Rc Systems 1400ald-101032/015p-l0 | Carbon Dioxide | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

RC SYSTEMS   1400ALD-101032/015P-L0

SKU# (6906)



RC SYSTEMS 1400ALD-101032/015P-L0
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
RC Systems SenSmart 1400 gas detector for Carbon Dioxide (C02) 0-1.5% or 0-5% with 'ST-48' smart transmitter. IR sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

CSA   UL   DIV 1   BRIDGE

1400ALD-101032/015P-L0   
1,432.47

Gas
Enclosure Type
Splash Guard

   3 Weeks  ]
12 Variants of base SKU

The RC Systems SenSmart 1200 is a 3-Wire Bridge Gas Detector available in a 316 stainless steel sensor head enclosure and Suitable for Class 1 Division 1 Groups A, B, C, D. These easy-to-install and maintain gas detectors must be connected to an R. C. Systems single or multi-channel receiver to add user calibration and readout functions.

The SenSmart 1200 utilizes our “bridge” sensors, including catalytic, acetylene, ammonia, butane, ethane, ethanol, hexane, hydrogen, Isopropyl alcohol, methane, pentane, propane, propene, propylene and many other compounds. The 1200’s bridge output is compatible with R C Systems single and multi-channel receivers.

OEM Version of the GDS Corp. GDS-48

FEATURES HIGHLIGHT
  • Field swappable sensor module. Range and target gas configured on sensor module
  • Improves system noise immunity because low level sensor signals are protected within the sensor head
  • 316 SS sensor head model is Suitable for Class 1 Division 1 hazardous areas
  • Missing or failed sensor forces FAULT signal
  • Compatible with 1, 2, 4, 16 and 64 channel Receiver/Controllers (user calibration & readout are at the Receiver)

SPECIFICATIONS
Power Supply2VDC @ 300mA
Accuracy+/- 1% of full scale range (typical)
Standard Output3 wire bridge output
TempLess than .1% per degree C over ambient temperature range
Housing316 Stainless or aluminum enclosure suitable for Class 1 Groups A,B,C,D; Class 2, Groups E,F,G
ApprovalsSuitable for Class 1 Division 1 and Group A,B,C,D Exia.
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    9 Items found.
10-0203
(7043)

RC SYSTEMS  10-0203

RC SYSTEMS Sensor calibration cup adaptor for stainless steel / aluminum sensor heads



$95.71 
90302169
(1273)

PORTAGAS  90302169

Calibration Gas Carbon Dioxide (CO2) 1000 ppm Balance Air 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$124.51 
10046000
(876)

PORTAGAS  10046000

Calibration Gas Carbon Dioxide (CO2) 25000 ppm 2.5% Balance Nitrogen 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$124.51 
90092236
(875)

PORTAGAS  90092236

Calibration Gas Carbon Dioxide (CO2) 10000 ppm 1% Balance Nitrogen 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$124.51 
10-0552
(7028)

RC SYSTEMS  10-0552

Sample Draw Flow Cell Barrel Adapter for RC Systems Gen I and Gen II 10-0247 Sensor heads(Series 1000, 2000, 3000, 5000 and 6000) gas detectors) 1/8" NPT ports (1 inlet 1 outlet). Used with ST-44 and ST-48 Transmitters.



$213.06 
10-9053
(7103)

RC SYSTEMS  10-9053

RC Systems 10-9032/10-9053/10-9553 Gen I Infrared Smart Sensor assembly for Series 1000, 3000, 5000, 6000 Gas Detectors with ST-44 & ST-48 transmitter, Carbon Dioxide (CO2) IR 0-1.5% or 0-5% Volume

Configure

$779.22 
90-01
(3243)

RC SYSTEMS  90-01

RC Systems ViewSmart 200 2-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Div 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 2 x 3-wire bridge or 2 x 4-20 mA input channels board.

Configure

$2,820.78 
90-50
(1642)

RC SYSTEMS  90-50

RC Systems ViewSmart 400 4-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Div 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 4 x 3-wire bridge or 4 x 4-20 mA input channels board.

Configure

$3,525.97 
ST-72-02
(6921)

RC SYSTEMS  ST-72-02

RC Systems ViewSmart 6400 Digital Gas Detection CONTROLLER with 16, 32, 48 or 64 channels and LCD display of 320x240 pixels. Centralize display and alarm functions. UL and CSA approved for Class I, Div 2, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included. Standard SPDT 5A relays for HORN and FAULT, plus 3 programmable alarm relays included. NEMA 4X, NEMA 4X Stainless Steel, full 19" Rack mount and NEMA 7 wall-mount options. Optional 4-20 mA inputs.

Configure

$12,179.52 
> CARBON DIOXIDE :    26 Items found.
I-M308WV
(2955)

INTEC  I-M308WV

Intec Controls I-M308 Infrared (NDIR) Gas Transmitter for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-(5)10 V) or current (4-20 mA) output signal. Wall or Duct mounted. Tri-color LED (normal/warning/alarm) and 24 VAC/VDC powered.

Configure

$166.68 
I-M350WV-R000
(2956)

INTEC  I-M350WV-R000

Intec Controls I-M350 Infrared (NDIR) Gas Transmitter and Control System for Carbon Dioxide (CO2) 0-2000 or 0-5000 ppm. Voltage (0-10 V) or current (4-20 mA) output signal. Wall or Duct mounted. Tri-color LED (normal/warning/alarm). Optional relay/ouput control, audible alarm, LCD Display and relative humidity measurement.

