Gds Gm/tx/01-19-05/00-00-00/1-0900 | Sulfur Dioxide | Gas Detectors (wireless) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

GDS   GM/TX/01-19-05/00-00-00/1-0900

SKU# (3429)
GDS GM/TX/01-19-05/00-00-00/1-0900

DETECTORS / GAS DETECTORS (WIRELESS)
SULFUR DIOXIDE

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
GDS GASMAX TX Stand-Alone Wireless Gas Monitor with stainless steel sensor head and integrated sensor configured for Sulfur Dioxide (SO2) with range 0-50 to 0-500 ppm. Battery-Powerded. 900 MHz or 2.4 GHz Integrated Modems. LCD Display and Aluminium Housing. FCC and IC approvals.

Inquiry

Features

  • Third-generation ultra-low power design for toxics and combustibles
  • Single or dual channel, local or remote Smart Sensors
  • Graphic display shows values, units, trend graph, alarm levels
  • Power ON / Power OFF using magnetic wand only
  • Non-intrusive, user-prompted calibration procedure
  • Transmits all setup information to new C2/TX Wireless Site Manager
  • Reliable Frequency-Hopping Spread Spectrum technology
  • Security settings to lock critical parameters
  • Auto-recognition of Smart Sensors uploads calibration data & more
  • Fault supervision circuitry detects failed sensor & transmits warning
  • Setup in hazardous area requires only simple magnetic wand
  • Typical > 1 mile range with local ‘whip’ antenna (900Mhz)
  • For VOC applications, see the GASMAX IIx gas monitor
  • Manufactured in USA

The GASMAX TX wireless gas monitor combines the latest in ultra-low power microprocessor design, infrared sensor technology and ease-of-use features to deliver the most advanced wireless toxic and combustible gas monitor available.

The GASMAX TX is compatible with all GDS Corp toxic sensors, including hydrogen sulfide, carbon dioxide, oxygen, hydrogen cyanide and many others. In addition, the GASMAX TX also supports the new SmartIR/LP low-power infrared sensor for hydrocarbon combustibles or carbon dioxide.

Advanced User Interface

The highly visible LCD display shows sensor status, calibrated engineering values and programmable tag name, along with a trend screen that displays the most recent 30 minute trend. A real-time clock and event log records calibration and alarm events for later review, and a menu- driven operator interface using magnetic keys eliminates all analog potentiometers and enables power on/off switching and setup without opening the enclosure.

Fully Integrated Wireless Solution

An internal easily-replaceable D-cell lithium battery and 900Mhz or 2.4Ghz license-free Frequency-Hopping Spread Spectrum (FHSS) wireless modem provide up to six months of continuous operation in typical applications. FHSS technology provides the best choice for long-range, reliable communications with high levels of noise immunity. When gas is present, the GASMAX TX transmits gas level data on six second intervals.

Complete Wireless System

The GASMAX TX is designed to operate most efficiently with the new mult-channel C2/TX Wireless System Manager. The C2/TX WSM supports up to 32 GASMAX/TX monitors and offers 8x relay outputs as well as optional serial MODBUS, data logging and WiFi access. In addition to the new C2/TX WSM, the GASMAX TX also works with GDS Corp C1 Protector 8/16 channel controller / receivers, C2 Quad Protector 4 channel controller / receivers and the new C64 Protector multi-channel controller.

Power Input Replaceable internal D-cell lithium battery; six-month operation (typical)
Display64 x 128 pixel LCD with 30-minute trend, bargraph and engineering units display.
InputSingle or dual channel input from 10-98xx toxic or 10-97xx infrared hydorcarbon combustible sensors
Standard OutputLicense-free 900Mhz or 2.4Ghz frequency-hopping spread spectrum (FHSS) wireless modem with data encryption
900MHz power adjustable from 10mW to 1.0 watt
2.4GHz output set at 50mW or 125mW (US only)
Receiver sensitivity typically -100dBm
Temp-25°C to +55°C (see sensor limitations)
HousingAluminum housing with epoxy paint standard; #316 stainless steel optional
DimensionsWidth 5.4” (137 mm), Height 8” (203 mm), Depth 5” (127 mm)
Shipping weight 6.5 pounds (3 kg)
ApprovalsFCC 15.247 & Industry Canada (IC)
WarrantyTwo years on electronics and one year on sensors from date of purchase

 Info/Quote Request
 Reseller & Volume Discounts

> ACCESSORIES - RELATED - CONSUMABLES :    6 Items found.
1200-0748
(3213)

GDS  1200-0748

GDS Gas Detector Calibration Gas Cylinder Sulfur Dioxide (SO2) 50ppm. Balance Air. 58L Aluminium Cylinder.

