Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (6731)

FIRERAY  16519-20

DETECTORS / FLAME DETECTORS
TRIPLE IR

$1,759.20     Availability: 11 Weeks
 Info/Quote Request
 Shipping Rates
 Volume discount



FIRERAY 16519-20
  • Overview
  • Features
  • Specs
  • ACCESSORIES & RELATED
  • Literature

Fireray Talentum 16519-20 Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Part# with Options:        16519-20
Price with Options:        1,759.20

Options:    

Mounting Bracket
(1) Mounting Bracket for Fireray Talentum
Weather Shield
(2) Weather Shield for Fireray Talentum (Exd)

  Availability [  11 Weeks  ]

The Talentum ® flameproof triple Infra-Red (IR3) Flame Detector is designed to protect hazardous areas where open fires may be expected and detects almost all flames, including hydrocarbon fires with 4.3μm emissions through to invisible fires such as hydrogen.

The IR3 Flame Detector is sensitive to flickering, low frequency (1- 15Hz) infra-red radiation emitted by flames during combustion even if the lens is contaminated by a layer of oil, dust, water, vapour or ice.

This detector has three IR sensors which respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms from flickering sunlight are avoided by a combination of filters and signal processing techniques.

The Talentum IR detector has selectable output options of relay contacts or 4-20mA signal, as standard.

Features
  • Excellent immunity to false sources
  • Tolerant of fumes, vapours, dust and mist
  • Suitable for indoor and outdoor areas
  • Unaffected by convection currents, draughts or wind
  • Proven response to multiple fuel types
  • Multi-spectrum detection
  • Selectable output options
  • Selectable response speed
  • Selectable sensitivity levels
  • Built in auto and manual test
  • Low current consumption
  • Fast response to fire
Applications
  • Chemical Plants
  • Refineries
  • Waste Recycling
  • Fuel Loading Racks
  • Nuclear Power Sites
  • Storage Tanks
  • Engine Rooms
  • Aircraft Hangars
  • Spray Booths
  • Petrochemical Offshore/Onshore
  • Pharmaceutical Production
  • Biomass Storage and Handling
  • Military Applications
  • LNG/LPG Production
  • Marine Industry
  • Coal Handling
  • Printing

Mechanical Specification
Housing Material Copper Free Aluminium Alloy
Housing Colour Red
Dimensions 5.91"H x 5.75"W x 5.39"D
(150 H x 146 W x 137 D mm)
Weight 5.51lbs (2.5kg)
Cable Gland Entries 3 x 0.79" (3 x 20 mm)
Wiring 1.0 to 4.0mm2
Electrical Specification
Supply Voltage 14 to 30Vdc
Quiescent Current 8mA, RL2 energised
4mA, current loop, RL2 off
3mA, RL2 off
Alarm Current 28mA, RL1 & RL2 energised
20mA, current loop, RL1 & 2 off
9mA, RL1 energised
Power Up Time 2 seconds max.
Test Signal Voltage 14 to 30Vdc
Relay Outputs
- Programmable
- Ratings: Current
Voltage
Power		 Normally Open or Normally Closed
Latching or Non-latching
1.0A Max.
50Vdc Max.
30W Max. (Note: Resistive Loads Only)
Environmental
Operating Temperature -20°C to +60°C
Storage Temperature -20°C to +125°C
Relative Humidity 95% Non condensing
IP Rating I IP66
Performance
Range - Class 1*
- Class 3		 0.1m2 n-heptane at 25m
0.1m2 n-heptane at 12m (see EN54:10 for sensitivity settings)
Field of View 90° min. Cone
Operating Wavelength Band - IR 0.75 to 2.7μm
Approvals
FM Approved Cert. No. 3059453
CPR 0832-CPR-F0578
LPCB 1204a/06
VdS G212189
SIL 2 C127_CT003_(2.0)
Baseefa ATEX Baseefa08ATEX0270
Baseefa IECEx IECEx BAS 08.0073

  • FLAME DETECTORS > TRIPLE IR
    16219-20 Fireray Talentum 16219-20 Flameproof (Exd) IR3 Flame Detector for High Ambient Temperature. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx app ..

  • FLAME DETECTORS > TRIPLE IR
    16549-20 Fireray Talentum 16549-20 Stainless Steel Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66. ..

  • FLAME DETECTORS > TRIPLE IR
    16589-20 Fireray Talentum 16589-20 IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66. ..

