Macurco 70-2900-0605-3 | Macurco | Sensors (replacement) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

MACURCO   70-2900-0605-3

SKU# (2526)



MACURCO 70-2900-0605-3

ACCESSORIES & PARTS / SENSORS (REPLACEMENT)
MACURCO

$347.25  [2 Days]
  • DESCRIPTION
MACURCO TX-6-AM (TX-12-AM) Ammonia NH3 Replacement sensor. (Replaces 26-2900-0005-4)

70-2900-0605-3   
347.25

Service Fee
Only applies to firmware versions below 1.14 and includes firmware update, sensor installation and calibration at the factory, it does not include shipping. Firmware version is displayed upon power up.

  [  2 Days  ]


 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    2 Items found.
TX-6-AM
(2044)

MACURCO  TX-6-AM

Macurco TX-6-AM low voltage Gas Detector, Controller and Transducer for Ammonia (NH3) 0-100 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$687.74 
TX-12-AM
(3418)

MACURCO  TX-12-AM

MACURCO TX-12-AM line voltage Gas Detector, controller and transducer for Ammonia (NH3) 0-100 ppm. Selectable 4-20mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1.

Configure

$690.96 
> MACURCO :    19 Items found.
(3616)

MACURCO  CM-E1 Harness

MACURCO CM-E1 Wire Harness with White Plug for CM-E1 Gas Detectors.



$6.85 
CM-E1-IAK
(3617)

MACURCO  CM-E1-IAK

MACURCO CM-E1-IAK Installation Adapter Kit used to retrofit Macurco-2 gang type installations (CM-15, CM-15A, CM-16A, etc) to CM-E1 single gang detectors.



$19.38 
70-2900-0541-2
(5830)

MACURCO  70-2900-0541-2

Macurco tygon calibration hose/tubing 0.250 OD X 0.125 2 feet for calibration hoods.



$28.00 
(7193)

MACURCO  70-5354-0001-21

Macurco RD-VRF-CH Calibration Hood used to calibrate RD-VRF Detectors



$33.37 
CM-CH
(1862)

MACURCO  CM-CH

MACURCO Calibration Hood/cup for CM-6/12 carbon monoxide gas detector



$33.38 
GD-CH
(1863)

MACURCO  GD-CH

MACURCO Calibration Hood/cup for GD-6/12 combustibles LEL gas detector



$33.38 
CX/TX-CH
(2117)

MACURCO  CX/TX-CH

MACURCO Calibration Hood/cup for CX, TX, OX, & RD series gas detectors: ammonia (NH3), hydrogen sulfide (H2S) and Nitrogen Dioxide (NO2).



$33.38 
PS-24
(6050)

MACURCO  PS-24

MACURCO AC/DC Plugin Stepdown Transformer - 90 to 264 VAC input, 24 VDC output, 1 Amp. For use with Series 6, CM-E1, GD-2B detectors and alarms.



$51.67 
70-2900-0605-5
(7168)

MACURCO  70-2900-0605-5

MACURCO CX-6 (CX-12) Carbon Monoxide CO Replacement sensor.

Configure

$58.91 
70-2900-0605-6
(7169)

MACURCO  70-2900-0605-6

MACURCO CX-6 (CX-12) Nitrogen Dioxide NO2 Replacement sensor.

Configure

$81.21 
70-2900-0605-2
(6328)

MACURCO  70-2900-0605-2

MACURCO OX-6 (OX-12) Oxygen O2 Replacement sensor. (Replaces 26-1017-4969-0)

Configure

$93.65 
MRS-485
(2947)

MACURCO  MRS-485

MACURCO Modbus RS-485 Slave Adapter for use with Macurco 6-Series gas leak detectors to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a Modbus digital signal for use with multipoint addressable systems and control panels such as the DVP-120M. Plugs into the back of the detector.



$118.05 
(6048)

MACURCO  HS-SYNC

Macurco HS-SYNC Synchronization Module for use with multiple Macurco Horn & Strobe units.



$123.71 
CM-E1-IAK/10
(3618)

MACURCO  CM-E1-IAK/10

MACURCO CM-E1-IAK Installation Adapter Kit (10 Pack) used to retrofit Macurco-2 gang type installations (CM-15, CM-15A, CM-16A, etc) to CM-E1 single gang detectors.



$133.98 
WHK-1
(3518)

MACURCO  WHK-1

Macurco WHK-1 weatherproof enclosure to protect all Macurco Series 6/12 standard 4x4 mount gas detectors Compatible with CM-6, GD-2A, GD-6, TX-6, OX-6, CX-6, CM-2B, CM-3, CM-4, HD-11, ND-2 and GT-11A gas detectors. NEMA-1



$183.15 
DMK-1
(643)

MACURCO  DMK-1

Macurco DMK-1 Duct Mount Kit provides a means to duct mount standard 4 x 4 Macurco fixed gas detectors (single gang type need mud-ring). The DMK-1 features an air tight enclosure, clear cover that allows view of detector status lights, hardware, exhaust tube and mounting template. Compatible with CM-6, GD-2A, GD-6, TX-6, CM-2B, CM-3, CM-4, HD-11, ND-2 and GT-11A gas detectors.



$188.12 
70-2900-0605-4
(2527)

MACURCO  70-2900-0605-4

MACURCO TX-6-HS (TX-12-HS) Hydrogen Sulfide H2S Replacement sensor. (Replaces 26-2900-0006-5)

Configure

$212.16 
70-2900-0605-1
(2528)

MACURCO  70-2900-0605-1

MACURCO TX-6-ND (TX-12-ND) Nitrogen Dioxide NO2 Replacement sensor. (Replaces 26-1017-5342-9)

Configure

$217.12 
(7191)

MACURCO  70-5354-0001-16

Macurco VRF Communicator Handheld keypad that connects to the RD-VRF detectors to calibrate and customize the detectors



$598.40 
() Reviews | Write One      
....

70-2900-0605-3     $347
MACURCO / Accessories & Parts
Sensors (replacement) / Macurco
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.