Prosense P-6534 | Oxygen | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

PROSENSE   P-6534

SKU# (6781)



PROSENSE P-6534

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
OXYGEN

$564.86  [3 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Prosense P-6534 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

4-20 mA   RELAYS   ATEX   IECEX   ZONE 1   ZONE 2   MODBUS

P-6534   
564.86

Relays
IP66 Adaptor
No calibration port

  [  3 Weeks  ]
Trustworthy Certification

PROSENSE "P" Series fixed gas detectors are certified with ATEX/IECEx.

Ex-proof Safety

The continuous measurement of toxic and explosive gases is done safely in hazardous areas thanks to the ex-proof housing.

Robust and Durable

SS316 stainless steel sensor head performs perfectly under harsh environmental conditions with the IP65 protection class.

Accurate Readings

Pellistor, Electrochemical, and Infrared sensors undoubtedly provide an accurate and sensitive measurement.

Ready to Operate

4-20mA Analog and Modbus RS485 RTU outputs are provided onboard to operate properly without any additional setup.

Easy Maintenance

P Series detectors allow sensor replacement with pre-calibrated sensor head thanks to the Procell technology.

Automatic Calibration

Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.

Pellistor-Saver Mode

Detectors power off sensor in high gas concentration in order to properly secure the operational lifetime of Pellistor sensor.

Auto Analog Signal Monitoring

P Series detectors carefully check the analog output signal level continuously to match the measurement level before promptly transferred to the panel. P Series adjust the signal level in case of any deviation and generate fault signal when adjustment fails.

Universal Communication Protocols

  • 4-20mA Analog and Modbus RS485 RTU outputs are simple to operate efficiently.
  • P Series open-source Modbus codes support successful integration to SCADA systems.
  • P-3R+ relay module can be properly integrated into P Series detectors for extra operations.

Zero Suppression

Adjusting, the detector will show a certain measurement level as 0 (zero) to avoid unnecessary concerns.

Fail-Safe Technology Alarming

Alarm 1 and Alarm 2 relays are easy to set to default LEL, ppm, VOL levels. The fault relay output properly indicates fault status.

Continuous Self-Test

The detectors check itself continuously if it operates perfectly or not and indicates a fault in case of any failure.

Maintenance via Software

Prosense provides software to maintain your active system easily and calibrate the gas detectors properly via computer.

Applications
  • Process Industry
  • Water Treatment
  • Chemical Industry
  • Food and Medicine Facilities
  • Metal Industry
  • Gas Distribution Stations
  • Laboratories

Specifications P-XY34
Sensor Technology Electrochemical
Output Signal 44-20mA and Modbus RS485 RTU
Sensor Warm-Up Time 60sec
Response Time(T90) <30sec*
Accuracy %ą1
Operating Temperature -40°C ~ +70°C
Humidity 5 ~ 95%RH
Input Min 10VDC - Max 32VDC - Nominal 24VDC
Power Consumption Max. 4W
Optional Relay Outputs 2 Alarms (Selectable) and 1 Fault (All relays are NO/NC adjustable)
Cable Entry 2 x 1/2''NPT
IP Rating IP65 / Optional IP66 (Sensor Head)
Junction Box Epoxy Painted Die-Cast Aluminum
Sensor Head 316L Stainless Steel
Dimensions/Weight 183x118,15x88mm / 1420gr
ATEX Marking II 2G Ex db IIC T5/T4 Gb
Hazardous Class Zone 1 or Zone 2
Certificates IMQ 19 ATEX 045 X
IECEx IMQ 18.0009X
Standards IEC EN 60079-0
IEC EN 60079-1
IEC EN 60079-18
Warranty 12 months from date of shipment from Prosense Technology
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    21 Items found.
PR-KT12
(6978)

PROSENSE  PR-KT12

Prosense 1/2" NPT ATEX Certified Blind Plug for P, PQ and B Series gas detectors



$16.03 
PR-NYY12
(6976)

PROSENSE  PR-NYY12

Prosense 1/2"NPT ATEX Certified Cable Gland for P, PQ and B Series gas detectors



$19.24 
CG2-X-18.0-34
(2114)

BW  CG2-X-18.0-34

BW Calibration Gas mixture Oxygen O2 (18.0%), Balance Nitrogen, 34 Liter steel cylinder.

