System Sensor P2r | Horn + Beacon | Indoor | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

SYSTEM SENSOR   P2R

SKU# (4148)



SYSTEM SENSOR P2R
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
System Sensor P2R 2-Wire Horn Strobe at 88+ dbA. Standard cd (15, 15/75, 30, 75, 95, 110, and 115 candela settings). Plug-in design. Red housing. 12 or 24 VDC Operation. For celling or wall mounting. cUL, FM and MEA Approved.

FM

P2R   
Please Email us your request for quote   

Options
Surface Mount

   2 Weeks  ]

SpectrAlert ® Advance audible visible notification products are rich with features guaranteed to cut installation times and maximize profits.

FEATURES

  • Plug-in design with minimal intrusion into the back box
  • Tamper-resistant construction
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Field-selectable candela settings on wall units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
  • Horn rated at 88+ dBA at 16 volts
  • Rotary switch for horn tone and three volume selections
  • Universal mounting plate for wall units
  • Mounting plate shorting spring checks wiring continuity before device installation
  • Electrically Compatible with legacy SpectrAlert devices
  • Compatible with MDL3 sync module
  • Listed for ceiling or wall mounting
Agency Listings and Approvals

Consult product manual for lists of compatible UL-Listed devices. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Con- sult factory for latest listing status.

  • UL Listed: S4011
  • ULC Listed: S8971
  • FM Approved
  • CSFM: 7135-1653:175
  • MEA Approved: 492-04-E Vol. 2

The SpectrAlert Advance series offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry. With white and red plastic housings, wall and ceiling mounting options, and plain and FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement.

Like the entire SpectrAlert Advance product line, wall-mount horns, strobes, and horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.

To further simplify installation and protect devices from construction damage, SpectrAlert Advance utilizes a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed.

Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with three volume selections.

Architect/Engineer Specifications
General

SpectrAlert Advance horns, strobes, and horn strobes shall mount to a standard 4 × 4 × 11⁄2-inch back box, 4-inch octagon back box, or double-gang back box. Two-wire products shall also mount to a single-gang 2 × 4 × 17⁄8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.

Also, SpectrAlert Advance products, when used with the Sync•Circuit TM Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.

Horn Strobe Combination

The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non-coded power supply.

Synchronization Module

The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shall mount to a 411⁄16 × 411⁄16 × 21⁄8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply.

Physical/Electrical Specifications
Standard Operating Temperature 32°F to 120°F (0°C to 49°C)
Humidity Range 10 to 93% non-condensing
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR 1
Operating Voltage Range 8 to 17.5V (12V nominal) or 16 to 33 V (24V nominal)
Operating Voltage Range MDL3 Sync Module 8.5 to 17.5V (12V nominal) or 16.5 to 33V (24V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Wall-Mount Dimensions (including lens) 5.6 ̋ L × 4.7 ̋ W × 2.5 ̋ D (142 mm L × 119 mm W × 64 mm D)
Horn Dimensions 5.6 ̋ L × 4.7 ̋ W × 1.3 ̋ D (142 mm L × 119 mm W × 33 mm D)
Wall-Mount Trim Ring Dimensions (sold as a 5 pack) (TR-HS) 5.7 ̋ L × 4.8 ̋ W × 0.35 ̋ D (145 mm L × 122 mm W × 9 mm D)

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> HORN + BEACON :    94 Items found.
D1xC1X10FDC024AB1A1R/A
(4415)

E2S  D1xC1X10FDC024AB1A1R/A

E2S D1xC1X10F Alarm Horn 117dB(A) and 10 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

D1xC1X10RDC024AB1A1R/A
(4416)

E2S  D1xC1X10RDC024AB1A1R/A

E2S D1xC1X10R Radial Alarm Horn 117dB(A) and 10 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

D1xC2X10RDC024AB1A1R/A
(4420)

E2S  D1xC2X10RDC024AB1A1R/A

E2S D1xC2X10R Radial Alarm Horn 118dB(A) and 10 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

D1xC2X10FDC024AB1A1R/A
(4419)

E2S  D1xC2X10FDC024AB1A1R/A

E2S D1xC2X10F Alarm Horn 125dB(A) and 10 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

CU1S_W_024F06RNNNN1BN
(4160)

MEDC  CU1SW024F06RNNNN1BN

MEDC CU1 Combination Unit (Beacon Sounder) with 27 output tones. Weatherproof only version. Up to 116 dB(A), IP66 and 67, intended for use in potentially explosive gas atmospheres. -50C to +50C.

