50 ppm with GEN 2 smart Electrochemical sensor. Includes LCD Display. 10-30 VDC, Two flashing Alarm LEDs. Aluminum, Stainless Steel or non-metallic enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$1,997.40 
51001AL-0-1063/10P/L0
(7189)

RC SYSTEMS  51001AL-0-1063/10P/L0

RC Systems SenSmart 5100 3-wire gas detector for Silane (SiH4) 0-10 ppm or 0-50 ppm with GEN 2 smart Electrochemical sensor. Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$2,053.24 
71001AL1900_-0-1036/0050P/L0-2189
(7411)

RC SYSTEMS  71001AL1900-0-1036/0050P/L0-2189

RC Systems SenSmart 7100 Wireless gas detector for Silane (SiH4) 0-50 ppm with GEN 2 smart Electrochemical sensor, 900Mhz or 2.4Ghz. Includes LCD Display, Five flashing Alarm LEDs and D-cell lithium battery. Optional 10-30 VDC power board. Aluminum, Stainless Steel or non-metallic enclosure. CSA Certified for Class I, Division 2 (Non-Incendive). Sensor head with splash guard

Configure

$3,807.79 
MIRAMAR AUTOMATION LLC       
....

SV-8604     $812
PROSENSE / Detectors
Gas Detectors (general-purpose) / Silane

GHG4341195R0004
MEDC / Alarm Signal Devices
Atex / Control Units

CO50PPM     $104
MACURCO / Calibration
Calibration Gas Macurco / Carbon Monoxide

497649
KWIKDRAW / Tubes
Short Term Gas Detector Tubes / Formaldehyde

XP10-M
NOTIFIER / Accessories & Parts
Accessories / Notifier
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.