Prosense Sv-8404 | Phosphine | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

PROSENSE   SV-8404

SKU# (7393)
PROSENSE SV-8404
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Prosense SafeVader SV-8404 Fixed Gas Detector with Electrochemical sensor for Phosphine (PH3) with range 0-10ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

4-20 mA   RELAYS   MODBUS

SV-8404
$786.26      

   3 Weeks  ]
Prosense SafeVader Series

Prosense SafeVader Series fixed gas detectors are designed to use in safe areas. It includes all common output functions.

SafeVader has special measurement functions especially Hydrogen and Refrigerant gas detection. Also lots of VOCs can be detected very quickly to provide safety in workplace.

Applications
  • Laboratories
  • Schools
  • Hospitals
  • Refrigerant Market
  • Hydrogen Detection
Features:
  • All-in-One: 4-20mA Analog, RS485 MODBUS RTU, and Relay outputs provided onboard o operate properly without any optional module.
  • Small and Smart: SafeVader has uniqe design and have all necessary functions for gas detection.
  • Accurate Readings: Infrared, Cathalytic and Electrochemical sensors undoubtedly provide an accurate and sensitive measurement.
  • Easy Maintenance: SafeVader Series detectors allow easy configuration with three buttons and user menu.
  • LCD Display: The LCD display is easily readable from any angle and user menu provides easy configuration.
  • Easy Calibration: Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.
  • Zero Suppression: Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.
  • Simple External Equipment Control: Onboard relay outputs enable you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.
  • Continuous Self-Test: The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.
  • Adjustable Parameters: All parameters can be easily changed according to the application requirements or facility standards.
  • Easy Status Recognition: Colored LEDs (green, yellow and red) provide additional alarm and status information.

Specifications
Sensing Element Electrochemical
Output Signal 4-20mA Analog | RS485 Modbus RTU | Relay Outputs
Sensor Warm-up Time 60 sec
Response Time (T90) <30 sec**
Accuracy %±1
Operating Temperature -20°C ~ +60°C (Sensor dependent)
Humidity 0~100% RH Non-Condensing
Input Voltage 12 to 28VDC (24VDC nominal)
Display 128x64 Graphic LCD with 3 LED status indicators
Relay Outputs 2 Alarms (Programmable) and 1 Fault (All relays set to NO)
Relay Rating 1.25A 30VDC
Cable Entry 2xPG9
IP Rating IP54
Enclosure Material ABS Plastic
Dimensions / Weight 130x73.30x59mm / 400g
Standards Compliance EMC
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    9 Items found.
ISC-1810-7805-EQUIV
(2596)

PORTAGAS  ISC-1810-7805-EQUIV

Calibration Gas Phosphine 5 ppm Balance Nitrogen 34 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID tag)

Configure

$245.89 
BW-CG2P534-EQUIV
(2196)

PORTAGAS  BW-CG2P534-EQUIV

Calibration Gas Phosphine 5 ppm Balance Nitrogen Size 34 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$245.89 
ISC-1810-7797-EQUIV
(2597)

PORTAGAS  ISC-1810-7797-EQUIV

Calibration Gas Phosphine 5 ppm Balance Nitrogen 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID tag)

Configure

$352.27 
HONEYWELL-GFV272-EQUIV
(2295)

PORTAGAS  HONEYWELL-GFV272-EQUIV

Calibration Gas Phosphine 5 ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$352.27 
S-DPX004
(7030)

PROSENSE  S-DPX004

Prosense S-DPX004 Gas Detector Controller, Alarm Panel for 4 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$806.95 
S-DPX008
(7032)

PROSENSE  S-DPX008

Prosense S-DPX008 Gas Detector Controller, Alarm Panel for 8 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$941.44 
S-DPX032
(7033)

PROSENSE  S-DPX032

Prosense S-DPX032 Gas Detector Controller, Alarm Panel for 32 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$1,075.93 
S-DPX064
(7034)

PROSENSE  S-DPX064

Prosense S-DPX064 Gas Detector Controller, Alarm Panel for 64 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$2,017.37 
S-DPX128
(7035)

PROSENSE  S-DPX128

Prosense S-DPX128 Gas Detector Controller, Alarm Panel for 128 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$3,496.78 
> PHOSPHINE :    12 Items found.
M001-0016-000
(6007)

MPOWER  M001-0016-000

mPower UNI MP100 Portable Single Gas Detector for detection of Phosphine (PH3) 0-20ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.



$342.28 
S1-P-Y
(6394)

BW  S1-P-Y

BW Solo Serviceable Single-gas Detector for Phosphine (PH3) 0-5 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

P-8434
(6793)

PROSENSE  P-8434

Prosense P-8434 Gas Detector with Electrochemical sensor for Phospine (PH3) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$995.23 
PXN-8434-1/2
(7358)

PROSENSE  PXN-8434-1/2

Prosense PXN-8434 Gas Detector with Electrochemical sensor for Phosphine (PH3) with range 0-10 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,129.73 
PQN-8434-1/2
(6967)

PROSENSE  PQN-8434-1/2

Prosense PQN-8434 Gas Detector with Electrochemical sensor for Phospine (PH3) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,246.28 
PXD-8434-1/2
(7357)

PROSENSE  PXD-8434-1/2

Prosense PXD-8434 Gas Detector with Electrochemical sensor for Phosphine (PH3) with range 0-10 ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$1,282.15 
PQD-8434-1/2
(6754)

PROSENSE  PQD-8434-1/2

Prosense PQD-8434 Gas Detector with Electrochemical sensor for Phospine (PH3) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,416.64 
961-200026-005C
(6374)

DETCON  961-200026-005C

Detcon DM-100-PH3 Electrochemical Phosphine (PH3) 0-5ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, Groups A, B, C, & D. Optional Alarm Relays.

31001AL-0-9073/10P/L1
(5788)

RC SYSTEMS  31001AL-0-9073/10P/L1

RC Systems SenSmart 3100 3 wire gas detector for Phosphine (PH3) 0-10 ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure with splash guard. CSA certified for Class I Div 1 (Explosion Proof).

S3KUL2-XNXXSP1SS
(698)

HONEYWELL  S3KUL2-XNXXSP1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring PHOSPHINE (PH3) with electrochemical sensor, 2-wire 4-20 mA loop, LCD Display, 0-1.2ppm Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$2,268.23 
967-192090-005A
(6098)

DETCON  967-192090-005A

Detcon DM-700-PH3 Electrochemical Smart Phosphine (PH3) 0-5 ppm Sensor Assembly with LED display. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

XNXUTAENNNNN-XNXXSP1SS
(850)

HONEYWELL  XNXUTAENNNNN-XNXXSP1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Phosphine (PH3) 0-1.2ppm compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20 mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class I, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2 . Optional Alarm Relays, Modbus, Fieldbus.

Configure

$2,763.21 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.