Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (6247)

BACHARACH  6302-1053

$560.70     Availability: 7 Days
 Info/Quote Request
 Shipping Rates
 Volume discount



BACHARACH 6302-1053 (1)
  • Overview
  • Features
  • Specs
  • ACCESSORIES & RELATED
  • Literature

Bacharach MGS-450 Gas Detector Transmitter with catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. 3 x relays (low, high & fault), analog output (4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V), RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP41 or IP66 Housing. CE, UL and CSA Approvals. Factory configured for either R600 or R290. Mobile App Bluetooth Interface.

Part# with Options:        6302-1053
Price with Options:        560.70

Options:    

Gas Range
(1) Gas Range for Bacharach MGS-400 (CH4)
Housing
(2) Housing for Bacharach MGS-450

  Availability 7 Days  ]

FEATURES
  • Mobile App Interface
  • Simple Configuration via App
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Temperature-compensated Measurement
  • Analog and Digital Communications
  • On-board Relays
  • Audible and Visual Alarms
  • Multiple Cable Entries and Terminals
  • Low-temperature Performance
BENEFITS
  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training
  • No tools required to set alarm behavior and alarm levels
  • Save time and money on maintenance procedures
  • Easy process with no potentiometers or volt meters
  • Mitigates false alarms and optimizes accuracy in refrigeration applications
  • Integrates with BMS / BAS control systems via Modbus and / or analog outputs
  • Trigger additional alarm beacons and mechanical ventilation in the event of a refrigerant leak
  • Comply with ASHRAE 15 / EN 378 - no additional hardware
  • Quick and easy installation of all wiring; daisy-chain power and digital communications
  • Suitable for use in all refrigeration applications from machinery rooms to freezers
DESCRIPTION

Bacharach’s MGS-450 Gas Detector makes compliance with refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas.

The MGS-450 can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach’s optional MGS-408 Gas Detection Controller.

MGS-450 TECHNICAL DATA
Gases and Ranges Refrigerants: 1,000 ppm
CO2: 5,000 / 10,000 / 20,000 / 30,000 / 40,000 / 50,000 ppm
NH3: 100 / 1,000 / 5,000 / 100% LEL
O2: 30 Vol%
CO: 500
Combustible gases - Semiconductor (R-290, R-600, R-50, R-600a, HC-12a, R-717): 5,000 ppm
Combustible gases - NDIR (R-600, R-50, R-290): 100% LEL
Combustible gases - Catalytic (R-600, R-50, R-290, R-717): 100% LEL
NO2: 20 ppm
Status Indicator Single tri-color LED (green, red, orange)
Buzzer 72dB @ 10 cm
Output Single configurable analog output: 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Digital: Modbus RTU via RS 485
Power Supply 24V AC or DC (auto selecting), 4W (max)
Relay Three relays, SPDT, fixed low / high fault alarms
Rating 2 A @ 30 VDC
Enclosure IP41, IP66
Size (W×H×D) Approx. IP41: 6.5” × 6.5” × 3.0” (165 × 165 × 77 mm)
IP66: 6.5” × 6.5” × 3.4” (165 × 165 × 87 mm)
Weight Approx. 1lb, 1oz (480 g)
Approvals CE, UL / CSA / IEC EN 61010-1
Ambient Temperature Semiconductor: -40 to 122°F / -40 to +50°C
Electrochemical:
NH3: 100 / 1,000 ppm: -40 to 40°C
NH3: 5,000 ppm: -20 to 40°C
CO: 500 ppm: -40 to 50°C
NO2: 20 ppm: -20 to 40°C
O2: 30% Volume: -20 to 50°C
Infrared: -40 to 122°F / -40 to +50°C
Catalytic Bead: -40 to 122°F / -40 to +50°C
Ambient Humidity 5 to 90 % RH, non condensing
Ambient Pressure 23.6 to 32.5 inch Hg / 800 to 1,100 mbar
Free Mobile AppConfiguration, Maintenance, Calibration, User Interface via Bluetooth
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

  • ACCESSORIES > BACHARACH
    3015-8041 Bacharach 860 Series Electronic Xenon Horn (100dB) and Strobe (60fpm) for MGS-400 Detectors. Low Current and High Decibel. Thermoplastic housing. ..

  • ACCESSORIES > BACHARACH
    6302-9990 Bacharach MGS-400 calibration adapter / cup, includes 2 ft hose. ..

  • GAS DETECTORS (GENERAL-PURPOSE) > METHANE
    6302-0053 Bacharach MGS-410 Gas Detector Transmitter with catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single ..

