Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas

(7250)

DET-TRONICS 006300-012

Det-tronics PIR9400 PointWatch Infrared Hydrocarbon Gas Detector for Methane 0-100% LEL. Diffusion based. 18-30 VDC. 4-20 mA output signal. Explosion proof. IP66. Suitable for Class I Div 1, Div 2, Zone 1 and Zone 2 hazardous areas.

(7260)

DET-TRONICS 012731-504

Det-tronics FlexSight LS2000 Infrared gas detection system for combustible hydrocarbon gases 0-5% LEL. 4-20 mA output, HART and RS-485 Modbus communication. 24 VDC. Stainless steel transmitter and receiver. IP66/IP67. NEMA Type 4X. Suitable for Class I, Div 1 and Div 2; Class II, Div 1; Class I, Zone 1; and Zone 1, Zone 2. FM, IEC and SIL 2 Approvals.

(7156)

RC SYSTEMS 10-1025-01P

RC Systems 10-1025 Gen II EC Smart Sensor for Series 4100, 5000, 6000 Gas Detectors, Ozone (O3) up to 2ppm (0-1, 0-2)ppm

Configure

$959.63

(7100)

RC SYSTEMS 10-9025-1P

RC Systems 10-9025/10-9521 Gen I EC Smart Sensor for Series 1000, 2000, 3000 Gas Detectors with ST-48 transmitter, Ozone (O3) up to 2ppm (0-1, 0-2)ppm

Configure

$1,149.91

(6922)

RC SYSTEMS 1100ALD-109025/1P-L0

RC Systems SenSmart 1100 gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20 mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$1,957.14

(2536)

FHF 11286101

FHF ExResistTel explosion proof, weatherproof and industrial Telephone. Handsfree. Certified for dust and gas atmospheres. IP66 (EN 60529).

Configure

(2537)

FHF 11286102

FHF ExResistTel ZB explosion proof, weatherproof and industrial Telephone (Without keypad). Handsfree. Certified for dust and gas atmospheres. IP66 (EN 60529).

Configure

(2541)

FHF 11286180

FHF ExResistTel IP2 Explosionproof VoIP Telephone for indoor and outdoor use in zone 1. Black. Pixel-based illuminated LCD Display. V4A keypad. Standard H.323, SIP, TSIP, SIPS protocols. Connection to 10/100-BASE-T Ethernet LAN. RJ45. IP66 (IEC60529). *** Phased Out ***

(4093)

FHF 11286201

FHF Ex-Telephone ResistTel with blind plugs for metal cable gland M20 x 1.5, explosion proof, weatherproof and industrial Telephone. Handsfree. Certified for dust and gas atmospheres. IP66 (EN 60529).

Configure

(7230)

AUTRONICA 116-014048-232

Autronica AutroPoint HC200 Infrared IR Hydrocarbon Gas Detector calibrated to methane, propane, ethylene, or butane 0 to 100% LEL. Explosion-proof stainless steel housing. 4-20 mA signal with HART communication. MODBUS and ASCII supported. SIL2, FM/CSA, DEMKO, IECEx and ATEX certified for use in Class I, Div 1 and Div 2, and Zone 1 and Zone 2.

(133)

RC SYSTEMS 2100AL-0-9025/1P/L0

RC Systems SenSmart 2100 2 wire 4-20 mA Loop Powered gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output. 10-30 VDC. Stainless steel or aluminum enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$2,432.47

(1687)

HONEYWELL 2110B2103

Remote Sensor Junction Box-UL Class I, Div 1, Groups B, C, & D & Class I, Zone 1 / CSA Class I, Groups B, C, & D for Honeywell Sieger Apex Detector **** Phased out product **** **** Phased out product ****

(6923)

RC SYSTEMS 31001AL-0-9025/1P/L1-ARC

RC Systems SenSmart 3100 3 wire gas detector for Ozone (O3) 0-1 ppm or 0-2ppm with Electrochemical sensor 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive), with 4 Watt internal heater, local mount with Splash Guard.

Configure

$2,610.39

(894)

SPECTREX 40/40I-111AC

SPECTREX SharpEye 40/40I Triple IR (IR3) Flame Detector multi spectrum based on three IR bands (IR3), detects fuel and gas fires at long distances with the highest immunity to false alarms. Can detect several fuels, a 1ft2 (0.1m2) gasoline pan fire at 215 ft (65m) in less than 5 seconds. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Automatic and Manual Built-In-Test (BIT) feature included. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-I ***

(901)

SPECTREX 40/40L-111AC

SPECTREX SharpEye 40/40L Flame Detector with UV (ultraviolet) and IR(infrared) (2.5-3.0 um) sensor for hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, metal and inorganic fires. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Built-in-test (BIT) optional. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-LB ***

(904)

SPECTREX 40/40L4-111AC

SPECTREX SharpEye 40/40L4 Flame Detector with UV and IR (4.5 um) sensor for hydrocarbon-based fuel and gas fires. Fast Response (200 msec) to flash fire 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Built-in-test (BIT) optional. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-L4B ***

(1446)

SPECTREX 40/40R-111AC

SPECTREX SharpEye 40/40R single IR Flame Detector detects hydrocarbon-based fuel and gas fires, provides early warning of flaming fires working at 4.4 um for maximum sensitivity, and immunity to false alarms from IR sources such as sunlight and IR projectors. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Self test feature included. Automatic and Manual Built-In-Test (BIT) feature included. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40C-I ***

(1501)

SPECTREX 40/40U-111AF

SPECTREX SharpEye 40/40U UV-Based Fast Response Flame Detector detects hydrocarbon-based fuel and gas fires, invisible hydrogen flames, and fires from hydrides, ammonia, silane and other organics, 200 msec response to flash fire. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. SIL2 (TUV) approved to IEC 61508. Built-in-test (BIT) optional. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out ***

(5026)

SPECTREX 40/40UFI-111AC

SPECTREX SharpEye 40/40UFI Ultra Fast Triple IR (IR3) multi spectrum Flame Detector. Detects hydrocarbon fuel and gas fires at long distances with the highest immunity to false alarms. Include a heated window to eliminate condensation and icing, HART capability, Automatic Built-In-Test (BIT), 3 Relays for Alarm, Fault and auxiliary and RS-485 Modbus output. IP66 and IP67. ATEX, IECEx, FM, CSA and SIL2 Approved. Capable for Zones 1, 2, 21 & 22. *** Phased Out replaced by 40/40D-I ***

(2930)

SPECTREX 40/40UFL-111AF

SPECTREX SharpEye 40/40UFL UV-IR High-Speed Optical Flame Detector for hydrocarbon-based fuel and gas fires. High-Speed Response (20 msec) to flash fire and High Reliability and immunity to false alarm, design based on military specifications. 2 Relays (Alarm and Fault), 0-20mA stepped and analogue output for fast detection. Compatible with RS-485 Modbus. Automatic and Manual Built-In-Test (BIT) feature included. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. EN54-10 (VdS Germany) approved. 5 year warranty and is SIL2 (TUV) approved to IEC 61508 *** Phased Out replaced by 40/40D-LB ***

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400. Powered by: