Kwiksense Ks1000u2-ssa0015a | Ozone | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

KWIKSENSE   KS1000U2-SSA0015A

SKU# (7628)



KWIKSENSE KS1000U2-SSA0015A

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
OZONE

$1,730.60  [4 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Uniphos KwikSense Pro Smart Gas Detector with Electrochemical Sensor for Ozone (O3) 0-1 ppm. Includes 4-20 mA, MODBUS RS-485 and HART outputs, 3 Alarm relays, OLED Display, Aluminum Enclosure (optional Stainless Steel). ATEX/IECEx/SIL2 Approved. IP66.

DISPLAY   4-20 mA   RELAYS   ATEX   IECEX   SIL2   HART   MODBUS

KS1000U2-SSA0015A   
1,730.60

Enclosure
Cable Entry

  [  4 Weeks  ]
4 Variants of base SKU
Description

The KwikSense Pro smart digital gas transmitter is a field mountable gas detector suitable for the detection and continuous monitoring of hazardous gases in industrial plants.

A truly universal transmitter, it is compatible with any one of our more than 100 smart gas sensors, which include oxygen, toxic gases, combustible gases and volatile organic compounds (VOCs).

  • Digital Communication on MODBUS over RS-485 / HART over 4-20mA
  • Industry standard 4-20mA analog output
  • 3 potential free relay contacts
  • Pre-Calibrated Smart Sensor capable of swapping between any sensor technology
  • Sensor Technologies Available
    • Electrochemical
    • Pellistor
    • Solid State
    • NDIR
    • PID
    • MPS
  • Non-intrusive Calibration
  • Bright OLED display
KwikSense Lite Digital Gas Transmitter

The Uniphos KwikSense Lite Transmitter offers users a low-cost solution to their gas monitoring needs.

The KwikSense Lite comes with a single gas swappable sensor facility and a single potential free relay contact for alarm.

MED certification is applicable for Oxygen and Flammable gases.

Specifications
  • Swappable Smart Sensor for single gas
  • Sensor Technologies available: EC, PEL, NDIR, PID & SS
  • Industrial standard 4-20 mA output
  • Tri-color LEDs indicate alarm
KwikSense RD Remote Display

The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location.

This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required.

It can act as a controller or as a bridge between the detector and controller.

Specifications
  • Configuration via non-intrusive magnetic wand
  • It accepts industry standard 4-20mA input available from detector and provides RS-485 MODBUS and 4-20mA output to connect with the controller
  • Tri-color LEDs have been provided to signal the alarm condition
Certifications: KwikSense Pro
  • ATEX certified by SGS BASEEFA
    II 2 G Ex db IIC T6 Gb (Tamb = -40°C to +55°C)
    Ex db IIC T5 Gb (Tamb = -40°C to +70°C)
    Ex db IIC T4 Gb (Tamb = -40°C to +85°C)
    - Not applicable with remote sensor option
  • IECEx Certified Certificate No: IECEx BAS 14.0148X
    Ex db IIC T6 Gb (Tamb = -40°C to +55°C)
    Ex db IIC T5 Gb (Tamb = -40°C to +70°C)
    Ex db IIC T4 Gb (Tamb = -40°C to +85°C)
  • SIL-2 Certified
  • HART Registered

General Specifications
Sensor Technology: EC, PEL, NDIR, PID, SS, MPS
Operating Voltage: 18V to 30 VDC
System Type: ĩController based instrument (non intrusive calibration)
Display: 8 x 2 OLED Display
Sampling Type: Diffusion
Sensor: Swappable Smart Sensor
LEDs: Tri-color LED
Alarms: Two user settable alarms
Output: 4-20mA, MODBUS over RS-485, HART over 4-20 mA
Relays: 3 potential-free contacts
Load Resistance: 600 Ω (max)
Power Consumption: < 3 W
Enclosure: Flameproof Cast Aluminium alloy
Ingress Protection: IP 66
Dimensions (mm): Approx. 155 x 145 x 100 (WO cable gland & stopper)
Wire Configuration: 3/4 wires
Interface: Calibration & configuration via non-intrusive magnetic wand
Operating Temperature: -40°C to +65°C (depend on sensor)
Operating Pressure: Ambient + 10%
Operating Humidity: 0-95% RH (Extended exposure to extreme humid conditions may degrade sensor performance)
Cable Entries: ―” NPT (M20) - 2 entries / ū” NPT (M25) - 2 entries
Certifications: ATEX, IECEx, SIL2, CE, HART
Weight: 2.3 kg (Approx.)
Export Info
Made inIndia
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping & Handling

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    6 Items found.
(7605)

KWIKSENSE  ER003605

Kwiksense Splash Guard/Rain Shield for KwikSense Pro



$101.01 
ER004028
(7606)

KWIKSENSE  ER004028

Kwiksense Gas Collection Cone for KwikSense Pro



$143.78 
ER004752
(7609)

KWIKSENSE  ER004752

Kwiksense Pipe Mounting Kits for KwikSense Pro



$185.64 
(7608)

KWIKSENSE  ER001008

Kwiksense Canopy (Metallic or FRP) for KwikSense Pro

Configure

$185.64 
EF001557
(7610)

KWIKSENSE  EF001557

Kwiksense Flow Through Adapter (Flow Cell) for KwikSense Pro



$242.97 
ER004091
(7607)

