Bacharach 6302-4053 | Methane | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

BACHARACH   6302-4053

SKU# (6257)



BACHARACH 6302-4053

DETECTORS / GAS DETECTORS (GENERAL-PURPOSE)
METHANE

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Bacharach MGS-460 Gas Detector Transmitter with remote (5m) catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. 3 x relays (low, high & fault), analog output (4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V), RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP66 Housing. CE, UL and CSA Approvals. Mobile App Bluetooth Interface.

6302-4053
Please Email us your request for quote   

Gas Range

  [  7 Days  ]


FEATURES
  • Mobile App Interface
  • Simple Configuration via App
  • Remote Sensor (5 m cable)
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Temperature-compensated Measurement
  • Analog and Digital Communications
  • On-board Relays
  • Audible and Visual Alarms
  • Multiple Cable Entries and Terminals
  • Low-temperature Performance
BENEFITS
  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training
  • No tools required to set alarm behavior and alarm levels
  • Install gas detection in hard-to-reach areas
  • Save time and money on maintenance procedures
  • Easy process with no potentiometers or volt meters
  • Mitigates false alarms and optimizes accuracy in refrigeration applications
  • Integrates with BMS / BAS control systems via Modbus and / or analog outputs
  • Trigger additional alarm beacons and mechanical ventilation in the event of a refrigerant leak
  • Comply with ASHRAE 15 / EN 378 - no additional hardware
  • Quick and easy installation of all wiring; daisy-chain power and digital communications
  • Suitable for use in all refrigeration applications from machinery rooms to freezers
DESCRIPTION

Bacharach’s MGS-460 Gas Detector makes compliance with refrigeration safety codes simple and easy, saving time and money on equipment and installation. The remote sensor allows for gas detection to be installed in hard-to-reach areas with a conveniently located electrical and communication interface. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas.

The MGS-460 can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach’s optional MGS-408 Gas Detection Controller.

MGS-460 TECHNICAL DATA
Gases and Ranges Refrigerants: 1,000 ppm
CO2: 5,000 / 10,000 / 20,000 / 30,000 / 40,000 / 50,000 ppm
NH3: 100 / 1,000 / 5,000 / 100% LEL
O2: 30 Vol%
CO: 500
Combustible gases - Semiconductor (R-290, R-600, R-50, R-600a, HC-12a, R-717): 5,000 ppm
Combustible gases - NDIR (R-600, R-50, R-290): 100% LEL
Combustible gases - Catalytic (R-600, R-50, R-290, R-717): 100% LEL
NO2: 20 ppm
Status Indicator Single tri-color LED (green, red, orange)
Buzzer 72dB @ 10 cm
Output Single configurable analog output: 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Digital: Modbus RTU via RS 485
Power Supply 24V AC or DC (auto selecting), 4W (max)
Relay Three relays, SPDT, fixed low / high fault alarms
Rating 2 A @ 30 VDC
Enclosure IP66
Size (W×H×D) Approx. General purpose (base): 6.5” × 6.5” × 3.4” (165 × 165 × 87 mm)
Remote head: 4.5” × 5.4” × 2.7” (115 × 136 × 68 mm)
Weight Approx. 1lb, 11.7oz (758 g)
Approvals CE, UL / CSA / IEC EN 61010-1
Ambient Temperature Semiconductor: -40 to 122°F / -40 to +50°C
Electrochemical:
NH3: 100 / 1,000 ppm: -40 to 40°C
NH3: 5,000 ppm: -20 to 40°C
CO: 500 ppm: -40 to 50°C
NO2: 20 ppm: -20 to 40°C
O2: 30% Volume: -20 to 50°C
Infrared: -40 to 122°F / -40 to +50°C
Catalytic Bead: -40 to 122°F / -40 to +50°C
Ambient Humidity 5 to 90 % RH, non condensing
Ambient Pressure 23.6 to 32.5 inch Hg / 800 to 1,100 mbar
Free Mobile AppConfiguration, Maintenance, Calibration, User Interface via Bluetooth
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    5 Items found.
6302-9990
(6618)

BACHARACH  6302-9990

Bacharach MGS-400 calibration adapter / cup, includes 2 ft hose.



 
(6263)

BACHARACH  3015-8041

Bacharach 860 Series Electronic Xenon Horn (100dB) and Strobe (60fpm) for MGS-400 Detectors. Low Current and High Decibel. Thermoplastic housing.

Configure

 
6302-0053
(6237)

BACHARACH  6302-0053

Bacharach MGS-410 Gas Detector Transmitter with catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP66 Housing. CE, UL and CSA Approvals. Mobile App Bluetooth Interface.

Configure

 
6302-1053
(6247)

BACHARACH  6302-1053

Bacharach MGS-450 Gas Detector Transmitter with catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. 3 x relays (low, high & fault), analog output (4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V), RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP41 or IP66 Housing. CE, UL and CSA Approvals. Factory configured for either R600 or R290. Mobile App Bluetooth Interface.

Configure

 
6702-8000
(6262)

BACHARACH  6702-8000

Bacharach MGS-408 Gas Detection Controller for up to 8 MGS-400 Series detectors over Modbus RTU in Refrigeration Applications. Includes 3 x relays (low, high & fault), RS485 Modbus RTU communications, audible and visual alarms, event logging, powers MGS-400 Series gas detectors

Configure

 
> METHANE :    6 Items found.
364-450-01
(6147)

DELPHIAN  364-450-01

Delphian GazTell Fixed Point Infrared Gas Detector for Methane (CH4) (4-112% LEL or 4-100% vol). 4-20mA Output. Optional Modbus RTU Output and Alarm Relays. FM and SIL2 Approvals. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
6600-8073
(6274)

BACHARACH  6600-8073

Bacharach MGS-550 Industrial Refrigerant Gas Detector with semiconductor sensor for Methane (CH4) 0-5000ppm. 3 x relays, analog output, RS485 MODBUS output and 5-digit display. Remote sensor capabilities. IP66 Housing. CE, UL and CSA Approvals.

Configure

 
100-0008-A1/100-0015-C1
(4756)

ESP SAFETY  100-0008-A1/100-0015-C1

ESP Safety Vector 2-channel gas detector controller with smart Infrared IR Plug-In sensor included to detect Methane (CH4) 0-100% LEL. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. Optional 2nd sensor available.

Configure

$1,440.00 
EX-CH4-100L-O
(6029)

MACURCO  EX-CH4-100L-O

Macurco Ex Series Explosion Proof Catalytic Bead Gas Detector for detection of Methane (CH4) 0-100%LEL. Includes 4-20 mA Output, 3 Onboard Relays, Modbus RS-485 Communication and LCD Digital Display. Aluminium Enclosure. IP66. CSA approvals for Class I Division 2.

Configure

$1,451.62 
32001AL-0-9070/100P/L0
(6893)

RC SYSTEMS  32001AL-0-9070/100P/L0

RC Systems SenSmart 3200 3 wire gas detector for Natural Gas/Methane (CH4) 0-100% LEL with 'ST-48' smart transmitter with Catalytic Bead sensor. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,870.69 
GG2SAXXX-X-CH4
(5017)

ION SCIENCE  GG2SAXXX-X-CH4

Ion Science GasCheck G2 Micro Thermal Conductivity Leak Detector (MTCD) for Methane (CH4). Rapid and accurate. LCD back lit display, LED indicator and audible sounder. Low cost operation.

Configure

$4,086.60 
() Reviews | Write One      
....

6302-4053
BACHARACH / Detectors
Gas Detectors (general-purpose) / Methane
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.