Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas

(4725)

ESP SAFETY 100-0008-SS

ESP Safety Vector 2-channel gas detector controller . Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. It can be configured with one or two optional sensors, including: Chlorine (Cl2), Carbon Monoxide (CO), Carbon Dioxide (CO2), Hydrogen (H2), Hydrogen Sulfide (H2S), Methane (CH4), Ammonia (NH3), Oxygen (O2), Propane (C3H8) and Sulfur Dioxide (SO2).

Configure

$922.50

(326)

GDS 10-9513-R01

Electrochemical Smart Sensor configured for Chlorine Dioxide (ClO2) with range 0-1 ppm. For GDS GASMAX EC, GASMAX II, TRANSMAX EC, TRANSMAX II with stainless steel sensor head and GDS GASMAX ECx, GASMAX IIx, GDS-49, GDS-58XP.

(3353)

GDS 10-9813-R01

Electrochemical Smart Sensor configured for Chlorine Dioxide (ClO2) with range 0-1 ppm. For GDS GASMAX CX, GDS-58NXP, GDS-68XP, GDS-78XP.

(1696)

HONEYWELL 2110B3130

Toxic Electrochemical Sensor Cartridge for Chlorine Dioxide (ClO2) 0-0.4 ppm for Honeywell Sieger Apex Detector. *** Phased out ***

(6175)

DETCON 377-747601-050

Detcon Chlorine Dioxide (CLO2) plug-in sensor for DM-700-CLO2 (0-50ppm)

(6174)

DETCON 377-777701-001

Detcon Chlorine Dioxide (CLO2) plug-in sensor for DM-700-CLO2 (0-1ppm)

(3769)

ACD 510-2060-00

Chlorine Dioxide (ClO2) Cell, 0.5 to 50 ppm, 50 hours for CAL 2000 Portable calibration gas generator.

$806.08

(3770)

ACD 510-2060-20

Chlorine Dioxide (CO2) Cell, 0.5 to 50 ppm, 100 hours for CAL 2000 Portable calibration gas generator.

$1,285.68

(3798)

ACD 750-0200-01

ACD GENie EC Hand-held, portable battery-powered calibration standards (calibration gas generator) for electrochemical gases. Field adjustable concentration. Interchangeable sources for Chlorine (Cl2), Chlorine Dioxide (ClO2), Hydrogen (H2), Hydrogen Cyanide (HCN). Includes GENie base unit, GENie EC module, 5 foot hose, nylon carrying case, batteries, charcoal filter and manual.

Configure

$1,981.76

(5215)

KWIKDRAW 804133

KwikDraw 2-BOXES Gas Detector Tubes for Chlorine Dioxide 0.05 - 15 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5086812

$144.32

(6354)

DETCON 961-770026-001G

Detcon DM-100-CLO2 Electrochemical Chlorine Dioxide (ClO2) 0-1ppm or 0-50ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. Optional 316 Stainless Steel Housing. 3/4" NPT thread. XP-instrinsically safe. Class I, Div. 1, Groups A, B, C, & D.

Configure

(6077)

DETCON 967-747690-050

Detcon DM-700-CLO2 Electrochemical Smart Chlorine Dioxide (CLO2) 0-50 ppm Sensor Assembly with LED display. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

(6076)

DETCON 967-777790-001

Detcon DM-701-CLO2 Electrochemical Smart Chlorine Dioxide (CLO2) 0-1 ppm Sensor Assembly with LED display. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

(6385)

BW BWS1-V-Y

BW Solo Serviceable Single-gas Detector for Chlorine Dioxide (ClO2) 0-1 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

(5973)

GDS C2-WWT-1-1-0-1

GDS C2-WWT Triple Gas Sample Draw Gas Monitor for waste water gases in Ambient Air, Hydrogen Sulfide (H2S), Oxygen (O2) and Methane/Propane LEL. Integrated Sample Draw Pump and Flow Monitor Circuitry. Includes red and amber LED strobes and 8 programmable 5A relays. Optional MODBUS TCP interface. Optional toxic sensors: Chlorine (Cl2), Carbon Monoxide (CO) and Sulfur Dioxide (SO2). *** phased out ***

(119)

GDS GM/EC-03-13-01

GDS GASMAX/EC 2-Wire Gas Detector with backlit LCD display and local stainless steel sensor head (non-XP) configured for Chlorine Dioxide (CLO2) with range 0-1 ppm, 4-20 mA output transmitter.

(3423)

GDS GM/TX/03-13-01/00-00-00/1-0900

GDS GASMAX TX Stand-Alone Wireless Gas Monitor with stainless steel sensor head (non-XP) and integrated sensor configured for Chlorine Dioxide (CLO2) with range 0-1 ppm. Battery-Powerded. 900 MHz or 2.4 GHz Integrated Modems. LCD Display and Aluminium Housing. FCC and IC approvals.

(3287)

GDS GMCX-03-13-01/00-00-00/0

GDS GASMAX CX 3-Wire Gas Detector with local stainless steel sensor head (non-XP) configured for Chlorine Dioxide (CLO2) with range 0-1 ppm, QVGA color TFT display, 4-20 mA output transmitter, Ethernet Modbus TCP RJ-45 port with built-in web server. Optional Alarm Relay Board (4x 5A SPDT) and RS-485 Modbus RTU. For non-clasified areas only

(137)

GDS GMII-03-013-01/00-000-00/0-0

GDS GASMAX II 3-Wire Gas Detector with backlit LCD display and local stainless steel sensor head (non-XP) configured for Chlorine Dioxide (ClO2) with range 0-1 ppm, 4-20 mA output transmitter with optional Alarm Relay Board (3x 5A SPDT) and RS-485 Modbus RTU.

(222)

GDS GMII-03-013-01/01-061-05/0-0

GDS GASMAX II 3-Wire Gas Detector with backlit LCD display and local stainless steel sensor head configured Photoionization Detector for VOC with range 0-20 ppm (low VOC)/0-2000 ppm (high VOC), 4-20 mA output transmitter and Alarm Relay Board (3x 5A SPDT) and RS-485 Modbus RTU. Second channel with backlit LCD display and local stainless steel sensor head (non-XP) configured for Chlorine Dioxide (ClO2) with range 0-1 ppm (included).

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080. Powered by: