Gasdetectorsusa.com: Gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas
Honeywell Analytics, Prosense, Felix Instruments, Solo, Ion Science, Spectrex, Intec Controls, E2S, RC Systems, ESP Safety, CoolAir, Portagas, Macurco, MEDC, CO2 Meter, GDS Corp, mPower, KwikDraw Uniphos, ACD
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
TX-6-ND
(2046)

MACURCO  TX-6-ND

Macurco TX-6-ND low voltage Gas Detector, Controller and Transducer for Nitrogen Dioxide (NO2) 0-20 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC. power ETL Listed to UL 61010-1.

Configure

$648.99 
CANN20P
(3629)

MACURCO  CANN20P

MACURCO CANN20P Propane (C3H8) Replacement Gas. 34L. 20% LEL.



$98.63 
BROKER AGENT
(7057)

GAS DETECTORS USA  BROKER AGENT

GasDetectorsUSA.com international purchase brokerage agent services, provide businesses and individuals located in different countries with the process of buying goods or services from suppliers located in the United States, acting as an intermediary between the buyer and the supplier. Fee Schedule based on purchase amount: $0-$1000 = 12%+$25, $1000-$3000 = 10%, $3000-$8000 = 9%, $8000-$15,000 = 8%, $15,000-$30,000 = 7%, $30,000-$50,000 = 6%, $50,000-$90,000 = 5%, $90,000-$150,000 = 4%, >$150,000 = 3%



 
SAM-8M
(5429)

UNIPHOS  SAM-8M

Uniphos 2-BOXES Gas Detector Tubes for Ammonia 1-20% Extended range, 10 tubes per box, 5-mm diameter tubes for use with piston hand pumps.



$105.84 
SND-2
(5646)

UNIPHOS  SND-2

Uniphos 2-BOXES Gas Detector Tubes for Nitrogen Dioxide 0.5-30 ppm Standard range, 10 tubes per box, 5-mm diameter tubes for use with piston hand pumps.



$105.84 
804136
(5346)

KWIKDRAW  804136

KwikDraw 2-BOXES Gas Detector Tubes for Tetrahydrofuran half quantitative: 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5086818



$153.12 
MP42-20000-000
(6827)

MPOWER  MP42-20000-000

mPower MUNI MP420 Compact 4-gas detector, options for Oxygen (O2) 0.1-30.0% Vol, combustibles (LEL) 1-100% LEL, Carbon Monoxide (CO) 1 - 1000 ppm and Hydrogen Sulfide (H2S) 0.1 - 100 ppm on hazardous locations. Alternative sensors available for Lead Free Oxygen (O2), Methane (CH4), Sulfur Dioxide (SO2) and Hydrogen Cyanide (HCN). Diffusion sampling. Audible (95dB), Visual (tri-color LEDs) and Vibration alarms. Includes rechargeable Li-ion battery, calibration cap and events logger. IP68. UL approved for Class I Div 1, IECEx and INMETRO.

Configure

$240.00 
SCOTT-077-0125-EQUIV
(2429)

PORTAGAS  SCOTT-077-0125-EQUIV

Calibration Gas Ammonia 50ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$252.43 
AL112NHDC024R/A
(5129)

E2S  AL112NHDC024R/A

E2S AL112NH Alarm Horn Sounder (A112N) 119dB(A) and High Output LED Beacon (L101H). 24VDC. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

P-3035
(6721)

PROSENSE  P-3035

Prosense P-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$437.58 
PC3-6424
(6805)

PROSENSE  PC3-6424

Prosense PC3-6424 Gas Detector with Electrochemical sensor for Hydrogen Sulfide (H2S) with range 0-100 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$514.80 
PQD-5535-1/2
(6736)

PROSENSE  PQD-5535-1/2

Prosense PQD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Ethane, Butyl Alcohol, Styrene, Propylene, Xylene, Benzene, Vinyl Acetate, JP8 Fuel, Diesel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$772.20 
PQD-3033-1/2
(6719)

PROSENSE  PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,132.56 
DVP-120B
(6227)

MACURCO  DVP-120B

Macurco DVP-120B Addressable Detection and Ventilation Panel with BACnet MS/TP output. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on two channels and 12 4-20mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,752.43 
XNXUTAENNNNN-XNXXSH1SS
(846)

HONEYWELL  XNXUTAENNNNN-XNXXSH1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Hydrogen Sulfide (H2S) compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2. Optional ranges: 0-15ppm, 0-100ppm

Configure

$1,963.60 
51001AL-0-1014/0010P/L0
(7127)

RC SYSTEMS  51001AL-0-1014/0010P/L0

RC Systems SenSmart 5100 3-wire gas detector for Hydrogen Chloride (HCl) 0-10 to 0-30ppm with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class 1 Div 2 (Non-Incendive). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$2,081.82 
39001AL-0-9022/0010P/9071/100L/L0
(6887)

RC SYSTEMS  39001AL-0-9022/0010P/9071/100L/L0

RC Systems SenSmart 3000 3 wire gas detector with 'ST-48' smart transmitter for Hydrogen Sulfide (H2S) 0-10ppm to 0-2000ppm and aditional gas with catalytic bead or infrared sensor (Acetylene, Methane, HC or Propane). Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1(Explosion Proof).

Configure

$2,770.13 
ST71P-1
(7026)

RC SYSTEMS  ST71P-1

RC Systems ViewSmart 1600+ 8 or 16-Channel Gas Detector Integral Alarm Controller with standard 5x 5A SPDT relays, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 24VDC power supply. Optional 4-20mA inputs, 4-20mA outputs, discrete and programmable alarm relays channels boards.

Configure

$6,217.56 
TPPR-W-100-3
(5927)

HONEYWELL  TPPR-W-100-3

Honeywell Touchpoint Pro 100A + Fault Tolerant + Power Distribution (6x 20A PSU + 3x RDN)



$9,935.65 
ST-72-02
(6921)

RC SYSTEMS  ST-72-02

RC Systems ViewSmart 6400 Digital Gas Detection CONTROLLER with 16, 32, 48 or 64 channels and LCD display of 320x240 pixels. Centralize display and alarm functions. UL and CSA approved for Class I, Division 2, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included. Standard SPDT 5A relays for HORN and FAULT, plus 3 programmable alarm relays included. NEMA 4X, NEMA 4X Stainless Steel, full 19" Rack mount and NEMA 7 wall-mount options. Optional 4-20mA inputs.

Configure

$12,179.52 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.