Gas Leak Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (5812)

MSA  10071363

$112.15     Availability: 7 Days
 Info/Quote Request
 Shipping Rates
 Volume discount
MSA 10071363
  • Overview
  • Features
  • Specs
  • Literature

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 7 ppm and 14 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.

$112.15      

  Availability 7 Days  ]

MSA’s ALTAIR Single-Gas Detector provides over two years of maintenance-free performance (depending upon alarm minutes used). Long life, cost-effective single-gas detectors offer outstanding dust and water protection and feature a distinctive triple alarm system. Two bright LEDs and piercing audible alarm with standard vibrating alarm help to ensure that no alarm condition goes unnoticed. Rubberized armor housing and one-button operation provide durability and ease of use. Units will not deactivate after two years of operation; instead will perform as long as battery capacity and sensor performance allow. Built-in calibration feature enables users to potentially further extend instrument life. ALTAIR Single-Gas Detectors are part of MSA’s ALTAIR Detector family of products.

FEATURES

  • Factory-calibrated detector with warranted two-year service life (1080 alarm minutes)
  • Maintenance-free; no sensor or battery changes necessary
  • Easy bump check and built-in calibration feature
  • Bump check confirmed with checkmark on instrument LCD, displayed for 24 hours
  • High-capacity battery
  • Event recorder stores 25 latest events automatically in instrument memory
  • Built-in IR communications enables interface MSA LinkTM Software
  • Built-in gas delivery adapter for gas response tests (no cal cap to lose)
  • Rated to IP67 for dust and water ingress
Maintenance-Free Service Life

Factory-calibrated detector provides warranted two-years or 1080 alarm minutes (18 hours) of service life with no maintenance. No sensor or battery changes are needed. Built-in gas delivery adapter means no misplaced accessories when conducting gas response tests, avoiding hidden replacement costs.

Bump Check Made Easy

By confirming Gas Test with a single button press, the unit allows for a simple bump check to be recorded and displayed onscreen via a checkmark for 24 hours. This checkmark is confirmation of not only an electronic circuit check but also of sensor response. While it is only necessary to perform a bump test to ensure proper sensor response, ALTAIR Single-Gas Detector offers built-in calibration as required in some facilities.

Long-Life Battery

Long-life lithium battery offers significantly more capacity than its closest competitor and far outlasts the two minutes of alarm mode per day standard. ALTAIR Single-Gas Detector units will not deactivate after two years of operation but will continue to deliver performance as long as battery capacity and sensor performance allow. No other maintenance-free single-gas detector in its class can beat this performance.

Sensors

Patented, MSA-built Button® Cell toxic gas sensors feature stainless steel construction and contain solid electrolyte, virtually eliminating sensor leakage. Extremely small and thin sensor profile allows ALTAIR Single-Gas Detectors to deliver high performance in a very small package. Toxic gas sensors provide stability for the unit’s service life. ALTAIR Single-Gas Detector oxygen version accommodates industry- standard fast-responding 20 Series oxygen sensor and is UL, cUL, ATEX, and Australian standards-approved.

Built-in IR Communication

ALTAIR Single-Gas Detectors record the 25 latest alarm events automatically, offering a great tool for alarm condition assessment: just connect it to your MSA InfraRed adapter using standard, built-in IR communication. Alarm set points can be adjusted manually prior to the unit's activation or through IR link after activation.

Rugged Clip

ALTAIR Single- Gas Detectors use a proven suspension clip to be worn anywhere in the breathing area: on the helmet, belt, and many other places. MSA’s rugged clip design keeps unit attached during even the roughest use.

Easy-To-Read Display

ALTAIR Single-Gas Detectors offer a simple, easy-to-read display. Large numeric display allows users to count down service life, alarm conditions, set points, peak reading, and hours in alarm since activation with accuracy and confidence. O2 version display helps users to identify current levels as well as highest and lowest readings at a glance. Users can perform fresh air setup and reset peak readings with the touch of a button.

Water and Dust Resistance

ALTAIR Single-Gas Detectors are highly water- and dust-resistant and are tested to IP67. Simple yet effective design uses rubberized armor to seal units from water and dust ingress, providing a tight seal and exceeding the industry-average rating.

ALTAIR QuickCheck® Station

ALTAIR QuickCheck Stations are inexpensive test stations for ALTAIR and ALTAIR Pro Gas Detectors. Available in manual and automatic versions, this test station quickly verifies instrument alarm system functionality and then performs a gas response test (bump check).

Galaxy® Automated Test System

The Galaxy Automated Test System for the ALTAIR and ALTAIR Pro Gas Detectors is a complete instrument calibration and record retention system. Options such as industry-standard memory card, wired networking, and receipt printing allow this flexible system to be configured to meet your needs.

Distinctive Alarm System

Triple alarm system leaves no doubt for users in alarm situations. Audible alarm sounds at an average of 95 dB@1 foot and is designed to be distinctive among other workplace sounds. Alarm’s extended frequency range covers a wide sound spectrum even when used by tone-deaf individuals. Visual alarm features dual, super-bright LEDs on unit’s top and are visible from all angles and when worn inside the pocket. Numeric display shows LO or HI alarm status. Vibrating alarm comes standard and emits a pulse when in alarm mode that calls additional attention to users.

Durability

Extra-thick rubberized housing withstands accidental drops and provides resistance to water ingress. Metal screw inserts offer stability over the unit’s lifetime. MSA’s focus on reliability, ease of use, and durability are key design elements of ALTAIR Single-Gas Detectors.

