Honeywell H-d03-0009-000 | Voc Pid | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

HONEYWELL   H-D03-0009-000

SKU# (4307)



HONEYWELL H-D03-0009-000

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
VOC PID

$7,365.27  [9 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Honeywell RAEGuard 2 PID Photoionization Detector for VOCs (Volatile Organic Compounds), 10.6 eV Lamp only. 10 to 28 VDC. 4-20mA three-wire and RS-485 Modbus outputs. Explosion-proof stainless-steel enclosure. Graphic display. LED light status indicator. IP65. UL approved for Class I Div 1. (Zone 1). ATEX and IECEx also available.

H-D03-0009-000   
7,365.27

Range
kit includes: RAEGuard 2 PID fixed head. DigiPID sensor module, magnetic key, hex service tool, 5 pack of external water trap filters, user manual.

[  9 Weeks  ]



The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analogue (4-20mA) three-wire signal output, and RS-485 Modbus digital signal output. Calibration and maintenance have been greatly simplified as the digital PID module can be easily removed in hazardous locations for calibration or maintenance.

The RAEGuard 2 PID has a graphic display and LED light status indicator for fault and alarm conditions. In addition, Low, High, and Fault relays 1 can be configured to trigger external alarms or process controls. Over 200 correction factors 1 are pre-programmed and allow users to display readings of a specific target gas. A magnetic key interface enables the detector to be calibrated and operational parameters adjusted with the explosion-proof enclosure in place.

Key Features

  • Class I, Division 1 (Zone 1) continuous VOC monitoring solution for hazardous locations
  • Three wire 4-20mA analogue output and RS-485 digital communication in Modbus protocol
  • Three dry contact relays (<30V, 2A) normally open (or normally closed), one for high and low alarm, another for fault alarm
  • Explosion-proof stainless-steel enclosure suitable for outdoor hazardous environment applications
  • Magnetic-key interface eliminates the need to open the explosion-proof housing when adjusting parameters
  • Continuous VOC monitoring in hazardous and non-hazardous area locations
  • Reduced maintenance costs due to easily removable sensor module. Sensor and lamp can be removed without tools and serviced in hazardous locations
  • Faster response time with sample flow-through design powered by internal diaphragm pump
  • Humidity compensation ensures accurate readings even in humid environments

Applications

  • Refineries and petrochemical plants
  • Power plants
  • Solvent recovery systems
  • Painting and coating operations
  • Waste water treatment plants
  • Air quality

RAEGuard 2 Fixed Sensor Head Specifications
Basic parameters
Working current DC 10 to 28V, 210mA at 24V
Power <5W
Output 4-20mA
Three-level programmable alarm relays (30 VDC, 2A)
RS-485 (Supports Modbus
Sampling Internal diaphragm pump, up to 500cc/min
IP rating IP-65
Mechanical interface 3/4” NPT Male
Installation 50.8 mm (2”) pipe-holding or wall mounting
User interface Three-key magnetic bar adjustment
Calibration Two points
Warranty 1 year for the pump, 2 years for the housing and electronics
Environmental parameters
Temperature -20°C to +55°C (-4°F to 131°F )
Humidity 0 to 95% relative humidity, non-condensing
Pressure 90 to 110kPa
Display
Display 128 x 64 matrix backlit LCD, supports graphic display
Physical parameters
Size 10.1” L x 7.9” W x 4.2”H (257 x 201 x 107 mm)
Weight 3.5 kg (7.7 lbs)
Material 316 stainless steel
Certification
ATEX Ex II 2(1)G, Ex d [ia Ga] IIC T4 Gb
UL/CSA Class 1, Div. 1, Groups ABCD T4
IECEx Ex d [ia Ga] IIC T4, Gb
DigiPID Sensor Module Specifications
Power supply 5V ±0.25V DC
Current 110mA max
Power consumption < 0.6W
Measuring range 0.01 to 100 ppm
0.1 to 1000 ppm
1 to 1000 ppm (No relays or correction factors)
Resolution 10 ppb, 1 ppm (depends on model)
Response time Pumped (T90): <30 s
Calibration Two-point off-line and field calibration
Optional three-point calibration
Accuracy ±2% for calibration point
Analogue output 0.5 - 2.5V (ro=1.0k)
Digital interface Serial Interface (UART)
Transmit (Tx): 3.3V TTL
Receive (Rx): 3.3V TTL
Warranty 2 years for the lamp, 1 year for the sensor, pump, electronics, and housing
Operating temperature -20oC to +55oC (-4oF to +131oF)
Humidity 0 to 95% RH non-condensing
EMI/RFI Highly resistant to EMI/RFI Compliant with EMC Directive 2004/108/EC
Package 316 stainless steel
Spray watertight for IP-65 rating
Dust membrane for sensor front protection
Size 49mm x 150.8mm (1.92” D x 5.94” L)
Weight < 550g (19.4 oz)
Certification
ATEX II 1 G EX ia IIC T4 and 1M1 Ex ia I
UL/CSA Class I, Div. 1, Groups A B C D T4
IECEx Ex ia IIC T4 Ga and Ex ia I`
Export Info
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    16 Items found.
(4313)