Configure

 
1200-0558
(3212)

GDS  1200-0558

GDS Gas Detector Calibration Gas Cylinder Sulfur Dioxide (SO2) 10ppm. Balance Nitrogen. 58L Aluminium Cylinder.

Configure

 
10-9819-R05
(3359)

GDS  10-9819-R05

Electrochemical Smart Sensor configured for Sulfur Dioxide (SO2) with range 0-50/0-500 ppm. For GDS GASMAX CX, GDS-58NXP, GDS-68XP, GDS-78XP.

Configure

 
1200-0729
(3144)

GDS  1200-0729

GDS Gas Detector Calibration Gas Kit Sulfur Dioxide (SO2) 50ppm. Balance Air. Kit includes a 58L Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
1200-0728
(3143)

GDS  1200-0728

GDS Gas Detector Calibration Gas Kit Sulfur Dioxide (SO2) 10ppm. Balance Nitrogen. Kit includes a 58L Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

Configure

 
90-50
(1642)

RC SYSTEMS  90-50

RC Systems ViewSmart 400 4-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 4 x 3-wire bridge or 4 x 4-20mA input channels board.

Configure

$3,525.97 
> SULFUR DIOXIDE :    25 Items found.
M001-0007-000
(6008)

MPOWER  M001-0007-000

mPower UNI MP100 Portable Single Gas Detector for detection of Sulfur Dioxide (SO2) 0-20ppm or 0-100ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$238.40 
BWC2-S
(4266)

BW  BWC2-S

BW Clip portable gas detector 2 year maintenance free for Sulfur Dioxide SO2. Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

 
TX1-5
(5968)

INDUSTRIAL SCIENTIFIC  TX1-5

Industrial Scientific Tango TX1 Gas Detector for Sulfur Dioxide (SO2) 1-150 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

 
BWC2R-S
(5150)

BW  BWC2R-S

BW Clip Real Time portable gas detector with 2 year maintenance free for Sulfur Dioxide (SO2). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

 
BWS1-S-Y
(6395)

BW  BWS1-S-Y

BW Solo Serviceable Single-gas Detector for Sulfur Dioxide (SO2) 0-100 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

 
364-455-01-365-771-11
(6158)

DELPHIAN  364-455-01-365-771-11

Delphian GazTell Fixed Point Electrochemical Gas Detector for Sulfur Dioxide (SO2) 0-20 ppm. 4-20mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
PC3-6624
(6807)

PROSENSE  PC3-6624

Prosense PC3-6624 Gas Detector with Electrochemical sensor for Sulfur Dioxide (SO2) with range 0-10 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$823.68 
P-6634
(6782)

PROSENSE  P-6634

Prosense P-6634 Gas Detector with Electrochemical sensor for Sulfur Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$900.90 
SPSTAXS1
(1484)

HONEYWELL  SPSTAXS1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Sulfure Dioxide (SO2) 0-15ppm complete with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20mA loop output. ATEX Approved. (Optional ranges: 0-15 ppm, 0-50 ppm)

Configure

$993.35 
PQN-6634-1/2
(6955)

PROSENSE  PQN-6634-1/2

Prosense PQN-6634 Gas Detector with Electrochemical sensor for Sulfide Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,081.08 
GG-SO2-20
(5983)

CALIBRATION TECHNOLOGIES  GG-SO2-20

CTI GG-SO2 Electrochemical Gas Sensor for Sulfur Dioxide (SO2) 0-20 ppm. 4-20 mA output, 24VDC power supply. NEMA 3RX polycarbonate housing. CSA and UL approved.

Configure

$1,122.00 
2106B1420
(1465)

HONEYWELL  2106B1420

Honeywell Sieger Sensepoint Gas Detector Transmitter for Sulfur Dioxide (SO2) (0-15 to 0-50 ppm) ppm with Surecell Toxic Sensor. 2 wire 4-20mA loop output. ATEX/IECEx CSA Class I Division 2 Certified.