KWIKSENSE  ER004091

Kwiksense Duct Mounting Kit for KwikSense Pro



$414.96 
> OZONE :    18 Items found.
M001-0009-000
(6006)

MPOWER  M001-0009-000

mPower UNI MP100 Portable Single Gas Detector for detection of Ozone (O3) 0-1ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div ... more



$411.08 
BWS1-G-Y
(6393)

BW  BWS1-G-Y

BW Solo Serviceable Single-gas Detector for Ozone (O3) 0-1 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

 
SV-8204
(7392)

PROSENSE  SV-8204

Prosense SafeVader SV-8204 Fixed Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1ppm or 0-5ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$1,203.32 
P-8234
(6792)

PROSENSE  P-8234

Prosense P-8234 Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, ... more

Configure

$1,457.36 
PXN-8234-1/2
(7354)

PROSENSE  PXN-8234-1/2

Prosense PXN-8234 Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1 ppm or 0-5ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, ... more

Configure

$1,608.50 
PQN-8234-1/2
(6966)

PROSENSE  PQN-8234-1/2

Prosense PQN-8234 Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Marine Bureau Veritas Certification (MED), Alarm Relay card. ATEX/IECEx (Zone ... more

Configure

$1,770.43 
PXD-8234-1/2
(7353)

PROSENSE  PXD-8234-1/2

Prosense PXD-8234 Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1 ppm or 0-5ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx ... more

Configure

$1,792.03 
PQD-8234-1/2
(6753)

PROSENSE  PQD-8234-1/2

Prosense PQD-8234 Gas Detector with Electrochemical sensor for Ozone (O3) with range 0-1ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Marine Bureau Veritas Certification (MED), Alarm Relay card. OLED Display. ... more

Configure

$1,975.54 
1100ALD-109025/1P-L0
(6922)

RC SYSTEMS  1100ALD-109025/1P-L0

RC Systems SenSmart 1100 gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20 mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$2,042.86 
41001AL-0-1025/0001P/L0
(7180)

RC SYSTEMS  41001AL-0-1025/0001P/L0

RC Systems SenSmart 4100 2-wire 4-20 mA loop powered gas detector for Ozone (O3) 0-1 ppm, 0-2ppm, 0-5 ppm, 0-10 ppm, 0-20 ppm with GEN 2 smart Electrochemical sensor. Includes LCD Display. 10-30 VDC, Two flashing Alarm LEDs. Aluminum, Stainless ... more

Configure

$2,081.82 
51001AL-0-9025/1P/L0
(7133)

RC SYSTEMS  51001AL-0-9025/1P/L0

RC Systems SenSmart 5100 3-wire gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with Color backlit LCD Display and 4-20 mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive). Optional 2 RS-485 ... more

Configure

$2,140.26 
961-390026-001C
(6373)

DETCON  961-390026-001C

Detcon DM-100-O3 Electrochemical Ozone (O3) 0-1 ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, ... more

Configure

 
2100AL-0-9025/1P/L0
(133)

RC SYSTEMS  2100AL-0-9025/1P/L0

RC Systems SenSmart 2100 2 wire 4-20 mA Loop Powered gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output. 10-30 VDC. Stainless steel or ... more

Configure

$2,535.06 
967-393990-001A
(6097)

DETCON  967-393990-001A

Detcon DM-700-O3 Electrochemical Smart Ozone (O3) 0-1 ppm Sensor Assembly with LED display. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups ... more

Configure

 
31001AL-0-9025/1P/L1-ARC
(6923)

RC SYSTEMS  31001AL-0-9025/1P/L1-ARC

RC Systems SenSmart 3100 3 wire gas detector for Ozone (O3) 0-1 ppm or 0-2 ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. ... more

Configure

$2,719.48 
6100AL1-0-1025/00001P-L0
(7016)

RC SYSTEMS  6100AL1-0-1025/00001P-L0

RC Systems SenSmart 6100 3 wire Dual Channel Gas Detector for Ozone (O3) 0-1 ppm, 0-2 ppm, 0-5 ppm, 0-10 ppm, 0-20 ppm with 'ST-44' smart transmitter and GEN2 smart Electrochemical sensor. Includes Color TFT Display, 4-20 mA output. ... more

Configure

$2,962.33 
SP-0648-1050/0001L_S_
(7457)

RC SYSTEMS  SP-0648-1050/0001LS

RC Systems SensePoint single point gas detector for Ozone (O3) 0-1 ppm with GEN 2 smart Electrochemical sensor. Includes backlit display, 4-20 mA and RS-485 Modbus outputs and 3 programmable relays. 24 VDC. NEMA 4x Fiberglass enclosure.

Configure

$3,037.66 
71001AL1900_-0-1025/0001P/L0-2189
(7407)

RC SYSTEMS  71001AL1900-0-1025/0001P/L0-2189

RC Systems SenSmart 7100 Wireless gas detector for Ozone (O3) 0-1 ppm with GEN 2 smart Electrochemical sensor, 900Mhz or 2.4Ghz. Includes LCD Display, Five flashing Alarm LEDs and D-cell lithium battery. Optional 10-30 VDC power board. Aluminum, Stainless Steel ... more

Configure

$3,955.84 
MIRAMAR AUTOMATION LLC       
....

KS1000U2-SSA0015A     $1,731
KWIKSENSE / Detectors
Gas Detectors (explosion-proof) / Ozone
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.