Configure

$1,968.65 
XB13-DB3BWN0481BNNNNN
(6047)

MEDC  XB13-DB3BWN0481BNNNNN

MEDC XB13/DB3B Strobe/Horn Combination Unit mounted on a sturdy, drilled, painted, stainless steel, 2 way baseplate. Heavy Duty Industrial & Marine Xenon 10J. Sounder up to 110dB(A). IP66 and IP67.

Configure

$2,048.30 
D1xC1X05R-024-AA1R/A
(7222)

TOMAR  D1xC1X05R-024-AA1R/A

Tomar Electronics D1xC1X05R Radial Alarm Horn 115dB(A) and 5 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

Configure

$2,168.27 
CU1S_B_024F06RNNNN1BN
(1598)

MEDC  CU1SB024F06RNNNN1BN

MEDC CU1 Combination Unit (Beacon Sounder) with 27 output tones, Zone 1, Zone 2 and non-Ex use, Up to 116 dB(A), IP66 and 67, intended for use in potentially explosive gas atmospheres. -50C to +50C. Available Certifications: ATEX, IECEx, CENELEC, GOST R and K, BASEEFA and Inmetro.

Configure

$2,187.34 
CU1H_B_024F06RNNNN1BN
(4161)

MEDC  CU1HB024F06RNNNN1BN

MEDC CU1 Combination Unit (Beacon Sounder) with 27 output tones, Zone 1, Zone 2 and non-Ex use, Up to 116 dB(A), IP66 and 67, intended for use in potentially explosive gas atmospheres. High Temperature version. -50C to +60C. Available Certifications: ATEX, IECEx, CENELEC, GOST R and K, BASEEFA and Inmetro.

Configure

$2,296.70 
D1xC2X10R-024-AA1R/A
(7223)

TOMAR  D1xC2X10R-024-AA1R/A

Tomar Electronics D1xC2X10R Radial Alarm Horn 115dB(A) and 10 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Div 1, Zone 1 & 20 applications. UL and CSA Approved.

Configure

$2,429.18 
XB12-DB3BWN0481BNNNNN
(1620)

MEDC  XB12-DB3BWN0481BNNNNN

MEDC XB12/DB3B Strobe/Horn Combination Unit mounted on a sturdy, drilled, painted, stainless steel, 2 way baseplate. Heavy Duty Industrial & Marine Xenon 10J. Sounder up to 110dB(A). IP66 and IP67.

Configure

$2,695.40 
SM87HXB+DB3BUL024RR3B
(1619)

MEDC  SM87HXB+DB3BUL024RR3B

MEDC SM87HXB/DB3B Strobe/Horn Combination Unit mounted on a sturdy, drilled, painted, stainless steel, 2 way baseplate. Explosionproof Xenon 5J; Sounder up to 122dB(A). Class I Div 1, IP66 and IP67. LM25. Available certifications: UL.

Configure

$3,291.92 
STEXC1X05FDC012AS2A1R/A
(6455)

E2S  STEXC1X05FDC012AS2A1R/A

E2S STExC1X05F 117dB(A) Alarm Horn & 5 Joule Xenon Strobe Beacon with 1Hz, 1.5Hz and double flash rates. IP66 corrosion proof 316L stainless steel enclosure with guard. 3 x M20 ISO entries. Suitable for For All Zone 1, 2, 21 & 22. IECEx and ATEX Approved.

STEXC1X05RDC012AS2A1R/A
(6456)

E2S  STEXC1X05RDC012AS2A1R/A

E2S STExC1X05R 115dB(A) Radial Alarm Horn & 5 Joule Xenon Strobe Beacon with 1Hz, 1.5Hz and double flash rates. IP66 corrosion proof 316L stainless steel enclosure with guard. 3 x M20 ISO entries. Suitable for For All Zone 1, 2, 21 & 22. IECEx and ATEX Approved.

Page: 1 | 2 | 3 | 4 | 5 | All
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.