E2s D2xb1ld2dc024mn0h1r/c | Beacons | Class I Div 2 And Class Ii Div 2 | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

E2S   D2xB1LD2DC024MN0H1R/C

SKU# (6409)



E2S D2xB1LD2DC024MN0H1R/C

ALARM SIGNAL DEVICES / CLASS I DIV 2 AND CLASS II DIV 2
BEACONS

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
E2S D2xB1LD2-H Haz Loc auto-synchronizing LED Light/Beacon tested to UL1971. Up to 180cd. 24vdc. Three flashing modes. 2 × 1/2” NPT, 2 x M20x1.5, 1 × 3/4” NPT entries. IP66. UL/cUL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

D2xB1LD2DC024MN0H1R/C   
Please Email us your request for quote   

Stopping plug/adaptor material

  [  2 Weeks  ]
3 Variants of base SKU

The haz loc D2xB1LD2-H is an auto-synchronizing LED light/beacon tested to UL1971 suitable for public mode fire alarm, ADA compliant, hearing impaired applications. UL1971 effective candela rating of 38.38cd.

The D2x1BLD2-H utilizes an array of high power Cree® LED’s, orientated to optimize visibility in any direction. Multiple D2xB1LD2-H units will auto-synchronize when powered from the same power source removing the need for any additional sync modules on the circuit. The D2xB1LD2-H contains a supervisory diode and duplicated pluggable terminals that not only simplify installation but also enable a 4 wire connection. The unit is UL/cUL approved for Class I Div 2, Class II Div 2, Class I Zone 2/22 as well as IECEx and ATEX certified for Zone 2 and 22 hazardous area applications.

Features
  • Public mode fire use UL1971 & CAN/ULC-S526
  • Synchronized for over 2 hours per UL1971
  • 38.38 eff. candela – UL1971 Public mode fire
  • 180 eff. candela – UL1638 general signaling
  • Ultra low operating current of 99.5mA
  • In rush limiting circuit <2A
  • Choice of three flash rates: 1Hz, 1.3Hz, 2Hz
  • Marine grade aluminum enclosure
  • Ingress protection Type 4/4X/3R/13, IP66
  • High impact resistant Borosilicate glass lens
  • Duplicate, pluggable cable terminations
  • Conduit mounting via integral 3/4" NPT entry
  • Surface mounting via user installed lugs
  • Dual 1/2"NPT and dual M20 entries
  • Supplied with haz loc rated stopping plugs
  • Compact footprint
Approvals
  • UL/cUL File ref: E245313
  • IECEx certficate: IECEx ULD 14.0004X
  • ATEX certificate: DEMKO 14 ATEX 4786493904X
  • CSFM listing: 7300-2279:0500
Coding
  • NEC / CEC:
    Class I Div 2 ABCD T4 Ta -40°C to +50°C
    Class I Div 2 ABCD T4A Ta -40°C to +40°C
    Class II Div 2 EFG T6 Ta -40°C to +50°C
    Class III Div 1&2 Ta -40°C to +50°C
  • NEC:
    Class I Zone 2 AEx nA IIC T4 Gc (Ta -40°C to +50°C)
    Zone 22 AEx tc IIIC 75°C Dc (Ta -40°C to +50°C)
  • CEC:
    Class I Zone 2 Ex nA IIC T4 Gc X (Ta -40°C to +50°C)
    Zone 22 Ex tc IIIC 75°C Dc (Ta -40°C to +50°C)
  • IECEx & ATEX:
    II 3G Ex nA IIC T4 Gc (Ta -40°C to +50°C)
    II 3D Ex tc IIIC 75°C Dc (Ta -40°C to +50°C)

