The Sensepoint range of flammable, toxic
and Oxygen gas detectors offer users a high
quality, low cost solution to their industrial gas
monitoring needs. Installation in potentially
explosive atmospheres is made by the use of
a suitable Ex d or Ex e approved junction box.
The industry standard outputs from
Sensepoint are connected to either a choice
of Honeywell Analytics’ controllers or 3rd
party DCS/ PLC systems. Both flammable and
toxic versions are certified to the latest ATEX/
IECEx safety and performance standards.
The flammable detector is available in either % LEL
or PPM detection range versions and provides
an industry standard mV bridge output.
Typical life expectancy is greater than 5 years,
after which the detector is simply replaced with a
The toxic detectors are supplied pre calibrated for
easy installation and provide an industry standard
2 wire 4-20mA loop output. User connections
are Ex d, while front end Intrinsic Safety (IS) design
allows for easy exchange of the replaceable
sensor while powered. IS design also removes
the need for a sinter enabling very fast speed
of response and detection of ‘sticky’ gases such
as Chlorine and Ammonia.
Sensepoint has proven its suitability across a wide
range of demanding applications by delivering high
performance and reliability at an affordable cost.
Fit For Purpose
Proven Sensor Technology
- Flammable, toxic and Oxygen
- High performance, low cost
- Suitable for new and retro fit applications
- SurecellTM electrochemical sensors
- Poison resistant catalytic bead
- Fast and reliable
- Typical 2 to 5 years operational life
Range of Accessories
- Complies with the latest standards
- Hazardous area approval and performance
- IP65/67 for use in harsh environments
Easy to Use
- Factory set operation
- Simple to replace
- Minimal training required
- Weatherproof cap
- Flow adaptor
- Duct mounting kit
- Collecting cone
Sensepoint flammable and toxic gas detectors are installed using suitable Ex d or Ex e junction boxes.
The standard junction box available from Honeywell Analytics includes an earth continuity plate for
added RFI protection. The detectors have a choice of mounting thread size to match local preferences.
The Sensepoint range of flammable and toxic detectors are designed for use with a wide range
of controllers available from Honeywell Analytics or with 3rd party control equipment accepting
their industry standard output signals.