Kwiksense Ks1000u2-ssa0082a | Ammonia | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

KWIKSENSE   KS1000U2-SSA0082A

SKU# (7604)



KWIKSENSE KS1000U2-SSA0082A

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
AMMONIA

$1,957.00  [4 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Uniphos KwikSense Pro Smart Gas Detector with Electrochemical Sensor for Ammonia (NH3) 0-100 ppm or 0-1000 ppm. Includes 4-20 mA, MODBUS RS-485 and HART outputs, 3 Alarm relays, Aluminum Enclosure. ATEX/IECEx/SIL2 Approved. IP66.

4-20 mA   RELAYS   ATEX   IECEX   SIL2   HART   MODBUS

KS1000U2-SSA0082A   
1,957.00

Enclosure
Cable Entry
Range

  [  4 Weeks  ]
8 Variants of base SKU
Description

The KwikSense Pro smart digital gas transmitter is a field mountable gas detector suitable for the detection and continuous monitoring of hazardous gases in industrial plants.

A truly universal transmitter, it is compatible with any one of our more than 100 smart gas sensors, which include oxygen, toxic gases, combustible gases and volatile organic compounds (VOCs).

  • Digital Communication on MODBUS over RS-485 / HART over 4-20mA
  • Industry standard 4-20mA analog output
  • 3 potential free relay contacts
  • Pre-Calibrated Smart Sensor capable of swapping between any sensor technology
  • Sensor Technologies Available
    • Electrochemical
    • Pellistor
    • Solid State
    • NDIR
    • PID
    • MPS
  • Non-intrusive Calibration
  • Bright OLED display
KwikSense Lite Digital Gas Transmitter

The Uniphos KwikSense Lite Transmitter offers users a low-cost solution to their gas monitoring needs.

The KwikSense Lite comes with a single gas swappable sensor facility and a single potential free relay contact for alarm.

MED certification is applicable for Oxygen and Flammable gases.

Specifications
  • Swappable Smart Sensor for single gas
  • Sensor Technologies available: EC, PEL, NDIR, PID & SS
  • Industrial standard 4-20 mA output
  • Tri-color LEDs indicate alarm
KwikSense RD Remote Display

The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location.

This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required.

It can act as a controller or as a bridge between the detector and controller.

Specifications
  • Configuration via non-intrusive magnetic wand
  • It accepts industry standard 4-20mA input available from detector and provides RS-485 MODBUS and 4-20mA output to connect with the controller
  • Tri-color LEDs have been provided to signal the alarm condition
Certifications: KwikSense Pro
  • ATEX certified by SGS BASEEFA
    II 2 G Ex db IIC T6 Gb (Tamb = -40°C to +55°C)
    Ex db IIC T5 Gb (Tamb = -40°C to +70°C)
    Ex db IIC T4 Gb (Tamb = -40°C to +85°C)
    - Not applicable with remote sensor option
  • IECEx Certified Certificate No: IECEx BAS 14.0148X
    Ex db IIC T6 Gb (Tamb = -40°C to +55°C)
    Ex db IIC T5 Gb (Tamb = -40°C to +70°C)
    Ex db IIC T4 Gb (Tamb = -40°C to +85°C)
  • SIL-2 Certified
  • HART Registered

General Specifications
Sensor Technology: EC, PEL, NDIR, PID, SS, MPS
Operating Voltage: 18V to 30 VDC
System Type: ĩController based instrument (non intrusive calibration)
Display: 8 x 2 OLED Display
Sampling Type: Diffusion
Sensor: Swappable Smart Sensor
LEDs: Tri-color LED
Alarms: Two user settable alarms
Output: 4-20mA, MODBUS over RS-485, HART over 4-20 mA
Relays: 3 potential-free contacts
Load Resistance: 600 Ω (max)
Power Consumption: < 3 W
Enclosure: Flameproof Cast Aluminium alloy
Ingress Protection: IP 66
Dimensions (mm): Approx. 155 x 145 x 100 (WO cable gland & stopper)
Wire Configuration: 3/4 wires
Interface: Calibration & configuration via non-intrusive magnetic wand
Operating Temperature: -40°C to +65°C (depend on sensor)
Operating Pressure: Ambient + 10%
Operating Humidity: 0-95% RH (Extended exposure to extreme humid conditions may degrade sensor performance)
Cable Entries: ―” NPT (M20) - 2 entries / ū” NPT (M25) - 2 entries
Certifications: ATEX, IECEx, SIL2, CE, HART
Weight: 2.3 kg (Approx.)
Export Info
Made inIndia
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping & Handling