Configure

$191.88 
CD-6G
(6828)

MACURCO  CD-6G

MACURCO CD-6G / CD-6B Greenhouse Carbon Dioxide (CO2) 0-5% vol Gas Detector, controller and transducer. Selectable 4-20 mA output, buzzer, alarm and fan relays and digital display options. 12 to 24 VAC or 12 to 32 VDC power. Auto or Manual Calibration (Relays, 4-20 mA output). ETL Listed to UL 61010-1.

Configure

$495.09 
CD-6MC
(4482)

MACURCO  CD-6MC

MACURCO CD-6 low voltage Carbon Dioxide (CO2) 0-5000ppm Gas Detector, controller and transducer. Selectable 4-20 mA output, buzzer, alarm and fan relays and digital display options. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$495.09 
CD-12MC
(4494)

MACURCO  CD-12MC

MACURCO CD-12 line voltage Gas Detector, controller and transducer for Carbon Dioxide (CO2) 0-5000ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1.

Configure

$515.08 
364-510-01
(6148)

DELPHIAN  364-510-01

Delphian GazTell Fixed Point Infrared Gas Detector for Carbon Dioxide (CO2) 0.02% to 4.5% vol. 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

P-7133
(6786)

PROSENSE  P-7133

Prosense P-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with range 0-5000ppm or 0-5% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$823.68 
PQN-7133-1/2
(6959)

PROSENSE  PQN-7133-1/2

Prosense PQN-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,003.86 
PQD-7133-1/2
(6747)

PROSENSE  PQD-7133-1/2

Prosense PQD-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,158.30 
GG-CO2-1
(2964)

CALIBRATION TECHNOLOGIES  GG-CO2-1

CTI GasGuard CO2 Carbon Dioxide Infrared Sensor (0-1%, 0-3% and 0-5%) for gas leak detection in wineries, food processing areas, bottling plants and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,473.43 
54001AL-0-9053/005P/L0
(7119)

RC SYSTEMS  54001AL-0-9053/005P/L0

RC Systems SenSmart 5400 3-wire gas detector for Carbon Dioxide (CO2) 0-1.5% or 0-5% with GEN2 smart sensor, Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Div 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays, HART.

Configure

$1,809.09 
SPXCDULNB1
(661)

HONEYWELL  SPXCDULNB1

Honeywell XCD Sensepoint Gas Detector, Carbon Dioxide (CO2) Infrared Sensor with aluminium housing (optional stainless steel), stainless steel sensor head, tri-color backlit LCD Display, explosion-proof IP66 for carbon dioxide (CO2) 3-wire 24 VDC power, include 2 programmable alarm relays, 1 programmable fault relay, 4-20 mA output (sink or source selectable); Modbus RTU option available. User-Selectable full scale range 2%Vol. only UL/CSA Class I Div 1 or ATEX (Zone 1) IECEx available.

Configure

$1,818.44 
100-0008-00-SS-2-2/100-0015-IR-CO2
(4752)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-IR-CO2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Carbon Dioxide (CO2) 0-2% vol, 0-5% vol or 0-3000ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Div 1 certification. Optional 2nd sensor available.

Configure

$1,837.80 
IR-F9-CO2-1-COM
(1547)

HONEYWELL  IR-F9-CO2-1-COM

Honeywell Analytics Manning Airscan IR-F9 gas detector with Infrared sensor for Carbon Dioxide (CO2) with 4-20 mA output, 24VDC Power, NEMA-1 enclosure.

Configure

$2,101.81 
967-425520-100
(6068)

DETCON  967-425520-100

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 10-100%. Includes LED display, 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

34001AL-0-9053/005P/L0
(6897)

RC SYSTEMS  34001AL-0-9053/005P/L0

RC Systems SenSmart 3400 3 wire gas detector for Carbon Dioxide (CO2) 0-1.5% or 0-5% with 'ST-48' smart transmitter with infrared (IR) sensor. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$2,181.82 
967-405520-005
(6067)

DETCON  967-405520-005

Detcon IR-700-CO2 Infrared (NDIR) non-intrusive Smart Sensor for Carbon Dioxide (CO2) 0-5%. Includes LED display, 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

XNXUTAVNNIC1
(2137)

HONEYWELL  XNXUTAVNNIC1

Honeywell XNX Universal Gas Detector Transmitter including MPD AMIC1 IR (infrared) CO2 Carbon Dioxide sensor 0-1%/0-5% Vol. Backlit LCD Display, HART over 4-20 mA output,UL/CSA approved, 5 x 3/4"NPT entries and painted Aluminum. UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2. Optional Alarm Relays, Modbus, Fieldbus.

Configure

$2,390.83 
GDS-IR-1-132-0
(437)

GDS  GDS-IR-1-132-0

GDS GDS-IR Infrared Remote Gas Detector Transmitter with Stainless steel sensor head configured for Carbon Dioxide (CO2) with range 0-3.5%, 0-5% v/v, 3-Wire output 4-20 mA transmitter, Explosion Proof (XP) Class I, Div 1 SIL-2 Rated.

Configure

$2,490.00 
GM/BX-1-053R0500/0
(7294)

GDS  GM/BX-1-053R0500/0

GDS GASMAX BX Gas Detector for Carbon Dioxide (CO2) 0-500ppm to 0-100%, Smart IR or GDS-IR Sensor, 3-wire. Includes 4-20mA analog output and optional 3X isolated 5A alarm relays and MODBUS RTU interface. TFT backlit display. CSA Class I Div 1.

Configure

$2,530.00 
Page: 1 | 2 | All
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.