Configure

 
P-GTA
(7212)

PROSENSE  P-GTA

Prosense Celling Mount Collecting Cone for P and PQ gas detectors, Diameter 50cm, Hight 20cm, Material Steel plate optional stainless steel.

Configure

$96.21 
BW-CG2X18034-EQUIV
(2211)

PORTAGAS  BW-CG2X18034-EQUIV

Calibration Gas Oxygen 18% Balance Nitrogen Size 34 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$104.55 
PK-K30T
(6768)

PROSENSE  PK-K30T

Prosense Teflon Calibration cup/cap for P, PE, PQ and B Series gas detectors, tubing entry 4mm diameter tubing. Optional SS316

Configure

$105.52 
P-ASU-2
(6989)

PROSENSE  P-ASU-2

Prosense flow adapter cell for SH30 and SH20 sensor heads used in PQ, P, PE and PC3 series, gas sampling applications. For 6mm OD Tubing made of corrosion-resistant Teflon.



$127.24 
MSA-479857-EQUIV
(2369)

PORTAGAS  MSA-479857-EQUIV

Calibration Gas Oxygen 20.8% Balance Nitrogen Size 100 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID neck ring)

Configure

$135.15 
90092356
(874)

PORTAGAS  90092356

Calibration Gas Oxygen (O2) 20.8% vol. Balance Nitrogen, 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$135.15 
90096071
(873)

PORTAGAS  90096071

Calibration Gas Oxygen (O2) 18% Balance Nitrogen, 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$135.15 
90095247
(1303)

PORTAGAS  90095247

Calibration Gas Oxygen (O2) 19% vol. Balance Nitrogen, 100 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$135.15 
PROX-EDU
(7017)

PROSENSE  PROX-EDU

Prosense PDM Software 1-Year license for maintenance, setup, calibration, monitoring and troubleshooting of PQ, P, PC3 series gas detectors. Calibration function is licensed separately, to print calibration reports or certificates directly from the program after calibration.

Configure

$172.42 
P-DM-00
(7213)

PROSENSE  P-DM-00

Prosense Duct Mount/Pipe Mount adapter for P and PQ gas detectors, made of Delrin and stainless steel

Configure

 
PQ-PD05A
(7056)

PROSENSE  PQ-PD05A

Prosense Handheld Terminal for maintenance, diagnostics, alarm setting, configuration, test and calibration of Prosense PXN, PXD, PQN, PQD, P and PC3 series gas detectors, uses RS-485 Modbus to connect to the detectors.



$459.80 
SP-P-TB04
(7037)

PROSENSE  SP-P-TB04

Prosense P Transmitter/Main Board for P series gas detectors



$482.79 
1200-0528
(3135)

GDS  1200-0528

GDS Gas Detector Calibration Gas Kit Oxygen (O2) 18%. Balance Nitrogen. Kit includes a 100 Liter Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
S-DPX004
(7030)

PROSENSE  S-DPX004

Prosense S-DPX004 Gas Detector Controller, Alarm Panel for 4 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$806.95 
S-DPX008
(7032)

PROSENSE  S-DPX008

Prosense S-DPX008 Gas Detector Controller, Alarm Panel for 8 x 4-20 mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$941.44 
S-DPX032
(7033)

PROSENSE  S-DPX032

Prosense S-DPX032 Gas Detector Controller, Alarm Panel for 32 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$1,075.93 
S-DPX064
(7034)

PROSENSE  S-DPX064

Prosense S-DPX064 Gas Detector Controller, Alarm Panel for 64 x RS485 MODBUS RTU Detectors + 8 x 4-20 mA Analogue Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66, Marine Bureau Veritas (MED) Certification.

Configure

$2,017.37 
Page: 1 | 2 | All
> OXYGEN :    34 Items found.
C2-X
(4267)

BW  C2-X

BW Clip portable gas detector 2 year maintenance free for Oxygen O2. Low alarm set at 19.5%, High alarm set 23.5%. UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.



$107.97 
70-2900-0502-1
(7305)

AIMSAFETY  70-2900-0502-1

AimSafety PM100 Portable Gas Detector (Two Year Disposable) for Oxygen (O2) 0 - 30% Vol. LCD display. Audible, visual and vibrating alarms. IP67. UL & CSA Class I Div 1, Div 2, ATEX, IECEx, INMETRO.