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    6 Items found.
(7605)

KWIKSENSE  ER003605

Kwiksense Splash Guard/Rain Shield for KwikSense Pro



$101.01 
ER004028
(7606)

KWIKSENSE  ER004028

Kwiksense Gas Collection Cone for KwikSense Pro



$143.78 
ER004752
(7609)

KWIKSENSE  ER004752

Kwiksense Pipe Mounting Kits for KwikSense Pro



$185.64 
(7608)

KWIKSENSE  ER001008

Kwiksense Canopy (Metallic or FRP) for KwikSense Pro

Configure

$185.64 
EF001557
(7610)

KWIKSENSE  EF001557

Kwiksense Flow Through Adapter (Flow Cell) for KwikSense Pro



$242.97 
ER004091
(7607)

KWIKSENSE  ER004091

Kwiksense Duct Mounting Kit for KwikSense Pro



$414.96 
> AMMONIA :    49 Items found.
M001-0006-000
(5993)

MPOWER  M001-0006-000

mPower UNI MP100 Portable Single Gas Detector for detection of Ammonia (NH3) 0-100ppm or 0-500ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class ... more

Configure

$368.08 
70-2900-0503-1
(7306)

AIMSAFETY  70-2900-0503-1

AimSafety PM100 Portable Gas Detector (Two Year Disposable) for Ammonia (NH3) 0-100 ppm. LCD display. Audible, visual and vibrating alarms. IP67. UL & CSA Class I Div 1, Div 2, ATEX, IECEx, INMETRO.



$456.00 
S1-A_-Y
(6382)

BW  S1-A-Y

BW Solo Serviceable Single-gas Detector for Ammonia (NH3) 0-100 ppm or 0-1000ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div ... more

Configure

 
364-455-01-365-761-11050
(6149)

DELPHIAN  364-455-01-365-761-11050

Delphian GazTell Fixed Point Electrochemical Gas Detector for Ammonia (NH3) 0-50 or 0-100 ppm. 4-20 mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
SV-4804
(7377)

PROSENSE  SV-4804

Prosense SafeVader SV-4804 Fixed Gas Detector with Electrochemical sensor for Ammonia (NH3) with range 0-50 ppm to 0-1000 ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.

Configure

$886.65 
PC3-4824
(6803)

PROSENSE  PC3-4824

Prosense PC3-4824 Gas Detector with Electrochemical sensor for Ammonia (NH3) with range 0-100 ppm or 0-1000 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone ... more

Configure

$1,003.96 
LBW-WATCHMAN-SS
(4486)

COOL AIR  LBW-WATCHMAN-SS

Cool Air LBW-Watchman Ammonia (NH3) 0-1000ppm Leak Detector. Display, 4-20 mA analog output. NEMA 4X, UL Listed enclosure. IP66. 24VDC.

Configure

$1,115.20 
P-4834
(6778)

PROSENSE  P-4834

Prosense P-4834 Gas Detector with Electrochemical sensor for Ammonia (NH3) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone ... more

Configure

$1,133.50 
LBW-50-1-SS
(910)

COOL AIR  LBW-50-1-SS

Cool Air LBW-50 Ammonia (NH3) 0-1000ppm Gas Leak Detector. NEMA 4X IP66 enclosure. Alarm, pre-alarm and auxiliary relays. 115 or 230 VAC, 50/60 Hz, 16 VAC, or 24 VDC

Configure

$1,230.00 
SPSTAXA1
(1486)

HONEYWELL  SPSTAXA1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Ammonia (NH3) with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20 ... more

Configure

$1,235.01 
PXN-4834-1/2
(7478)

PROSENSE  PXN-4834-1/2

Prosense PXN-4834 Gas Detector with Electrochemical sensor for Ammonia (NH3) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. ATEX/IECEx (Zone 1, Zone ... more

Configure

$1,296.00 
100-0008-00-SS-2-2/100-0015-E-NH3
(4759)

ESP SAFETY  100-0008-00-SS-2-2/100-0015-E-NH3

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Ammonia (NH3) 0-100ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire ... more

Configure

 
1100ALD-109012/0300P-L0
(6908)

RC SYSTEMS  1100ALD-109012/0300P-L0

RC Systems SenSmart 1100 gas detector for Ammonia (NH3) 0-300 ppm to 0-1000 ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20 mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class I Div 2 (Non-Incendive).

Configure

$1,394.80 
LBW-50_-RLV
(914)

COOL AIR  LBW-50-RLV

Cool Air Ammonia Relief Line Vent Gas Detector LBW-RLV for continuos monitoring of Ammonia (NH3) 25-800ppm refrigeration gas emergency vent line headers. NEMA 4 weatherproof enclosure. 2 Alarm and 1 Auxiliary relays, 2 wires for power. 4 wires for control ... more

Configure

$1,426.80 
PQN-4834-1/2
(6920)

PROSENSE  PQN-4834-1/2

Prosense PQN-4834 Gas Detector with Electrochemical sensor for Ammonia (NH3) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Marine Bureau Veritas Certification (MED), Alarm Relay card. ... more

Configure

$1,435.77 
GG-NH3-0100
(2966)

CALIBRATION TECHNOLOGIES  GG-NH3-0100

CTI GasGuard NH3 Ammonia Electrochemical Sensor (0-100, 0-250, 0-500 or 0-1000 ppm) for gas leak detection in food processing areas, cold storage, compressor rooms and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,455.97 
PXD-4834-1/2
(7477)

PROSENSE  PXD-4834-1/2

Prosense PXD-4834 Gas Detector with Electrochemical sensor for Ammonia (NH3) with range 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Optional Relay and HART card. LCD Display. ATEX/IECEx (Zone ... more

Configure

$1,479.60 
GG-NH3-2
(2967)

CALIBRATION TECHNOLOGIES  GG-NH3-2

CTI GasGuard NH3-2% Ammonia Catalytic Bead Sensor 0-2% (up to 20000 ppm) for gas leak detection in compressor rooms, emergency shutdown, E-stop, heat treatment and others. No false alarms. 4-20 mA output, 24VDC power supply and NEMA 4X polycarbonate enclosure.

Configure

$1,505.44 
2106B1413
(1458)

HONEYWELL  2106B1413

Honeywell Sieger Sensepoint Gas Detector Transmitter for Ammonia (NH3) (0-50 ppm to 0-1000 ppm) with Surecell Toxic Sensor. 2 wire 4-20 mA loop output. ATEX/IECEx CSA Class I Div 2 Certified.

Configure

$1,521.63 
GG-VL2-NH3
(2970)

CALIBRATION TECHNOLOGIES  GG-VL2-NH3

CTI GasGuard NH3 Ammonia Vent Line 0-1% (0-10000 ppm) for gas leak detection in refrigeration system relief valves (outdoor installations only). 4-20 mA output, 24VDC power supply and NEMA 4X stainless enclosure.

Configure

$1,592.74 
Page: 1 | 2 | 3 | All
MIRAMAR AUTOMATION LLC       
....

KS1000U2-SSA0082A     $1,957
KWIKSENSE / Detectors
Gas Detectors (explosion-proof) / Ammonia
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.