HONEYWELL  D03-2006-102

Mesh screws for use in RAEGuard safety barrier Adapter UL (Pack of 2) for Honeywell RAEGuard 2 PID.



$60.13 
(4311)

HONEYWELL  C01-2017-010

DigiPID Teflon UV electrode shield (Pack of 10) for Honeywell RAEGuard 2 PID.



$60.13 
(4309)

HONEYWELL  C01-2034-005

DigiPID internal dust filter (Pack of 5) for Honeywell RAEGuard 2 PID.



$64.28 
(4310)

HONEYWELL  490-0011-005

DigiPID external water trap filter (Pack of 5) for Honeywell RAEGuard 2 PID.



$73.61 
CYL-90098576
(1580)

PORTAGAS  CYL-90098576

Calibration Gas Iso-Butylene (C4H8) 100 ppm Balance Air, 34 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$103.16 
(4316)

HONEYWELL  081-0002-000

Lamp Cleaning Kit for Honeywell RAEGuard 2 PID.



$111.97 
CYL-90301684
(1293)

PORTAGAS  CYL-90301684

Calibration Gas Iso-Butylene (C4H8) 10 ppm Balance Air, 100 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$124.51 
CYL-10386054
(1295)

PORTAGAS  CYL-10386054

Calibration Gas Iso-Butylene (C4H8) 1000 ppm Balance Air, 100 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$124.51 
CYL-10386052
(1294)

PORTAGAS  CYL-10386052

Calibration Gas Iso-Butylene (C4H8) 500 ppm Balance Air, 100 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$124.51 
(4314)

HONEYWELL  C01-3007-100

DigiPID replacement Sensor Kit - Teflon construction with 3 electrodes for Honeywell RAEGuard 2 PID.



$276.83 
(4315)

HONEYWELL  C01-3012-000

DigiPID flowthough Stainless steel Adapter (included standard with all DigiPID Sensor modules) for Honeywell RAEGuard 2 PID.



$297.56 
D03-3003-000
(6726)

HONEYWELL  D03-3003-000

RAEGuard 2 PID Mounting Adapter



$305.86 
D03-3002-000
(6727)

HONEYWELL  D03-3002-000

RAEGuard 2 PID Replacement Pump Assembly



$705.02 
C01-0004-000
(4319)

HONEYWELL  C01-0004-000

DigiPID Sensor module isobutylene equivalent (1 - 1000) for Honeywell RAEGuard 2 PID. ATEX/IECEx/UL.



$1,833.45 
C01-0002-000
(4318)

HONEYWELL  C01-0002-000

DigiPID Sensor module isobutylene equivalent (0.1 - 1000) for Honeywell RAEGuard 2 PID. ATEX/IECEx/UL.