  • GAS DETECTORS (GENERAL-PURPOSE) > METHANE
    6302-4053 Bacharach MGS-460 Gas Detector Transmitter with remote (5m) catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. 3 x relays (low, high & fault), analog output (4 to 20 mA, 0 to 5 V, 0 to 10 ..

  • MULTI-POINT CONTROLLERS > 8-CHANNEL
    6702-8000 Bacharach MGS-408 Gas Detection Controller for up to 8 MGS-400 Series detectors over Modbus RTU in Refrigeration Applications. Includes 3 x relays (low, high & fault), RS485 Modbus RTU communications, audible and visual alarms, event logging, powers MGS-4 ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> METHANE :    10 Items found.
6302-0053
(6237)

BACHARACH  6302-0053

Bacharach MGS-410 Gas Detector Transmitter with catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP66 Housing. CE, UL and CSA Approvals. Mobile App Bluetooth Interface.

Configure

$517.50 
364-450-01
(6147)

DELPHIAN  364-450-01

Delphian GazTell Fixed Point Infrared Gas Detector for Methane (CH4) (4-112% LEL or 4-100% vol). 4-20mA Output. Optional Modbus RTU Output and Alarm Relays. FM and SIL2 Approvals. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

$662.40 
6302-4053
(6257)

BACHARACH  6302-4053

Bacharach MGS-460 Gas Detector Transmitter with remote (5m) catalytic or semiconductor sensor for Methane (CH4) 0-100% LEL or 0-5000ppm measurement in Refrigeration Applications. 3 x relays (low, high & fault), analog output (4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V), RS485 MODBUS RTU output, included audible & visual alarms: 72dB @10cm buzzer and single tri-color LED (green, red, orange). IP66 Housing. CE, UL and CSA Approvals. Mobile App Bluetooth Interface.

Configure

$701.10 
6600-8073
(6274)

BACHARACH  6600-8073

Bacharach MGS-550 Industrial Refrigerant Gas Detector with semiconductor sensor for Methane (CH4) 0-5000ppm. 3 x relays, analog output, RS485 MODBUS output and 5-digit display. Remote sensor capabilities. IP66 Housing. CE, UL and CSA Approvals.

Configure

$711.90 
1200ALD-109050/100P
(6904)

RC SYSTEMS  1200ALD-109050/100P

RC Systems SenSmart 1200 gas detector for Natural Gas/Methane (CH4) 0-100% LEL or vol with 'ST-48' smart transmitter. IR sensor. 3-Wire bridge. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class 1 Div 1 (Explosion Proof).

Configure

$1,099.22 
100-0008-A1/100-0015-C1
(4756)

ESP SAFETY  100-0008-A1/100-0015-C1

ESP Safety Vector 2-channel gas detector controller with smart Infrared IR Plug-In Sensor to Detect Methane (CH4) 0-100% LEL. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification.

Configure

$1,440.00 
EX-CH4-100L-O
(6029)

MACURCO  EX-CH4-100L-O

Macurco Ex Series Explosion Proof Catalytic Bead Gas Detector for detection of Methane (CH4) 0-100%LEL. Includes 4-20 mA Output, 3 Onboard Relays, Modbus RS-485 Communication and LCD Digital Display. Aluminium Enclosure. IP66. CSA approvals for Class I Division 2.

Configure

$1,481.25 
32001AL___-0-9070/100P/L0
(6893)

RC SYSTEMS  32001AL-0-9070/100P/L0

RC Systems SenSmart 3200 3 wire gas detector for Natural Gas/Methane (CH4) 0-100% LEL with 'ST-48' smart transmitter with Catalytic Bead sensor. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class 1 Div 1 (Explosion Proof).

Configure

$1,722.50 
33001AL___-0-9050/100P/L0
(6898)

RC SYSTEMS  33001AL-0-9050/100P/L0

RC Systems SenSmart 3300 3 wire gas detector for Natural Gas/Methane (CH4) 0-100% LEL or %Vol with 'ST-48' smart transmitter with infrared (IR) sensor. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. Suitable for Class 1 Div 1 (Explosion Proof).

Configure

$1,906.94 
GG2SAXXX-X-CH4
(5017)

ION SCIENCE  GG2SAXXX-X-CH4

Ion Science GasCheck G2 Micro Thermal Conductivity Leak Detector (MTCD) for Methane (CH4). Rapid and accurate. LCD back lit display, LED indicator and audible sounder. Low cost operation.

Configure

$3,655.40