Mru 951055 | Multi-gas | Emissions-combustion | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

MRU   951055

SKU# (6712)



MRU 951055

ANALYZERS / EMISSIONS-COMBUSTION
MULTI-GAS

$16,427.00  [5 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
MRU SWG 100 CEM Stationary Continuous Emissions Analyzer for CEMS applications for measurement of Oxygen (O2) 0-25%, Carbon monoxide (CO)0-10000ppm, Carbon Dixide (CO2) 0-40%, Nitric oxide (NO) 0-4000ppm, Nitrogen Dioxide (NO) 0-1000ppm or Sulfur dioxide (SO2) 0-4000ppm with NDIR and electrochemical cells. 4x4-20 mA, 2 alarm relays and RS485 Modbus. IP54.

RELAYS   MODBUS

951055   
16,427.00

Oxygen Sensor
CO Sensor
NO Sensor
NO2 Sensor
requires heated sampling line and sample gas cooler
SO2 Sensor
requires heated sampling line and sample gas cooler
NDIR Sensor CO2/HC
NO2 and SO2 measurement requires use of heated sampling line
Cabinet Heater 200W
For use in safe area only
Data Transfer
I/O Module with 4 channel 4-20 mA analog output and 2 alarm relays (fail-safe NO contacts) includes remote sampling point switching control via 4x contacts and 4 channel analog input 4-20mA
Networking
Flow Monitor
3 to 30 m/sec flow velocity, for stacks with up to 300°C stack gas temperature
Unheated Sampling Line
Teflon (PTFE) DN4/6mm
Gas Sampling Probes
Gas sampling probe model LD for low dust with on tip sintered metal filter
Heated Sampling Line
Teflon (PTFE) DN4/6mm
Heated Sampling Line Extension
Gas sampling probe HD-GW

  [  5 Weeks  ]
  • Direct and continuous / discontinuous measurement, with pressure and temperature
  • Advanced sample gas preparation
  • Proven sensor technologies
  • Fast & easy installation
  • Low cost operation / maintenance

THE COMPLETE READY TO USE emissions analyzer SWG 100 CEM is the low cost solution to be used with a wide variety of industrial emissions monitoring applications:

  • Cogeneration heat and power engines (CHP)
  • Small power plants, small gas turbines
  • Waste incinerators, ovens and kilns
  • Ethanol and palm oil plants and more
  • Food industry steam boilers
  • Bio methane and methane boilers
  • Industrial heaters and dryers
SWG 100 - CEM - Instrument main features are:
  • Field replaceable, plug & play pre-calibrated sensors
  • Very compact industrial design, for up to 6 gas simultaneous measurement
  • Use low cost but reliable electrochemical cells for 02, CO, NO. NW, SO2
  • And infrared module (NDIR) for CO2 measurement
  • Advanced sample gas preparation for fast and reliable measurements
  • Flexible platform can be used for various combustion applications
  • Direct and continuous/discontinuous measurement, with pressure and temperature
  • Compensation of all main flue gas parameters
  • External measurements (temperature, pressure, etc.) by reading of ext. standard signal
  • Simple installation, ready to run delivery and easy to maintain

THE MRU SWG 100 CEM continuous emission monitoring analyzer, is designed for use in the harsh industrial environment of different combustion sites, where flue gas emissions must be continuously monitored.

The analyzer can be installed in outdoor or indoor locations, can sample dry or wet flue gas, pressurized or low pressure flue gas, even from a long distance sampling point.

The analyzer system can be configured with different gas sampling probes and sampling lines to optimize the sample gas preparation.

Measurement componentsMeasuring range (Accuracy)Measuring method
O2 Oxygen0 ... 25 % (0.2 % abs.)electrochemical
CO Carbon monoxide0 ... 10,000 ppm (±10 ppm or 3 % reading)electrochemical
NO Nitric oxide0 ... 4,000 ppm (± 5 ppm or 3 % reading)electrochemical
NO2 Nitrogen dioxide0 ... 1,000 ppm (± 5 ppm or 3 % reading)electrochemical
SO2 Sulfur dioxide0 ... 4,000 ppm (± 10 ppm or 3 % reading)electrochemical
CO2 Carbon dioxide0 ... 40 % (±0,3 % or 3 % reading)NDIR
Warranty1 Year Analyzer and Sensors
TECHNICAL SPECIFICATIONS
Calculated componentTrue NOx : NO + NO2
Calc. NOx = 1.05*NO (if NO2 is not measured)
All emissions relevant mg/Nm3; user selectable O2 referencing
Combustion efficiency (fuel type depending), heat loss, dewpoint
HMI human machine interface3.5” TFT color and backlit display
Keyboard and password protected operation
I/O module with 4channel, analog out 4-20 mA, floating, max. load 500 R and 2 alarm relays, potential free contacts 24 Vdc/5 A
SD-card for data and event logging
RS485 digital interface (Modbus RTU)
DIN-rail RS485 / ProfiBus converter
Sample preparationGas sampling probe HD, heated ceramic filter with back-purge, or gas sampling probe HD-GW, heated quartz wool filter, or gas sampling probe LD, non-heated with in-situ sintered filter
Heated or non-heated DN4/6 mm PTFE sampling line
Thermoelectric gas cooler (Peltier type) with constant 41°F (+5 °C) dewpoint
Teflon particulate filter, internal Viton hosing
Controlled and regulated gas sampling pump
Constant gas sample flow of 50 l/h
Sample inlet pressure: -80 inH2O to 80 inH2O (-200 mbar to +200 mbar)
Sample venting: atmospheric pressure
Cabinet dimensionsAluminum with anti-corrosive structural painting
27.55" x 23.61" x 8.26" (700 x 600 x 210 mm) ( H x W x D ) for wall or rack mounting
Weight / Protection55lbs (25kg) / IP54
Ambient temperature41°F...113°F standard, 41°F...131°F with Vortec cooler, 14°F...113°F with cabinet heater
+5°C...+45°C standard, +5°C...+55°C with Vortec cooler, -10°C...+45°C with cabinet heater
Installation siteIndoor or outdoor (rain and sun shade is mandatory user scope of supply)
Cabinet conditioningContinuous, monitored fan ventilation
Cabinet heater 200 W
Cabinet Vortec cooler (requires 0,5m3/min clean and dry compressed air)
Power supplyUniversal 90 - 240 Vac / 47 - 63 Hz / 90 W (300 W with cabinet heater)
Warranty1 Year Analyzer and Sensors
Export Info
Made inGermany
Harmonized Tariff Code (HTC)90279050

