Gas leak detectors, analyzers, alarm devices and calibration gas
DETCON 965-242480-100 (1)
  • Overview
  • Benefits
  • Specs
  • Supplies
  • Documents

Detcon DM-500-H2S Electrochemical Hydrogen Sulfide (H2S) 0-100ppm Sensor Assembly with IS stainless steel and ABS plastic housing. Includes Backlit LCD and LED Indicators. 4-20mA output. Explosion proof. NEMA 4X. IP66. CSA and UL approvals for Class I, Div 1, Groups B, C & D.

Part# with Options:        965-242480-100
Price with Options:        Please Email us your request for quote   

Options:    

Junction Box
(1) Junction Box for Detcon Series 500/600

  Availability 2 Weeks  ]

Detcon Model DM-500IS-H2S sensor is designed to detect and monitor H2S in air over the range 0-100 ppm. The sensor assembly consists of an electrochemical fuel cell mounted in an Intrinsically Safe stainless steel and ABS plastic housing that includes a splashguard with integral cal port, a signal conditioning control transmitter circuit, a base connector board and an explosion proof junction box. The Intrinsically Safe sensor housing design allows direct contact of the target gas to the electrochemical sensor, thus maximizing response time, detectability and repeatability. And because the Intrinsically Safe housing design does not use a stainless steel flame arrestor, it eliminates inaccurate readings due to target gas absorption.

Features
  • CSA and UL Approved: Class 1, Div. 1, Groups B, C, & D
  • 4-20 mA output
  • Simple menu driven calibration - takes less than 3 minutes
  • Backlit LCD, and LED indicators for Fault, and Cal status
  • Universal plug-in transmitter
  • Intrinsically Safe Sensor Housing
  • Plug-in field-replaceable transmitter
  • Electrochemical plug-in sensor

Specifications
Sensor TypeElectrochemical Fuel Cell
Measurement Range0-100 ppm Hydrogen Sulfide
Other ranges available
Repeatability±2% FS
Response/Clearing TimeT90 <30 seconds
Span Drift<2% signal loss per month
Operating Temperature Range-40°C to +50°C; -40°F to +122°F
Operating Humidity Range15-90% RH non-condensing
OutputLinear 4-20 mA DC
Input Voltage11.5-28 VDC
Power Consumption1.6 watts @ 24 VDC
Electrical ClassificationExplosion proof
Class 1, Div. 1, Groups B, C, D
Ingress ProtectionNEMA 4X, IP66
Sensor Life/WarrantySensor: 2 year warranty
Transmitter: 2 year warranty
Safety ApprovalsCSA/NRTL (US OSHA Certified)

  • SENSORS (REPLACEMENT) > DETCON
    370-242400-000 Detcon Hydrogen Sulfide (H2S) plug-in detector assembly for DM-524-H2S and DM-600IS-H2S ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer, Check and Money Order

Checkout with Paypal

> GAS DETECTORS > HYDROGEN SULFIDE :    61 Items found.
10092521
(1637)

MSA  10092521

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 10 ppm and 15 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$93.88 
10071363
(5812)

MSA  10071363

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 7 ppm and 14 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$93.88 
BWC2-H510
(4263)

BW  BWC2-H510

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Low alarm set at 5 ppm, High alarm set to 10 ppm or 15 ppm. UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$117.00 
BWC2-H5
(4262)

BW  BWC2-H5

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$117.00 
BWC2R-H
(5148)

BW  BWC2R-H

BW Clip Real Time portable gas detector with 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$191.40 
4543958
(2635)

DRAEGER  4543958

Draeger Pac 3500 single gas detector for Hydrogen Sulfide (H2S) 0-100 ppm in industrial applications. Vibrating, audible (>90 dB at 30cm) and visual (360° flashing LEDs) alarm. IP65. CE, ATEX, UL, IECEx and GOST Approvals. Class I, II Div 1.



