General
NOTIFIER’s XP6-R six-relay control module provides an
intelligent fire alarm system with six Form-C relays.
The first module is addressed from 01 to 154 while the
remaining modules are automatically assigned to the next
five higher addresses. Provisions are included for disabling a
maximum of three unused modules. A single isolated set of
dry relay contacts is provided for each module address,
which is capable of being wired for either a normally-open or
normally-closed operation. The module allows the control
panel to switch these contacts on command. No supervision
is provided for the controlled circuit.
Each XP6-R module has panel-controlled green LED indica-
tors. The panel can cause the LEDs to blink, latch on, or latch
off.
Features
- Six addressable Form-C relay contacts
- Removable 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²) plug-in terminal blocks
- Status indicators for each point
- Unused addresses may be disabled
- Rotary address switches
- FlashScan® or CLIP operation
- Mount one or two modules in a BB-XP cabinet (optional)
- Mount up to six modules on a CHS-6 chassis in a CAB-3 Series, CAB-4 Series, EQ Series, or BB-25 cabinet (optional)
- Mounting hardware included
Agency Listings and Approvals
These listings and approvals apply to the modules specified
in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
- UL Listed: S635
- ULC Listed: S635 (XP6-RA).
- MEA Listed: 368-01-E
- CSFM: 7300-0028:0219
- Maryland State Fire Marshal: Permit # 2106
- FM Approved: (Light Protective Signaling Only)