Specifications
Weight 4.0 oz including clip
Dimensions 3.4” x 2.0” x 1.0”
Alarms Average >95 dB @ 30 cm, Ultra - LEDs, vibrating alarm standard
Warranty 2 years or 1080 minutes (18 hrs) of alarm under normal conditions
Instrument Life >2 years at an average of 2 minutes of alarm per day
Operating T Range -20oC to +50oC
Humidity 10-95% RH non-condensing
Ingress Protection IP67
Event Logging 25 latest events
Certifications
US and Canada
Europe
Australia

Class 1, Division 1, Groups A, B, C and D
ATEX II 2G EEx ia IIC T4 -20oC to +50oC
Ex ia IIC T4 -20oC to +50oC


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer, Check and Money Order

Checkout with Paypal

> HYDROGEN SULFIDE :    61 Items found.
10092521
(1637)

MSA  10092521

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 10 ppm and 15 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$100.93 
BWC2-H510
(4263)

BW  BWC2-H510

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Low alarm set at 5 ppm, High alarm set to 10 ppm or 15 ppm. UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$101.40 
BWC2-H5
(4262)

BW  BWC2-H5

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$101.40 
M014-0002-000
(6332)

MPOWER  M014-0002-000

mPower UNI 321 Disposable Single Gas Detector for detection of Hydrogen Sulfide (H2S) 0.1-100ppm. Up to 36 months of live. Large LCD display will show time remaining or low/high alarm levels when hit, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, UL approval for Class I Div 1.

Configure

$106.40 
BWC2R-H
(5148)

BW  BWC2R-H

BW Clip Real Time portable gas detector with 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$187.00 
M001-0003-000
(6001)

MPOWER  M001-0003-000

mPower UNI MP100 Portable Single Gas Detector for detection of Hydrogen Sulfide (H2S) 0-50ppm to 0-1000ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, UL approval for Class I Div 1.

Configure

$188.00 
BWC3-H5
(4268)

BW  BWC3-H5

BW Clip portable gas detector 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$209.10 
BWC3R-H
(5152)

BW  BWC3R-H

BW Clip Real Time portable gas detector with 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$236.30 
TX1-2
(5966)

INDUSTRIAL SCIENTIFIC  TX1-2

Industrial Scientific Tango TX1 Gas Detector for Hydrogen Sulfide (H2S) 1-500 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

$245.70 
G01-0102-000
(3067)

RAE  G01-0102-000

ToxiRAE 3 PGM-1700 Personal Portable Single-Gas Monitor For Hydrogen Sulfide (H2S) 0-100ppm. Dust-tight and waterproof housing. Pinless micro sensor, large display, event logging, 95dB audible alarm, red flashing LEDs and internal vibration alarm. IP67. C1D1, ATEX and IECEx Approved.



$247.00 
BTN-6444
(6724)

PROSENSE  BTN-6444

Prosense BTN-6444 Gas Detector with Electrochemical sensor for Hydrogen Sulfide (H2S) with range 0-100 ppm. ABS plastic housing. 2 Alarms and 1 Fault Relays and optional Modbus RS485 RTU output. IP54.

Configure

$306.00 
BWS_-HL-Y
(6389)

BW  BWS-HL-Y

BW Solo Serviceable Single-gas Detector for Hydrogen Sulfide (H2S) 0-200 ppm or 0-500 ppm. Small and lightweight. One button operation. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

$327.25 
10154076
(4446)

MSA  10154076

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S-LC) Range 0-100 ppm. Low Alarm 5ppm, High Alarm 10ppm. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$373.46 
10162042
(4447)

MSA  10162042

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S) STD Range 0-200 ppm. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$373.46 
G02-B110-100
(3017)

RAE  G02-B110-100

ToxiRAE Pro PGM-1860 Personal Portable Monitor For Hydrogen Sulfide (H2S) 0-100 ppm with replaceable sensor, filter and Li-ion battety. Automatic bumb testing and calibration with AutoRAE 2 (optional). Includes Datalogging, Graphical LCD display, 2 buttons for operation and programming. CSA, ATEX, IECEx and China Ex Approved. IP-65. Wireless-capable option.

Configure

$413.25 
10153984
(4448)

MSA  10153984

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) Range 0-200 ppm. Low Alarm 10ppm, High Alarm 15ppm. Stand-alone bump test. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$422.81 
10157955
(4455)

MSA  10157955

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) 5-10ppm. Stand-alone bump test. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$422.81 
SPSTAXH1
(1474)

HONEYWELL  SPSTAXH1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Hydrogen Sulfide (H2S) with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20mA loop output. ATEX Approved. (Optional ranges: 0-20 ppm, 0-50 ppm, 0-100 ppm)

Configure

$466.04 
TX-6-HS
(2045)

MACURCO  TX-6-HS

Macurco TX-6-HS low voltage Gas Detector, Controller and Transducer for Hydrogen Sulfide (H2S) 0-50 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$480.84 
TX-12-HS
(3419)

MACURCO  TX-12-HS

MACURCO TX-12-HS line voltage Gas Detector, controller and transducer for Hydrogen Sulfide (H2S) 0-50 ppm. Selectable 4-20mA output, buzzer, alarm and fan relays with digital display. 100 to 240 VAC 50-60Hz power. ETL Listed to UL 61010-1.

Configure

$486.53 
Page: 1 | 2 | 3 | 4 | All