ESP Safety Vector 2-channel gas detector controller with smart Plug-In Sensor to Detect Hydrogen Sulfide (H2S) 0-20, 0-50 or 0-100ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification.
Part# with Options:
Price with Options:
0-0 to 100 ppm $0.00 1-0 to 20 ppm $0.00 2-0 to 50 ppm $0.00
(1) Gas Range for ESP Safety PGU H2S
__-None $0.00 Cl2-Chlorine 0 to 10ppm $517.50 CO-Carbon Monoxide 0 to 100ppm $517.50 CO-Carbon Monoxide 0 to 500ppm $517.50 CO-Carbon Monoxide 0 to 1000ppm $517.50 CO2-Carbon Dioxide 0 to 2% $517.50 CO2-Carbon Dioxide 0 to 5% $517.50 CO2-Carbon Dioxide 0 to 3000ppm $517.50 H2-Hydrogen 0 to 4% (0 to 100% LEL) $517.50 H2S-Hydrogen Sulfide 0 to 100ppm $517.50 H2S-Hydrogen Sulfide 0 to 20ppm $517.50 H2S-Hydrogen Sulfide 0 to 50ppm $517.50 C1-Methane 0 to 5% (0 to 100% LEL) $517.50 NH3-Ammonia 0 to 100ppm $517.50 O2-Oxygen 0 to 30% $517.50 C3-Propane 0 to 100% LEL $517.50 SO2-Sulfur Dioxide 0 to 20ppm $517.50 SO2-Sulfur Dioxide 0 to 100ppm $517.50
(2) Sensor for ESP Safety Vector
ESP Safety’s Vector is a state-of the-art field control unit that performs as an integrated control terminal and display for ESP Safety’s gas detector product line.
The Vector can operate as a stand-alone display for a variety of ESP Safety’s detectors which can be remotely located up to 500 feet away. A sensor head can also be attached directly to the display housing to produce a unified detector/display unit.
A vivid, 2.7” (diagonal) 128x64 pixel resolution, OLED screen simultaneously displays a wide range of data including gas concentrations, alarm levels, faults and operational modes.
Analog 4-20 current loop w/ HART , Digital RS-485 Modbus RTU and 4 relays are standard data communication channels of the VECTOR FCU
Event log is stored in on-board memory and is accessible via RS-485 Modbus RTU
Operating Temp Range of -58°F to +167°F (-50°C to +75°C)
Configurable to control & monitor up to 2 detectors
SIL certification by independent 3rd party agency
316 Stainless Steel construction, explosion-proof housing, Class 1, Division 1
Non-Instrusive, on-site detector calibration via a HART Field Communicator or Magnectic Wand
Shipping tankers, freighters, and other vessels
LNG/LPG processing & storage facilities
Oil & gas refineries
Gas & electric utilities
Non-intrusive operator interface is easily achieved by contacting a magnetic wand with the glass housing cover and accessing the intuitive, menu-driven programming screen
Tri-color status LED indicates operational mode, fault & gas presence
Two - Analog 4-20mA Relay Outputs
Four - Direct Relay Outputs are standard