Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (6752)

PROSENSE  PQD-7934

$1,080.00     Availability: 5 Weeks
 Info/Quote Request
 Shipping Rates
 Volume discount



PROSENSE PQD-7934 (1)
  • Overview
  • Features
  • Specs
  • RELATED
  • Literature

Prosense PQD-7934 Gas Detector with Electrochemical sensor for Hydrogen Chloride (HCL) with range 0-25ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor.

Part# with Options:        PQD-7934
Price with Options:        1,080.00

Options:    

Relays
(1) Relays for Prosense PQD
IP66 Adaptor
(2) Stainless Steel Sensor Adaptor for Prosense PQD & P
No calibration port
Stainless Series Enclosure
(3) Stainless Series Enclosure for Prosense PQD
SIL2
(4) SIL2 Certification for Prosense PQ Detectors by TUV Rheinland (2)

  Availability 5 Weeks  ]

OLED Display

PROSENSE "PQD" Series fixed gas detectors are certified with ATEX/IECEx and SIL2.

Ex-proof Safety

The continuous measurement of toxic and explosive gases is done safely in hazardous areas thanks to the ex-proof housing.

Performance Approval

It complies with the measurement performance criteria in accordance with the IEC EN 60079-29-1 standard.

Functional Safety

Prosense promotes SIL approved products to reduce safety risks associated with increasingly complicated systems as malfunctioning equipment could pose a potential risk. PQ series has ongoing process for SIL-2.

Robust and Durable

SS316 stainless steel sensor head performs perfectly under harsh environmental conditions with the IP65/ IP66 protection class.

Accurate Readings

Pellistor, Electrochemical, PID, and Infrared sensors undoubtedly provide an accurate and sensitive measurement.

Ready to Operate

4-20mA Analog and Modbus RS485 RTU outputs are provided onboard to operate properly without any additional setup.

Easy Maintenance

PQD Series detectors allow sensor replacement with pre-calibrated sensor head thanks to the Procell technology.

OLED Display

The OLED screen can be easily read from any angle.

SAFELOG Data Logger

PQD Series records status up to 250 events. In case of sudden power cut, you can save the data thanks to the cell battery.

Automatic Calibration

Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.

Pellistor-Saver Mode

Detectors power off the sensor in high gas concentration in order to properly secure the operational lifetime of pellistor sensor.

Auto Analog Signal Calibration and Monitoring

PQD Series detectors continuously check the analog output signal level to match the measurement level before promptly transferred to the panel. PQD Series adjusts the signal level in case of any deviation and generates a fault signal when the adjustment fails.

Zero Suppression

Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.

Simple External Equipment Control

Optional relay module enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.

Continuous Self-Test

The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.

Adjustable Parameters

All parameters can be easily changed according to the application requirements or facility standards.

Remote Display

Depending on the application requirements, the screen can be placed separately.

Easy Status Recognition

Colored LEDs (green, yellow and red) provide additional alarm and status information.

Maintenance via Software

Prosense provides software to maintain your active system easily and calibrate the gas detectors properly via computer.

Applications
  • Oil&Gas
  • Petrochemical
  • Onshore/Offshore
  • Steel-Metal Industry
  • Chemical Industry
  • Process Industry
  • Gas Distribution Stations
  • Water Treatment Plants

Specifications PQD-XY36
Sensor Technology Electrochemical
Output Signal 4-20mA and Modbus RS485
Sensor Warm-Up 60sec
Response Time(T90) <30sec
Accuracy %1
Operating Temperature -40°C ~ +70°C
Humidity 0~ 100%RH Non-Condensing
Input Min 10VDC - Max 32VDC - Nominal 24VDC
Display 128x64 Graphic OLED
5 LED indicator for detector status
Event Logging Records alarm, fault and maintenance events up to 250 logs
Power Consumption Max. 4W
Relay Outputs 2 Alarms (Programmable) and 1 Fault (All relays are NO/NC adjustable)
Cable Entry 3 x 1/2" NPT
IP Rating IP65/IP66
Junction Box Epoxy Painted Die-Cast Aluminum / 316 Stainless Steel
Sensor Head 316L Stainless Steel
Dimensions/Weight 196,96x145,99x112mm / 2100gr
ATEX Marking II 2G Ex db IIC T6 Gb
II 2G Ex mb db IIC T6 Gb
I M2 Ex db I Mb
Hazardous Class Zone 1 - Zone 2 - M2
Certificates ExVeritas 18 ATEX 0371X
IECEx EXV 18.0021X
FTZU 18 ATEX 0086
IEP12 ATEX 6118X
Optional SIL2
Standards IEC EN 60079-0
IEC EN 60079-1
IEC EN 60079-18
IEC EN 60079-29-1
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000

  • ACCESSORIES > GAS DETECTORS P/PQ
    PK-K30T Prosense Teflon Calibration cup/cap for P, PQ and B Series gas detectors, tubing entry 4mm diameter tubing. Optional SS316 ..