$193.20 
8326368
(6314)

DRAEGER  8326368

Draeger Pac 6000 Disposable Personal Single-Gas Detector for Hydrogen Sulfide (H2S) 0-100 ppm. Includes 360° alarm signal, large display, data and event logger, battery and a replaceable filter membrane for water and dust protection. Robust housing for tough conditions. IP68. Two year lifetime. CSA, IECEx, ATEX and CE approvals.



$200.56 
BWC3-H5
(4268)

BW  BWC3-H5

BW Clip portable gas detector 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$209.10 
G01-0102-000
(3067)

RAE  G01-0102-000

ToxiRAE 3 PGM-1700 Personal Portable Single-Gas Monitor For Hydrogen Sulfide (H2S) 0-100ppm. Dust-tight and waterproof housing. Pinless micro sensor, large display, event logging, 95dB audible alarm, red flashing LEDs and internal vibration alarm. IP67. C1D1, ATEX and IECEx Approved.



$235.60 
TX1-2
(5966)

INDUSTRIAL SCIENTIFIC  TX1-2

Industrial Scientific Tango TX1 Gas Detector for Hydrogen Sulfide (H2S) 1-500 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

$238.50 
BWC3R-H
(5152)

BW  BWC3R-H

BW Clip Real Time portable gas detector with 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$241.86 
4543961
(3505)

DRAEGER  4543961

Draeger Pac 5500 single gas detector for Hydrogen Sulfide (H2S) 0-100 ppm in personal monitoring applications. No lifetime limitation. Vibrating, audible (>90 dB at 30cm) and visual (360° flashing LEDs) alarm. IP65. CE, ATEX, UL, IECEx and GOST Approvals. Class I, II Div 1.



$289.80 
GAXT-H-DL
(458)

BW  GAXT-H-DL

BW GasAlertExtreme Portable detector with gas concentration readout for Hydrogen Sulfide H2S 0-100 ppm.

Configure

$322.08 
GAXT-H-2-DL
(457)

BW  GAXT-H-2-DL

BW GasAlertExtreme Portable detector with gas concentration readout for Hydrogen Sulfide H2S 0-500 ppm (extended range)

Configure

$363.44 
10154076
(4446)

MSA  10154076

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S-LC) 5-10ppm. Offers superior stability, accuracy, and sensor life. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. Minimal rF interference. IP67. cCSAus, ATEX and IEC Approved.

Configure

$367.89 
10162042
(4447)

MSA  10162042

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S) STD. Offers superior stability, accuracy, and sensor life. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. Minimal rF interference. IP67. cCSAus, ATEX and IEC Approved.

Configure

$367.89 
10153984
(4448)

MSA  10153984

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) 10-15ppm. Stand-alone bump test. Offers superior stability, accuracy, and sensor life. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. Minimal rF interference. IP67. cCSAus, ATEX and IEC Approved.

Configure

$416.70 
10157955
(4455)

MSA  10157955

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) 5-10ppm. Stand-alone bump test. Offers superior stability, accuracy, and sensor life. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. Minimal rF interference. IP67. cCSAus, ATEX and IEC Approved.

Configure

$416.70 
8318971
(2637)

DRAEGER  8318971

Draeger Pac 7000 small single gas detector for Hydrogen Sulfide (H2S) 0-200 ppm for personal monitoring. TWA and STEL alarms. IP65. CE, ATEX, UL, IECEx, MED and ATEX Approvals. Class I, II Div 1.



$445.28 
G02-B110-100
(3017)

RAE  G02-B110-100

ToxiRAE Pro PGM-1860 Personal Portable Monitor For Hydrogen Sulfide (H2S) 0-100 ppm with replaceable sensor, filter and Li-ion battety. Automatic bumb testing and calibration with AutoRAE 2 (optional). Includes Datalogging, Graphical LCD display, 2 buttons for operation and programming. CSA, ATEX, IECEx and China Ex Approved. IP-65. Wireless-capable option.

Configure

$449.35 
Page: 1 | 2 | 3 | 4 | All