Specification
Source:Array of 4 x High Power Cree® LED’s
Modes:1Hz flash (60 fpm)
1.3Hz flash (80 fpm)
2Hz flash (120 fpm
Eff. Intensity cd:38.38 cd UL1971 Public mode fire
180 cd UL1638 General signaling
Peak Intensity cd:300,000 cd
LED life:>60,000 hours
Synchronization:Flash rates synchronize for a minimum of 2 hours per UL1971
Voltage:24V dc (16-33V dc)
In-rush:1.88A for 2ms
Ingress protection:IP rating per EN60529:IP66
Type rating per UL50E/NEMA250:4/4X/3R/13
Enclosure materialMarine grade LM6 aluminum alloy
Enclosure colour:Red (RAL3000)
Lens material:Borosilicate glass
Cable entries:2 x M20x1.5, 2 × 1/2"NPT, 1 × 3/4"NPT
Stopping plugs:Nickel Plated Brass plugs included
Ground/Earth stud:M5
Terminals:0.5 – 2.5mm2 (20-14 AWG)
Line monitoring:Blocking diode included EOL can be factory fitted
Operating temp:-40 to +50°C [-40° to +122°F]
Storage temp:-40 to +70°C [-40° to +158°F]
Relative humidity:95%
Weight:DC: 1.5kg/3.31Ibs
Export Info
Made inUnited Kingdom
Harmonized Tariff Code (HTC)85311095

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> BEACONS :    114 Items found.
B400FLF012B/A
(3575)

E2S  B400FLF012B/A

E2S B400FLF Blinking Beacon with 40W filament bulb. Surface mount. Bayonet fixing lens. Stainless steel fixings. 12VDC, 24VDC, 48VDC, 24VAC, 115VAC or 230VAC Versions. IP65. GOST-R Cerfified.

Configure

 
B400FLH012B/A
(3576)

E2S  B400FLH012B/A

E2S B400FLH Blinking Beacon with 35/40W halogen bulb. Surface mount. Bayonet fixing lens. Stainless steel fixings. IP65. 12VDC, 24VDC, 115VAC or 230VAC Versions. GOST-R Cerfified.

Configure

 
B400RTH012B/A
(3579)

E2S  B400RTH012B/A

E2S B400RTH Rotating Beacon with 35/40W halogen bulb. Provides 1204 Candelas of light output. Surface mount. Bayonet fixing lens. Stainless steel fixings. 12VDC, 24VDC, 48VDC, 115VAC or 230VAC Versions. IP65. GOST-R Cerfified.

Configure

 
B350TLA030B/A
(3582)

E2S  B350TLA030B/A

E2S B350TLA LED Traffic Light. Compact housing. Surface mount. Bayonet fixing lens. Stainless steel fixings. IP65. GOST-R Cerfified.

Configure

 
B450TLA030B/A
(3585)

E2S  B450TLA030B/A

E2S B450TLA LED Traffic Light. Surface mount. Bayonet fixing lens. Stainless steel fixings. 10-30VDC or 90-230VAC Versions. IP65. GOST-R Cerfified.

Configure

 
B300LDA050B/A
(3570)

E2S  B300LDA050B/A

E2S B300LDA Multifunction Array LED Beacon with 9 user selectable operation modes. Surface mount. Bayonet fixing lens. Stainless steel fixings. 10-50VDC or 90-230VAC Versions. IP65. GOST-R Cerfified.

Configure

 
IS-PB1-A
(3693)

E2S  IS-PB1-A

E2S IS-pB1 compact Panel Mount LED Indicator. 14-30VDC. Provides reliable cost-effective visual status indication in all hazardous areas. Nylon 6 housing and Polycarbonate lens. IP66. ATEX, IECEx and FM approved.

Configure

 
L101FLASHTELR/R
(3550)

E2S  L101FLASHTELR/R

E2S L101FLASHTEL Telephone Initiated 5 Joule Xenon Beacon. 196cd candela output. 230VAC. IP66. GOST-R approved.

Configure

 
B400STR024B/A
(3577)

E2S  B400STR024B/A

E2S B400STR Xenon Strobe Beacon with 1Hz flash rate. Surface mount. Bayonet fixing lens. Stainless steel fixings. 24VDC/AC, 48VDC/AC, 115VAC or 230VAC Versions. IP65. GOST-R Cerfified.

Configure

 
IS-MB1-R/A
(3690)

E2S  IS-MB1-R/A

E2S IS-mB1 IS-minialite compact LED Beacon. 16-28VDC. Stainless Steel fixings. IP65. ATEX, IECEx and GOST-R approved for Zone 0. FM approved for Class 1 Div 1 and Class I Zone 0.