  • CALIBRATION GAS > HYDROGEN CHLORIDE
    CYL-90097257 Calibration Gas Hydrogen Chloride (HCl) 10 ppm Balance Nitrogen, 58 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas) ..

  • CALIBRATION GAS BW > HYDROGEN CHLORIDE
    CG2L10 Calibration Gas Hydrogen Chloride 10ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas) ..

  • CALIBRATION GAS INDUSTRIAL SCIENTIFIC > HYDROGEN CHLORIDE
    1810-2154 Calibration Gas Hydrogen Chloride 10ppm Balance Nitrogen 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID tag) ..

  • CALIBRATION GAS SCOTT > HYDROGEN CHLORIDE
    077-0124 Calibration Gas Hydrogen Chloride 10ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas) ..

  • CALIBRATION GAS SCOTT > HYDROGEN CHLORIDE
    077-0202 Calibration Gas Hydrogen Chloride 5ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas) ..

  • MULTI-POINT CONTROLLERS > 4-CHANNEL
    S-DP4 Prosense S-DP4 gas control panel for Up to 4 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer . Optional Modbus RS485 output and Alarm/Fault Relays. Polycarbonate Hous ..

  • MULTI-POINT CONTROLLERS > 8-CHANNEL
    S-DP8 Prosense S-DP8 gas control panel for Up to 8 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer. Optional Modbus RS485 output and Alarm/Fault Relays. Polycarbonate Housi ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> HYDROGEN CHLORIDE :    9 Items found.
M001-0008-000
(5998)

MPOWER  M001-0008-000

mPower UNI MP100 Portable Single Gas Detector for detection of Hydrogen Chloride (HCI) 0-15ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.



$313.20 
P-7934
(6791)

PROSENSE  P-7934

Prosense P-7934 Gas Detector with Electrochemical sensor for Hydrogen Chloride (HCl) with range 0-25ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

961-090026-030G
(6365)

DETCON  961-090026-030G

Detcon DM-100-HCL Electrochemical Hydrogen Chloride (HCl) 0-30ppm Sensor Assembly with loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div. 1, Groups A, B, C, & D.

ITRANS2-1F40000
(6293)

OLDHAM  ITRANS2-1F40000

Oldham iTrans 2 Fixed Gas Detector with electrochemical smart sensor for Hydrogen Chloride (HCl) 0.2-30 ppm. 4-20mA optional RS-485 Modbus/HART and 3 alarm relay outputs. Explosion-proof NEMA 4X Enclosure. IP66. CSA, ATEX and IECEx Approvals.

S3KUL2-XNXXSR1SS
(692)

HONEYWELL  S3KUL2-XNXXSR1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring HYDROGEN CHLORIDE (HCI) with electrochemical sensor, 2-wire 4-20mA loop, LCD Display, 0-10ppm, user adjustable (10.0 to 20.0ppm, 1.0ppm increments) Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$1,598.21 
967-090990-030
(6090)

DETCON  967-090990-030

Detcon DM-700-HCL Electrochemical "Smart" Hydrogen Chloride (HCL) 0-30 ppm Sensor Assembly with LED display. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

XNXUTAENNNNN-XNXXSR1SS
(843)

HONEYWELL  XNXUTAENNNNN-XNXXSR1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Hydrogen Chloride (HCl) 0-10ppm, user adjustable (10.0 to 20.0ppm, 1.0ppm increments) compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2

Configure

$1,997.75 
ITR2SA-1F40000
(6309)

OLDHAM  ITR2SA-1F40000

Oldham iTrans 2 Stand-Alone Gas Detector with electrochemical smart sensor for Hydrogen Chloride (HCl) 0.2-30 ppm. 4-20mA. NEMA 4X/IP66 Enclosure to be installed in safe area only (Non-Explosion Proof, no relays nor Modbus/HART available)



 
EX-HCL-30P-O
(6026)

MACURCO  EX-HCL-30P-O

Macurco Ex Series Explosion Proof Electrochemical Gas Detector for detection of Hydrogen Chloride (HCL) 0-30ppm. Includes 4-20 mA Output, 3 Onboard Relays, Modbus RS-485 Communication and LCD Digital Display. Aluminium Enclosure. IP66. CSA approvals for Class I Division 2.

Configure

$2,493.75