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer/Electronic Payment and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> MULTI-GAS :    4 Items found.
420082
(6562)

MRU  420082

MRU AMPRO Plus Handheld Combustion & Emission Analyzer for measurement of up to 7 gases simultaneusly, includes long life (4-5 years) O2 [0-21%] and CO (H2-compensated) [0-4,000 ppm/overload 20,000 ppm] sensors, also included calculated CO2. Optional NDIR measured CO2, NDIR measured hydrocarbons, electrochemical NO, NO2, SO2, CO-High, CO-very high. Supports up to 5 electrochemical and 1 CO2+Hydrocarbon NDIR sensors. IP42. Includes Li-ion battery (up to 15 hours), 3.5" TFT backlit display, USB port, SD card reader, IRDA interface, condensate separator, charger, Bluetooth, Smartphone App. Replaces AMPRO 2000.

Configure

$2,367.00 
Gasboard-3200plus-CH4+CO2
(7313)

CUBIC INSTRUMENTS  Gasboard-3200plus-CH4+CO2

Cubic Instruments Gasboard 3200Plus Handheld Biogas, Landfill, Combustion, Waste Water Analyzer with NDIR or ECD sensor for measurement of Methane (CH4) 0-100%, Carbon Dioxide (CO2) 0-50%, Oxygen (O2) 0-25%, Hydrogen Sulfide (H2S) 0-10000 ppm, Hydrogen (H2) 0-2000 ppm or Carbon Monoxide (CO) 0-2000 ppm. Includes rechargeable Lithium battery, fluorine rubber hose, CaCl2 powder moisture filter and color display.

Configure

$2,400.00 
420074US
(6986)

MRU  420074US

MRU OPTIMAX BIOGAS, LANDFILL, COMBUSTION and WASTE WATER Hand Held Biogas Analyzer for measurement of Methane (CH4) 0-100%, Carbon Dioxide (CO2) 0-100%, Hydrogen Sulfide (H2S) 0-2000/5000ppm, Oxygen (O2) 0-25% and Biogas Pressure. Gas flow velocity, flow rate, differential temperature and differential pressure measurement. IP30. Includes 4” color display, Li-ion battery (up to 15 hours), internal data storage, bluetooth, Mini-USB interface, IRDA interface, WLAN interface, microSD card reader and charger. -Replaces Optima 7 Biogas-

Configure

$6,274.00 
947010US
(6575)

MRU  947010US

MRU NOVA PLUS Portable Emissions Analyzer for measurement of up to 8 gases simultaneusly, includes long life (4-5 years) O2 [0-25%], CO (H2-compensated) sensor [0-4000ppm], calculated CO2 and gas cooler. Optional NDIR measurement CO2 and Hydrocarbons CxHy, electrochemical CO-Very High, NO, NO2, SO2 and H2S. Supports up to 5 electrochemical sensors. IP20. Includes Li-ion battery (up to 20 hours), 3.5" TFT backlit display, Built-in printer, Bluetooth, USB port, SD card reader, charger and transport case.

Configure

$6,923.00 
MIRAMAR AUTOMATION LLC       
....

951055     $16,427
MRU / Analyzers
Emissions-combustion / Multi-gas

BEXL25E8R
E2S / Alarm Signal Devices
Atex / Speakers

DB20BC8NNNNN     $574
MEDC / Alarm Signal Devices
Atex / Speakers

2106B1416     $1,176
HONEYWELL / Detectors
Gas Detectors (explosion-proof) / Hydrogen

H110TL030G/A
E2S / Alarm Signal Devices
Weatherproof / Horn + Beacon

M001-0019-000     $299
MPOWER / Detectors
Gas Detectors (portable) / Hydrogen
AI Automation Services
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.