Gas Leak Detectors, Analyzers, Alarm Devices and Calibration Gas
RAE 045-0512-000
  • Overview
  • Features
  • Specs
  • Literature

ToxiRAE II PGM-1110 Personal Portable Sigle-Gas Monitor For Carbon Monoxide 0-500ppm or 0-1999ppm (CO). Provides continuos display of the gas concentration, STEL, TWA and peak values. Field repleaceable sensor, filter and battery. IP-65. UL, ATEX, CeMark and IECEx Approved. *** Discontinued replaced by ToxiRAE 3 (G01-0101-000) ***

Inquiry

The ToxiRAE II is a full-featured personal clip-on gas monitor that provides a continuous display of the gas concentration, STEL, TWA and peak values for over 10 toxic gases and oxygen deficiency or enrichment hazards.

  • Suits a wide variety of applications
  • Compact and lightweight
  • Rugged water- and dust- resistant housing
  • Intrinsically safe
Key Features
  • One-button operation
  • Field-replaceable filter and battery
  • Field-replaceable sensor in Europe and Asia only
  • Unmistakable alarm notification: bright red flashing LED, loud 90 dB buzzer, powerful vibration
  • Designed to meet IP-65 specifications Applications
  • Highly resistant to EMI/RFI. Compliant with EMC Directive 89/336/EEC
  • Durable, highly impact-resistant, carbon-loaded ABS housing
  • Stainless-steel corrosion-resistant alligator clip
  • Multiple sensors available to cover a variety of applications, including: H2S, CO, O2 , NH3 , CI2 , CIO2 , HCN, NO, NO2 , PH3 , and SO2 sensors
  • Hands-free use: clips onto a hardhat, shirt pocket, shoulder strap, or belt
  • Displays STEL, TWA, peak values, and alarm minutes used
Applications
  • Oil and gas
  • Chemical plants
  • Fire service
  • Pulp and paper
  • Industrial safety
  • Waste-water treatment plants
  • Landfill operations
  • Power plants
  • Steel mills
Monitor includes
  • ToxiRAE II detector with sensor as specified
  • Operation and maintenance manual
  • Rugged stainless-steel alligator clip (installed)
  • Calibration adapter
  • High-capacity Lithium battery installed

Specifications
Size 3.6" x 1.9" x 0.9" (9.3 cm x 4.9 cm x 2.2 cm)
Weight 3.6 oz (102 g) with clip
Battery User-replaceable 2/3 AA high-capacity Lithium battery (use only RAE Systems batteries).
Operating Period 2 years typical battery life when used 8 hours/day with less than 5 minutes of alarms per day.
Display Easy-to-read LCD continuously displays gas concentration and text messages
Keypad One-button operation
Direct Readout Instantaneous display of toxic gas concentration in ppm (or oxygen in Vol %)
STEL, TWA, and Peak values
Alarm minutes consumed
Alarms Audible: 90dB at 10 cm
Visible: Bright red/green LED bar visible from top, front, and sides
Sensory: Built-in vibration alarm
High: Displays “High,” emits 3 beeps and flashes every 3 seconds
Low: Displays “Low,” 2 beeps and flashes every 3 seconds
STEL: Displays “STEL,” 1 beep and flash every 3 seconds
TWA: Displays “TWA,” 1 beep and flash every 3 seconds
Low battery: Displays empty battery symbol, 1 beep per minute
Calibration Two-point field calibration
Temperature -40° to 131° F (-40° to 55° C) for O 2 , CO, and H 2 S. For specific temperature ranges for other sensors, please reference RAE Systems Technical Note TN-114
Humidity 0% to 95% relative humidity (non-condensing)
EMI/RFI Highly resistant to EMI/RFI. Compliant with EMC Directive 89/336/EEC
IP Rating Engineered to meet IP-65 specifications
Hazardous Location Approvals UL/cUL Classified as Intrinsically Safe for use in Class I Division 1, Groups A, B, C, D
Hazardous Locations T5 rating (UL/cUL, ATEX)
ATEX, II 1G, EEx ia IIB T5, or II 2G, EEx ia IIC T5
CE Mark, European Conformity
IECEx Ex ia IICT4
Attachments Stainless steel alligator clip (installed), wrist strap
Warranty 2-year warranty for instruments with O 2 , CO, and H 2 S sensors (1 year for all others)

> CARBON MONOXIDE :    52 Items found.
CM-E1
(638)

MACURCO  CM-E1

Macurco CM-E1 Carbon Monoxide gas detector for residential and commercial office environment. Flush or surface mount options, alarm and trouble relays, and 85 dB buzzer. 9-32 VDC input. NFPA 720-2009 and UL 2075 listed. CSFM Approved.