Configure

 
MB005AC115G-AM
(3632)

E2S  MB005AC115G-AM

E2S MB005 5 Joule Xenon Strobe Beacon with 1Hz flash rate suitable for harsh environments. Robust, fire retardant, IP66 & IP67 housing. Stainless Steel guard and fixings. 12VDC, 24VDC, 48VDC, 115 VAC or 230VAC Versions. GOST-R Approved.

Configure

 
B400LDA050B/A
(3578)

E2S  B400LDA050B/A

E2S B400LDA Multifunction Array LED Beacon with 9 user selectable operation modes. Surface mount. Bayonet fixing lens. Stainless steel fixings. IP65. GOST-R Cerfified.

Configure

 
MB010AC115G-AM
(3633)

E2S  MB010AC115G-AM

E2S MB010 10 Joule Xenon Strobe Beacon with 1Hz flash rate suitable for harsh environments. Robust, fire retardant, IP66 & IP67 housing. Stainless Steel guard and fixings. 12VDC, 24VDC, 48VDC, 115 VAC or 230VAC Versions. GOST-R Approved.

Configure

 
MBL1AC024G-AM
(3634)

E2S  MBL1AC024G-AM

E2S MBL1 Multi-funtion LED Beacon with 9 user selectable operation modes. Robust, fire retardant, IP66 & IP67 housing. Suitable for harsh environments. Stainless Steel guard and fixings. 10-50VDC, 24VAC, 115 VAC or 230VAC Versions. GOST-R Approved.

Configure

 
IS-L101L-R/R
(3688)

E2S  IS-L101L-R/R

E2S IS-L101L LED Beacon. Provides a bright flashing warning signal. 16-28VDC. Stainless Steel fixings. IP66. ATEX, IECEx and GOST-R approved for Zone 0. FM approved for Class 1 Div 1 and Class I Zone 0.

Configure

 
XB13012RNNNNR
(1584)

MEDC  XB13012RNNNNR

MEDC XB13 Xenon beacon (10 Joules), Harsh Industrial & Marine Environments, Weatherproof, IP66 and IP67, designed withhigh ingress protection to cope with harsh environmental conditions, –40°C to +70°C.

Configure

$432.58 
MCB00505AC115G-AM/AM
(3635)

E2S  MCB00505AC115G-AM/AM

E2S MCB005-05 Dual 5 Joule Xenon Strobe Beacon with 1Hz flash rate suitable for harsh environments. Robust, fire retardant, IP66 & IP67 housing. Stainless Steel guard and fixings. 24VDC, 115 VAC or 230VAC Versions. GOST-R Approved.

Configure

 
D2xB1LD2DC024CN1A1R/C
(6408)

E2S  D2xB1LD2DC024CN1A1R/C

E2S D2xB1LD2 Haz Loc LED Beacon Warning Light tested to UL1638. Up to 180cd. Five flashing modes. Dual 1/2"NPT and dual M20 side entries. IP66. UL/cUL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

Configure

 
D2xB1X05DC024MN1A1R/C
(6412)

E2S  D2xB1X05DC024MN1A1R/C

E2S D2xB1X05 Haz Loc 5 Joule Xenon Strobe Beacon tested to UL1638. Up to 250cd. 2 x M20x1.5, 2 × 1/2"NPT, 1 × 3/4"NPT entries. IP66. UL/cUL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

Configure

 
D2xB1X10DC024MN1A1R/C
(6413)

E2S  D2xB1X10DC024MN1A1R/C

E2S D2xB1X10 Haz Loc 10 Joule Xenon Strobe Warning Light tested to UL1638. Up to 500cd. 2 x M20x1.5, 2 × 1/2"NPT, 1 × 3/4"NPT entries. IP66. UL/cUL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

Configure

 
Page: 1 | 2 | 3 | 4 | 5 | 6 | All
() Reviews | Write One      
....

D2xB1LD2DC024MN0H1
E2S / Alarm Signal Devices
Class I Div 2 And Class Ii Div 2 / Beacons
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.