$5,188.48 
C01-0001-000
(4317)

HONEYWELL  C01-0001-000

DigiPID Sensor module isobutylene equivalent (0.01 - 100 ppm) for Honeywell RAEGuard 2 PID. ATEX/IECEx/UL.



$7,049.65 
> VOC PID :    9 Items found.
M011-0004-000
(6337)

MPOWER  M011-0004-000

mPower NEO Photo-ionization Handheld Gas Detector for Volatile Organic Compounds (VOC). Ranges from 1 ppb up to 15,000 ppm. Audible (90dB0), Visual (flashing LEDs) and wireless remote alarms. Built-in wireless modem and pump. Includes Bluetooth Low Energy (BLE) connectivity, Lithium-ion battery and USB Micro charger. Backlight display. Stainless steel housing. IP66/IP67. UL approval for Class I Div 1.

Configure

$2,560.00 
PQN-8136-1/2
(6965)

PROSENSE  PQN-8136-1/2

Prosense PQN-8136 Gas Detector with 10.6 eV PID sensor for VOC (Volatile Organic Compounds) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

$2,661.12 
PQD-8136-1/2
(6720)

PROSENSE  PQD-8136-1/2

Prosense PQD-8136 Gas Detector with 10.6 eV PID sensor for VOC (Volatile Organic Compounds) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

$2,851.20 
55001AL-0-9027/100P/L0
(7120)

RC SYSTEMS  55001AL-0-9027/100P/L0

RC Systems SenSmart 5500 3-wire gas detector for Volatile Organic Compounds VOC 10.0eV or 10.6eV with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$3,289.61 
35001AL-0-9029/0010P/L0
(6896)

RC SYSTEMS  35001AL-0-9029/0010P/L0

RC Systems SenSmart 3500 3 wire gas detector for Volatile Organic Compounds VOC 0-40ppm to 0-1000ppm Isobutylene with 'ST-48' smart transmitter with 10.0eV or 10.6eV PID sensor with arctic heater. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$3,662.33 
TXLLSLBMR-0000
(5956)

ION SCIENCE  TXLLSLBMR-0000

Ion Science Tiger XTL handheld detector for Volatile Organic Compounds (VOCs) with PID sensor (0-5000ppm). 10.6 eV Krypton lamp. Humidity resistant, rapid and accurate. IP65. Includes Li-ion battery, USB port, keypad, data logger, 2 visual alarms and sounder. ATEX, IECEx, UL and CSA approvals. *** Replaces Tiger LT ***

Configure

$3,724.00 
FAXSXBXX-3000D
(5955)

ION SCIENCE  FAXSXBXX-3000D

Ion Science Falco Fixed Detector for Volatile Organic Compounds (VOCs) in condensing atmospheres and extreme weather. PID sensor with 10.6 eV lamp. Pumped or diffused versions available. Includes Multi-coloured status display and long-life lamp. ATEX, IECEx, UL and CSA approvals.

Configure

$3,822.00 
967-PB5520-010
(6066)

DETCON  967-PB5520-010

Detcon PI-700 Universal Smart Gas Sensor with Photo Ionization Detector (PID) technology for VOC 0-10ppm to 0-5000ppm. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Built-in numeric display. Water-Proof, Corrosion-Proof and Vibration-Proof. NEMA4X. IP66. CSA (Class I Div 1) and ATEX Approvals.

Configure

 
TXXXSLBMP-0005
(5163)

ION SCIENCE  TXXXSLBMP-0005

Ion Science Tiger XT Select PID (photoionization) handheld detector for Volatile Organic Compounds (VOCs) with dynamic range 1ppb to 20000ppm and internal gas table with over 750 compounds. 10.6 eV Krypton lamp. Humidity resistant, rapid and accurate. IP65. Includes Li-ion battery, USB port, keypad, data logger, 2 visual alarms and sounder. ATEX, IECEx, UL and CSA approvals. *** Replaces Tiger ***

Configure

$6,188.70 
() Reviews | Write One      
....

H-D03-0009-000     $7,365
HONEYWELL / Detectors
Gas Detectors (explosion-proof) / Voc Pid
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.