Configure

$1,135.98 
PQD-6634-1/2
(6743)

PROSENSE  PQD-6634-1/2

Prosense PQD-6634 Gas Detector with Electrochemical sensor for Sulfide Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

$1,235.52 
1100ALD-109026/010P-L0
(6917)

RC SYSTEMS  1100ALD-109026/010P-L0

RC Systems SenSmart 1100 gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,314.28 
GG-SO2-20-EXP
(5981)

CALIBRATION TECHNOLOGIES  GG-SO2-20-EXP

CTI GG-SO2-EXP Explosion Proof Electrochemical Gas Sensor for Sulfur Dioxide (SO2) 0-20 ppm. 4-20 mA output, 24VDC power supply. Explosion Proof Copper-free aluminum enclosure for Class l, Div 1 & 2, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved.

Configure

$1,383.00 
100-0008-SS/100-0015-SO2
(4762)

ESP SAFETY  100-0008-SS/100-0015-SO2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Sulfur Dioxide (SO2) 0-20 or 0-100ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. Optional 2nd sensor available.

Configure

$1,440.00 
51001AL-0-1026/0010P/L0
(7132)

RC SYSTEMS  51001AL-0-1026/0010P/L0

RC Systems SenSmart 5100 3-wire gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$1,594.80 
S3KUL2-XNXXSS1SS
(1941)

HONEYWELL  S3KUL2-XNXXSS1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring SULFUR DIOXIDE (SO2) with electrochemical sensor, 2-wire 4-20mA loop, LCD Display, 0-15.0 ppm, user adjustable (5.0 to 20.0 ppm, 5.0 ppm increments) Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$1,737.61 
961-550026-020G
(6376)

DETCON  961-550026-020G

Detcon DM-100-SO2 Electrochemical Sulfur Dioxide (SO2) 0-20ppm/0-100ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div. 1, Groups A, B, C, & D.

Configure

 
2100AL-0-9026/010P/L0
(131)

RC SYSTEMS  2100AL-0-9026/010P/L0

RC Systems SenSmart 2100 2 wire 4-20mA Loop Powered gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Stainless steel or aluminum enclosure. CSA certified for Class 1 Div 1 & 2 (Explosion Proof).

Configure

$1,789.61 
SPXCDULNS2
(1899)

HONEYWELL  SPXCDULNS2

Honeywell Sensepoint XCD RTD Gas Detector for Sulfur Dioxide (SO2) with Electrochemical Sensor. Aluminium alloy LM25 or 316 stainless steel housing, PPS sensor head, tri-color backlit LCD Display. IP67. 3-wire 24 VDC power. Includes 3 programmable alarm relays and 4-20mA output (sink or source selectable), Modbus RTU option available. User-Selectable full scale range 0 to 15 ppm. UL/cCSAus Approved for Class I Div 2. Remote Sensor Option.

Configure

$1,920.63 
31001AL-0-9026/010P/L0
(5789)

RC SYSTEMS  31001AL-0-9026/010P/L0

RC Systems SenSmart 3100 3 wire gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,967.53 
967-555590-020
(5147)

DETCON  967-555590-020

Detcon DM-700-SO2 Electrochemical Smart Sulfur Dioxide (SO2) 0-20ppm/0-100ppm Sensor Assembly with LED display and Aluminum Junction Box. 4-20mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div. 1, Groups B, C, & D. CSA and ATEX approvals.

Configure

 
XNXUTAENNNNN-XNXXSS1SS
(4193)

HONEYWELL  XNXUTAENNNNN-XNXXSS1SS

Honeywell XNX Universal Gas Detector Transmitter for monitoring Sulfur Dioxide (SO2) compatible with all Honeywell gas sensing technologies with aluminum housing. 3-wire 4-20mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL-2. Optional ranges: 0-15ppm, 0-50ppm

Configure

$2,221.73 
6100AL1-0-1026/0030P
(7014)

RC SYSTEMS  6100AL1-0-1026/0030P

RC Systems SenSmart 6100 3 wire Dual Channel Gas Detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-44' smart transmitter and GEN2 smart sensor. Includes Color TFT Display, 4-20mA output. OPTIONAL two RS-485 Modbus ports, embedded Ethernet with Webserver, Modbus TCP, 2 Alarm + Fault Relays. 10-30 VDC. Aluminum, Stainless Steel or Poly enclosure. CSA certified for Class 1 Div 1 (Explosion-Proof). IP66.

Configure

$2,389.61 
() Reviews | Write One      
....

GM/TX/01-19-05/00-
GDS / Detectors
Gas Detectors (wireless) / Sulfur Dioxide
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.