The RP-2001 is a six-zone FACP for single and dual hazard
deluge and preaction applications. The RP-2001 provides reliable fire detection, signaling and protection for commercial,
industrial and institutional buildings requiring water-based
releasing. The RP-2001 is compatible with System Sensor’s i3
detectors which are conventional smoke detectors that can
transmit a maintenance trouble signal to the FACP indicating
the need for cleaning and a supervisory ‘freeze’ signal when
the ambient temperature falls below the detector rating of
approximately 45°F (7.22°C). In addition, the control panel is
compatible with conventional input devices such as two-wire
smoke detectors, four-wire smoke detectors, pull stations,
waterflow devices, tamper switches and other normally-open
contact devices. Refer to the Notifier Device Compatibility
Document for a complete listing of compatible devices.
Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits. Three programmable
Form-C relays (factory programmed for Alarm, Trouble and
Supervisory) and 24 VDC special application resettable and
non-resettable power outputs are also included on the main
circuit board. The RP-2001 supervises all wiring, AC voltage,
battery charger and battery level.
Activation of a compatible smoke detector or any normally open fire alarm initiating device will activate audible and visual
signaling devices, illuminate an indicator, display alarm information on the panel’s LCD, sound the piezo sounder at the
FACP, activate the FACP alarm relay and operate an optional
module used to notify a remote station or initiate an auxiliary
control function.
The RP-2001E offers the same features as the RP-2001 but
allows connection to 240 VAC. Unless otherwise specified, the
information in this data sheet applies to both the 120 VAC and
240 VAC versions of the panels.
Features
- Listed to UL Standard 864, 9th edition.
- FM Approved.
- Designed for sprinkler standards NFPA 13, 15 and 16.
- Dual hazard operation.
- Adjustable waterflow discharge timer and two soak timers.
- Cross-zone (double-interlock) capability.
- Six programmable Style B (Class B) IDCs (Initiating Device Circuit).
- System Sensor i 3 series detectors compatible.
- Four programmable Style Y (Class B) output circuits - (special application power).
- Strobe Synchronization:
- System Sensor
- Wheelock
- Gentex
- Faraday
- Amseco
- Three programmable Form-C relays.
- 7.0 amps total 24 VDC output current.
- Resettable and non-resettable output power.
- Built-in Programmer.
- ANN-BUS for connection to optional devices (up to 8 total of any of the following):
- N-ANN-80 Remote LCD Annunciator
- N-ANN-I/O LED Driver
- N-ANN-S/PG Printer Module
- N-ANN-RLY Relay Module
- N-ANN-LED Annunciator Module
- 80-character LCD display (backlit).
- Real-time clock/calendar with daylight savings time control.
- History log with 256 event storage.
- Piezo sounder for alarm, trouble and supervisory.
- 24 volt DC operation.
- Low AC voltage sense.
- Outputs Programmable for:
- Releasing circuits or NACS
NACs programmable for:Silence InhibitAuto-SilenceStrobe SynchronizationSelective Silence (horn-strobe mute)Temporal or Steady SignalSilenceable or Non-silenceableRelease Stage Sounder
Disable/Enable control per input zone and output zone.
Extensive transient protection.
Automatic battery charger with charger supervision.
Optional Dress Panel DP-51050 (red).
Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet.
Optional N-CAC-5X Class A Converter Module for Outputs and IDCs.
Optional 4XTM Municipal Box Transmitter Module.
Optional Digital Alarm Communicators (411, 411UD,411UDAC).
Optional ANN-SEC card for a secondary ANN-BUS.
PROGRAMMING AND SOFTWARE:
- Custom English labels (per point) may be manually entered or selected from an internal library file.M
- Three programmable Form-C relay outputs.M
- Pre-programmed and custom application templates.M
- Continuous fire protection during online programming at the front panel.M
- Program Check automatically catches common errors not linked to any zone or input point.M
USER INTERFACE:
- Integral 80-character LCD display with backlighting.M
- Real-time clock/calendar with automatic daylight savings adjustments.M
- ANN-Bus for connection to remote annunciators.M
- Audible or silent walk test capabilities.M
- Piezo sounder for alarm, trouble, and supervisory.M
NFPA Standards
The RP-2001(E) complies with the following NFPA 72 Fire
Alarm Systems requirements:
- NFPA 13 Installation of Sprinkler Systems
- NFPA 15 Water Spray Fixed Systems
- NFPA 16 Deluge Foam-Water Sprinkler and Foam-Water Spray Systems
- NFPA 72 National Fire Alarm Code for Local Fire Alarm Systems and Remote Station Fire Alarm Systems (requires an optional Remote Station Output Module)
Agency Listings and Approvals
The listings and approvals below apply to the basic RP-2001(E) and RP-2001(E)E fire alarm control panels. In some
cases, certain modules may not be listed by certain approval
agencies, or listing may be in process. Consult factory for latest listing status.
- UL: S635
- FM approved
- CSFM: 7165-0028:0245
- MEA: 333-07-E