$58.04 
PPS_-CO
(6813)

PROSENSE  PPS-CO

Prosense PPS-CO Addressable Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300ppm. ABS Plastic housing. Modbus RS485 RTU output. IP54. For Parking Garages and Tunnels.

Configure

$63.00 
M014-0001-000
(6333)

MPOWER  M014-0001-000

mPower UNI 321 Disposable Single Gas Detector for detection of Carbon Monoxide (CO) 1-500ppm. Up to 36 months of live. Large LCD display will show time remaining or low/high alarm levels when hit, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$100.80 
PPS-RCO
(6811)

PROSENSE  PPS-RCO

Prosense PPS-RCO Addressable Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300ppm. ABS Plastic housing. Relay and Modbus RS485 RTU outputs. IP54. For Parking Garages and Tunnels.



$108.00 
AZ-0016
(1497)

CO2METER  AZ-0016

CO2Meter dSense Portable Detector for Carbon Monoxide (CO) 0-1000 ppm. 80dB audible alarm. Includes 3 AAA Bateries, Soft Carrying Pouch and Manual.



$118.80 
BWC2-M50200
(4265)

BW  BWC2-M50200

BW Clip portable gas detector 2 year maintenance free for Carbon Monoxide CO. Low alarm set at 50 ppm, High alarm set 200 ppm. UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.



$165.75 
BWC2-M50
(4264)

BW  BWC2-M50

BW Clip portable gas detector 2 year maintenance free for Carbon Monoxide CO. Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$165.75 
M001-0002-000
(5994)

MPOWER  M001-0002-000

mPower UNI MP100 Portable Single Gas Detector for detection of Carbon Monoxide (CO) 0-500ppm to 0-2000ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$169.20 
BTN-4444
(6760)

PROSENSE  BTN-4444

Prosense BTN-4444 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300 ppm. ABS plastic housing. 2 Alarms and 1 Fault Relays and optional Modbus RS485 RTU output. IP54.

Configure

$171.00 
BWC2R-M
(5149)

BW  BWC2R-M

BW Clip Real Time portable gas detector with 2 year maintenance free for Carbon Monoxide (CO). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$187.00 
BWC3-M1535
(4269)

BW  BWC3-M1535

BW Clip portable gas detector 3 year maintenance free for Carbon Monoxide (CO). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved

Configure

$209.10 
BWC3R-M
(5153)

BW  BWC3R-M

BW Clip Real Time portable gas detector with 3 year maintenance free for Carbon Monoxide (CO). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$236.30 
TX1-1
(5965)

INDUSTRIAL SCIENTIFIC  TX1-1

Industrial Scientific Tango TX1 Gas Detector for Carbon Monoxide (CO) 1-1000 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

G01-0101-000
(3065)

RAE  G01-0101-000

ToxiRAE 3 PGM-1700 Personal Portable Single-Gas Monitor For Carbon Monoxide (CO) 0-500 and 0-1999ppm. Dust-tight and waterproof housing. Pinless micro sensor, large display, event logging, 95dB audible alarm, red flashing LEDs and internal vibration alarm. IP67. C1D1, ATEX and IECEx Approved.

10092522
(2649)

MSA  10092522

MSA ALTAIR Portable Single-gas Detector for Carbon Monoxide, alarms at 25 ppm and 100 ppm (CO) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$266.92 
LC-1112-A-000-1
(2913)

INTEC  LC-1112-A-000-1

Intec Controls PolyGard LC-1112 V3 Analog Gas Transmitter for Carbon Monoxide (CO) 0-150 / 0-200 / 0-250 / 0-300 ppm. 1 4-20mA & 2-10V analog output. Wall mounted. NEMA 4X Enclosure. UL Listed and CSA Certified.

Configure

$297.00 
BWS_-ML-Y
(6383)

BW  BWS-ML-Y

BW Solo Serviceable Single-gas Detector for Carbon Monoxide (CO) 0-2000 ppm. Small and lightweight. One button operation. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

$327.25 
PC3-4424
(6802)

PROSENSE  PC3-4424

Prosense PC3-4424 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$337.50 
10153986
(4450)

MSA  10153986

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Carbon Monoxide (CO) Range 0-9999 ppm. Low Alarm 25ppm, High Alarm 100ppm. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$373.46 
G02-B210-100
(3016)

RAE  G02-B210-100

ToxiRAE Pro PGM-1860 Personal Portable Monitor For Carbon Monoxide (CO) 0-500 ppm with replaceable sensor, filter and Li-ion battety. Automatic bumb testing and calibration with AutoRAE 2 (optional). Includes Datalogging, Graphical LCD display, 2 buttons for operation and programming. CSA, ATEX, IECEx and China Ex Approved. IP-65. Wireless-capable option.

Page: 1 | 2 | 3 | All