$120.00 
M015-0003-000
(6334)

MPOWER  M015-0003-000

mPower UNI 321 Disposable Single Gas Detector for detection of Oxygen (O2) 0.1%-30%. 24 months of life. Large LCD display will show time remaining or low/high alarm levels when hit, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.



$141.04 
M001-0032-000
(6005)

MPOWER  M001-0032-000

mPower UNI MP100 Portable Single Gas Detector for detection of Oxygen (O2) 0-25% or 0-30% vol. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$170.28 
BWC2R-X
(5151)

BW  BWC2R-X

BW Clip Real Time portable gas detector with 2 year maintenance free for Oxygen (O2). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

 
SV-6504
(7380)

PROSENSE  SV-6504

Prosense SafeVader SV-6504 Fixed Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25% vol. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.



$366.92 
S1-XL-Y
(6392)

BW  S1-XL-Y

BW Solo Serviceable Single-gas Detector for Oxygen (O2) 0-30% v/v. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

$395.53 
PC3-6524
(6806)

PROSENSE  PC3-6524

Prosense PC3-6524 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25% vol. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$421.40 
OX-6
(4089)

MACURCO  OX-6

MACURCO OX-6 low voltage Gas Detector, Controller and Transducer for Oxygen (O2) 0-25% vol. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$448.50 
OX-12
(4090)

MACURCO  OX-12

MACURCO OX-12 line voltage Gas Detector, controller and transducer for Oxygen (O2) 0-25% vol. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1.

Configure

$483.00 
364-455-01-365-251-11
(6157)

DELPHIAN  364-455-01-365-251-11

Delphian GazTell Fixed Point Electrochemical Gas Detector for Oxygen (O2) 0-21% vol. 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
PXN-6534-1/2
(7331)

PROSENSE  PXN-6534-1/2

Prosense PXN-6534 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$717.29 
SPSTAXO2
(1476)

HONEYWELL  SPSTAXO2

Honeywell Zareba Sensepoint Gas Detector Transmitter for Oxygen (O2) 0-25% VOL complete with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20 mA loop output. ATEX Approved. *** Replaces SPSTAXO1 ***

Configure

$749.41 
PQN-6534-1/2
(6954)

PROSENSE  PQN-6534-1/2

Prosense PQN-6534 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25%. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor and remote display.

Configure

$797.98 
XT-X000-Y-NA
(578)

BW  XT-X000-Y-NA

GasAlertMax XT 4-Gas Detector for O2 (Oxygen). Monitors up to 4 gas hazards for confined space entry and remote sampling.

Configure

 
PXD-6534-1/2
(7330)

PROSENSE  PXD-6534-1/2

Prosense PXD-6534 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKEX or INMETRO approval. IP65, Optional IP66 Adaptor.

Configure

$869.71 
PQD-6534-1/2
(6742)

PROSENSE  PQD-6534-1/2

Prosense PQD-6534 Gas Detector with Electrochemical sensor for Oxygen (O2) with range 0-25%. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$968.34 
GG-O2-C0
(2968)

CALIBRATION TECHNOLOGIES  GG-O2-C0

CTI GasGuard O2 Oxygen Electrochemical Sensor (15-25% or 0-25%) for gas leak detection in food air quality monitoring, refrigeration systems, confined space and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,142.66 
2106B1430
(1468)

HONEYWELL  2106B1430

Honeywell Sieger Sensepoint Gas Detector Transmitter for Oxygen (O2) 25% V/V with Surecell Toxic Sensor. 2 wire 4-20 mA loop output. ATEX/IECEx CSA Class I Div 2 Certified.

Configure

$1,293.77 
1100ALD-109010/30P-L0
(6916)

RC SYSTEMS  1100ALD-109010/30P-L0

RC Systems SenSmart 1100 gas detector for Oxygen (O2) 0-25% with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20 mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1 (Explosion Proof).

Configure

$1,338.96 
Page: 1 | 2 | All
MIRAMAR AUTOMATION LLC       
....

P-6534     $565
PROSENSE / Detectors
Gas Detectors (explosion-proof) / Oxygen
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.