  • FLAME DETECTORS > ULTRAVIOLET/INFRARED
    16591-20 Fireray Talentum 16591-20 UV/IR2 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation along with ultra-violet. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66. ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> TRIPLE IR :    9 Items found.
20/20MPI-R
(2940)

SPECTREX  20/20MPI-R

SPECTREX Sharp Eye 20/20MPI IR3 Flame Detector for indoor applications. Low cost, High Performance, High Reliability and Long Distance for hydrocarbon-based fuel and gas fires. Polycarbonate housing. 2 Relays (Alarm and Fault) OR 0-20mA output and compatible with RS-485 Modbus. IP55. Includes Tilt mount and protective cover. Automatic and Manual Built-In-Test (BIT), indoor use. Available Approvals: FM3260 and EN54-10 (Pending).

Configure

$1,464.61 
100-0017-01
(4720)

ESP SAFETY  100-0017-01

ESP Safety IPES-IR3 Infrared Flame Detector for detection of combustible vapors gases fires. Rapid flame recognition and alarm signaling. Sends an alarm only when data from 3 different IR wavelengths detects a flame. RS-485, Modbus RTU, 4-20mA and relay outputs. Tri-Color status LED. Explosion-proof Housing. IP66. Designed for Class I, Division 1, Group B, C & D. SIL3 Rated. Includes protective visor, stainless steel mounting bracket and hardware.

Configure

$1,805.25 
FSL100-IR3
(6772)

HONEYWELL  FSL100-IR3

Honeywell FSL100-IR3 Flame Detector for robust, fast, and reliable detection of liquid hydrocarbon and dirty fires in indoor/outdoor environments and potentially explosive atmospheres. Relay and mA outputs. GRP housing. EN54-10 and FM3260 approvals. IP65.

Configure

$2,095.18 
20/20MI-11-S-F
(2945)

SPECTREX  20/20MI-11-S-F

SPECTREX Sharp Eye 20/20MI Mini Triple IR (IR3) Flame Detector for detection of gasoline, n-heptane, diesel, JP5 jet fuel, kerosene, ethanol, IPA, methanol, methane, LPG propane, hydrogen, polypropilene, hydroxy fuels, hydrazine, paint spray and paper fires. Low cost, stainless steel enclosure, compact and lightweight. Highly resistant to harsh environments, immune to false alarms and designed for OUTDOOR or INDOOR applications. 2 Relays (Alarm and Fault-not with Ex), 0-20mA (sink or source), automatic and Manual Built-In-Test (BIT) and compatible with RS-485 Modbus. Stainless steel housing. Available Approvals: FM (Functionality, No Ex)

Configure

$2,225.11 
16589-20
(6730)

FIRERAY  16589-20

Fireray Talentum 16589-20 IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66.

Configure

$2,366.40 
16219-20
(6732)

FIRERAY  16219-20

Fireray Talentum 16219-20 Flameproof (Exd) IR3 Flame Detector for High Ambient Temperature. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$2,953.08 
40/40C-I-6-41-AC-N-7
(6857)

SPECTREX  40/40C-I-6-41-AC-N-7

SPECTREX SharpEye 40/40C-I Multispectrum Quad-Sense™ Flame Detector with IR3 technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA® 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$3,907.40 
16549-20
(6733)

FIRERAY  16549-20

Fireray Talentum 16549-20 Stainless Steel Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$3,945.60 
40/40D-I-6-31-AC-N-7
(6883)

SPECTREX  40/40D-I-6-31-AC-N-7

SPECTREX SharpEye 40/40D-I Ultra Fast Multispectrum Quad-Sense™ Flame Detector with IR3 technology. Detects hydrocarbon fires at long distances with superior immunity to false alarms. 24 Vdc. Includes HART capability, Automatic Built-In-Test (BIT), 3 Relays for alarm, fault and auxiliary and RS-485 Modbus outputs. Heavy duty copper free aluminum housing. IP66 and IP68. NEMA® 250 6P. ATEX, IECEx, FM, CSA and SIL3 Approved. Capable for Class I Div 1 & 2.

Configure

$4,298.29 
     NEWS & CASES      
() Reviews | Write One
16519-20
Previous Button
Next Button

 

About Contact Request Imprint Privacy Newsletter My Orders Previously Viewed Trending Now

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines