Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (6730)

FIRERAY  16589-20

$2,146.50     Availability: 9 Weeks
 Info/Quote Request
 Shipping Rates
 Volume discount



FIRERAY 16589-20 (1)
  • Overview
  • Features
  • Specs
  • Related
  • Literature

Fireray Talentum 16589-20 IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66.

Part# with Options:        16589-20
Price with Options:        2,146.50

Options:    

Mounting Bracket
(1) Mounting Bracket for Fireray Talentum
Weather Shield
(2) Weather Shield for Fireray Talentum

  Availability 9 Weeks  ]

The Talentum ® triple Infra-Red (IR3) Flame Detector is designed to protect areas where open fires may be expected and detects almost all flames, including hydrocarbon fires with 4.3 μm emissions through to invisible fires such as hydrogen.

The IR3 Flame Detector is sensitive to flickering, low frequency (1- 15Hz) infra-red radiation emitted by flames during combustion even if the lens is contaminated by a layer of oil, dust, water, vapour or ice.

This detector has three IR sensors which respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms from flickering sunlight are avoided by a combination of filters and signal processing techniques.

The Talentum ® IR 3 detector has selectable output options of relay contacts or 4-20mA signal, as standard.

Features
  • Excellent immunity to false sources
  • Tolerant of fumes, vapours, dust and mist
  • Suitable for indoor and outdoor areas
  • Unaffected by convection currents, draughts or wind
  • Proven response to multiple fuel types
  • Multi-spectrum detection
  • Selectable output options
  • Selectable response speed
  • Selectable sensitivity levels
  • Built in auto and manual test
  • Low current consumption
  • Fast response to fire
Applications
  • Refineries
  • Pharmaceutical Production
  • Compressor Stations
  • Military Applications
  • Fuel Loading Racks
  • Marine Industry
  • Chemical Plants
  • Aircraft Hangars
  • Tunnels
  • Coal Handling
  • Waste Recycling
  • Printing
  • Nuclear Power Sites
  • Petrochemical Offshore/Onshore
  • Storage Tanks
  • LNG/LPG Production
  • Engine Rooms
  • Spray Booths
  • Biomass Storage and Handling

Mechanical Specification
Housing Material Die Cast Zinc Alloy (ZA12)
Housing Colour Blue
Dimensions 5.91"H x 5.75"W x 5.39"D
(142(H) x 108(W) x 82(D) mm)
Weight 5.51lbs (2kg)
Cable Gland Entries 3 x 0.79" (2 x 20 mm)
Wiring 1.0 to 4.0mm2
Electrical Specification
Supply Voltage 14 to 30Vdc
Quiescent Current 8mA, RL2 energised
4mA, current loop, RL2 off
3mA, RL2 off
Alarm Current 28mA, RL1 & RL2 energised
20mA, current loop, RL1 & 2 off
9mA, RL1 energised
Power Up Time 2 seconds max.
Test Signal Voltage 14 to 30Vdc
Relay Outputs
- Programmable
- Ratings: Current
Voltage
Power
Normally Open or Normally Closed
Latching or Non-latching
1.0A Max.
50Vdc Max.
30W Max. (Note: Resistive Loads Only)
Environmental
Operating Temperature -20°C to +60°C
Storage Temperature -20°C to +125°C
Relative Humidity 95% Non condensing
IP Rating I IP66
Performance
Range - Class 1*
- Class 3
0.1m2 n-heptane at 25m
0.1m2 n-heptane at 12m (see EN54:10 for sensitivity settings)
Field of View 90° min. Cone
Operating Wavelength Band - IR 0.75 to 2.7μm
Approvals
FM Approved Cert. No. 3059453
CPR 0832-CPR-F0583
LPCB 1204a/11
VdS G212189
SIL 2 C127_CT003_(2.0)

  • FLAME DETECTORS > TRIPLE IR
    16219-20 Fireray Talentum 16219-20 Flameproof (Exd) IR3 Flame Detector for High Ambient Temperature. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx app ..

  • FLAME DETECTORS > TRIPLE IR
    16519-20 Fireray Talentum 16519-20 Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66. ..

  • FLAME DETECTORS > TRIPLE IR
    16549-20 Fireray Talentum 16549-20 Stainless Steel Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66. ..

  • FLAME DETECTORS > ULTRAVIOLET/INFRARED
    16591-20 Fireray Talentum 16591-20 UV/IR2 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation along with ultra-violet. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. IP66. ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal

> TRIPLE IR :    9 Items found.
20/20MPI-R
(2940)

SPECTREX  20/20MPI-R

SPECTREX Sharp Eye 20/20MPI IR3 Flame Detector for indoor applications. Low cost, High Performance, High Reliability and Long Distance for hydrocarbon-based fuel and gas fires. Polycarbonate housing. 2 Relays (Alarm and Fault) OR 0-20mA output and compatible with RS-485 Modbus. IP55. Includes Tilt mount and protective cover. Automatic and Manual Built-In-Test (BIT), indoor use. Available Approvals: FM3260 and EN54-10 (Pending).

Configure

$1,788.57 
100-0017-01
(4720)

ESP SAFETY  100-0017-01

ESP Safety IPES-IR3 Infrared Flame Detector for detection of combustible vapors gases fires. Rapid flame recognition and alarm signaling. Sends an alarm only when data from 3 different IR wavelengths detects a flame. RS-485, Modbus RTU, 4-20mA and relay outputs. Tri-Color status LED. Explosion-proof Housing. IP66. Designed for Class I, Division 1, Group B, C & D. SIL3 Rated. Includes protective visor, stainless steel mounting bracket and hardware.

Configure

$1,811.22 
FSL100-IR3
(6772)

HONEYWELL  FSL100-IR3

Honeywell FSL100-IR3 Flame Detector for robust, fast, and reliable detection of liquid hydrocarbon and dirty fires in indoor/outdoor environments and potentially explosive atmospheres. Relay and mA outputs. GRP housing. EN54-10 and FM3260 approvals. IP65.

Configure

$1,952.55 
16519-20
(6731)

FIRERAY  16519-20

Fireray Talentum 16519-20 Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$2,392.50 
20/20MI-11-S-F
(2945)

SPECTREX  20/20MI-11-S-F

SPECTREX Sharp Eye 20/20MI Mini Triple IR (IR3) Flame Detector for detection of gasoline, n-heptane, diesel, JP5 jet fuel, kerosene, ethanol, IPA, methanol, methane, LPG propane, hydrogen, polypropilene, hydroxy fuels, hydrazine, paint spray and paper fires. Low cost, stainless steel enclosure, compact and lightweight. Highly resistant to harsh environments, immune to false alarms and designed for OUTDOOR or INDOOR applications. 2 Relays (Alarm and Fault-not with Ex), 0-20mA (sink or source), automatic and Manual Built-In-Test (BIT) and compatible with RS-485 Modbus. Stainless steel housing. Available Approvals: FM (Functionality, No Ex)

Configure

$2,397.61 
16219-20
(6732)

FIRERAY  16219-20

Fireray Talentum 16219-20 Flameproof (Exd) IR3 Flame Detector for High Ambient Temperature. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$2,839.50 
16549-20
(6733)

FIRERAY  16549-20

Fireray Talentum 16549-20 Stainless Steel Flameproof (Exd) IR3 Flame Detector. Sensitive to flickering and low frequency (1-15Hz) infra-red radiation. Relay or 4-20mA outputs. FM Approved for Class I Div. 1, Class I Zone 1. ATEX and IECEx approvals. IP66.

Configure

$3,498.00 
40/40I-111AC
(894)

SPECTREX  40/40I-111AC

SPECTREX SharpEye 40/40I Triple IR (IR3) Flame Detector multi spectrum based on three IR bands (IR3), detects fuel and gas fires at long distances with the highest immunity to false alarms. Can detect several fuels, a 1ft2 (0.1m2) gasoline pan fire at 215 ft (65m) in less than 5 seconds. 3 Relays (Alarm, Fault and Auxiliary), 0-20mA stepped, compatible with RS-485 Modbus. Automatic and Manual Built-In-Test (BIT) feature included. Ex approved for Zone 1, ATEX, IECEx, FM and CSA Class I Div 1. 5 year warranty and is SIL2 (TUV) approved to IEC 61508

Configure

$3,541.44 
40/40UFI-111AC
(5026)

SPECTREX  40/40UFI-111AC

SPECTREX SharpEye 40/40UFI Ultra Fast Triple IR (IR3) multi spectrum Flame Detector. Detects hydrocarbon fuel and gas fires at long distances with the highest immunity to false alarms. Include a heated window to eliminate condensation and icing, HART capability, Automatic Built-In-Test (BIT), 3 Relays for Alarm, Fault and auxiliary and RS-485 Modbus output. IP66 and IP67. ATEX, IECEx, FM, CSA and SIL2 Approved. Capable for Zones 1, 2, 21 & 22.

Configure

$3,953.42