Rc Systems 90-50 | 4-channel | Multi-point Controllers | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

RC SYSTEMS   90-50

RC SYSTEMS 90-50

GAS DETECTION CONTROLLERS / MULTI-POINT CONTROLLERS
4-CHANNEL

$3,525.97  [3 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
RC Systems ViewSmart 400 4-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 4 x 3-wire bridge or 4 x 4-20mA input channels board.

90-50   
3,525.97

Enclosure Options
Serial Interface
Input
Output
Alarm Relays
Power Supply
Audible Alarm
Visual Alarm
Visual Alarm

 3 Weeks  ]


The ST-90 Quad Channel Controller provides simultaneous display and alarm functions for four monitored variables. Easy to configure and user friendly, the ST-90 Quad can function as a critical alarm controller for toxic gases, combustible gases, vibration, tank levels and other process values.

FEATURES

  • Accepts inputs from up to four 4-20mA sensors transmitters for long distance interfacing. Generates 24VDC external device power for transmitters and other devices
  • Three adjustable independent alarm levels per channel. “Relay Acknowledge” feature allows silencing of external audible devices during existing alarm conditions.
  • Graphic LCD readout displays monitored data as bar graphs, engineering units, and 30 minute trends. Alarm LED’s flash when new and become steady after acknowledged.
  • Two standard SPDT common alarm relays are configurable for HIGH and WARN or FAULT alarm conditions. Optional discrete channel alarm relays are also available.
  • Modbus® master/slave RS-485 serial port interfaces to Modbus® devices such as PCs, PLCs, DCS, and other RC Systems controllers
  • Cal Mode offers pushbutton zero/span calibration for direct sensor interface applications.
  • Authorization mode allows locking of critical configuration variables.
  • Touch and magnetic keypad are standard for non-intrusive operation in potentially hazardous locations
  • Enclosures Include: Non- Metallic, Epoxy Coated Steel, 316 SS, NEMA 4X, NEMA 7 Explosion-Proof wall mount packaging options available
  • Certified to CSA C22.2 NO. 152 for combustible detection and Class I, Division 2, Groups A,B,C,D
  • Non-volatile memory retains all configuration data indefinitely.
  • RS-485 Modbus® master/slave port for up to 128, devices to be multidropped on a single data highway for interrogation by another Modbus® master
  • Six additional 5 amp SPDT discrete channel alarm relays available (two are standard)
  • 4-20mA outputs, event log, strobe lights and audible annunciators also available
  • 50 and 120 Watt 24VDC power supplies available

SPECIFICATIONS
INPUTS Available inputs include 4-20mA with precision 100 ohm terminating resistor (0-2 Volt inputs may be accepted by removing the socketed terminating resistor) and bridge sensor inputs with adjustable sensor excitation and balance settings
STANDARD ALARM RELAYS (STANDARD) Two programmable, 5 amp 30VDC or 250VAC resistive Form C
ANALOG OUTPUTS (OPTIONAL) 10 bit 4-20mA output. Max load 800 ohms with nominal 24VDC power supply
DISCRETE ALARM RELAYS (OPTIONAL) Six 5 amp 30VDC or 250VAC resistive Form C
SERIAL PORT (OPTIONAL) Master/Slave RS-485 port equipped with Tx / Rx LED’s
Protocol is Modbus® RTU
DISPLAY 128 x 64 pixel graphic LCD with backlight displays bar graphs,trends, and engineering units. Six discrete LED’s indicate alarm status, CAL MODE, keypad activity
AMBIENT TEMPERATURE RANGE -25 to +60 degrees C
POWER SUPPLY 100-240 VAC / 10-30 VDC are standard primary power supplies
APPROVALS CSA C22.2 No 1010.1 and C22.2 No.152 for combustibles and ISA S82.02; UL 1604 / C22.2 No 213 (NEMA 4X = Division 2 Groups A,B,C,D, EN55011 and EN61000 (CE Mark)
90-12 = NEMA 7 Division 1 Group B,C,D
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)8531100045

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    10 Items found.
10-0221/QUAD
(3908)

RC SYSTEMS  10-0221/QUAD

RC Systems 4-20 mA 4-channel analog input board for ST-90 Quad Controllers



$268.83 
S-DP4
(6764)

PROSENSE  S-DP4

Prosense S-DP4 Gas Detector Controller, Alarm Panel for Up to 4 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer. Fault, Alarm1, Alarm2 and AUX Relays. Optional Modbus RS485 output and Alarm/Fault Relays for each channel. Polycarbonate Housing, IP66

Configure

$772.20 
S-DP8
(6765)

PROSENSE  S-DP8

Prosense S-DP8 Gas Detector Controller, Alarm Panel for Up to 8 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer. Fault, Alarm1, Alarm2 and AUX Relays. Optional Modbus RS485 output and Alarm/Fault Relays for each channel. Polycarbonate Housing, IP66

Configure

$900.90 
DVP-120
(640)

MACURCO  DVP-120

Macurco DVP-120 control panel features 12 sensor inputs, three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,302.82 
100-0009-01-A
(4724)

ESP SAFETY  100-0009-01-A

ESP Safety UPES 16-channel (4-20mA) gas and flame detector controller, or 128 Modbus digital RS-485 channels (16 ports 8 channels each) for ESP Devices. Includes Modbus RS-485 output port (both analog and digital versions), power supply and 3 alarm relays and audible alert. 3Ux19" modular size, FM & ABS Class I Division 1, Ex CE and IECEx Approved.

Configure

$1,732.50 
TPPLBDWA2NNNNNN
(5825)

HONEYWELL  TPPLBDWA2NNNNNN

Honeywell Touchpoint Plus Wall-mounted Alarm Controller for up to 8 gas detection channels (16 w/ expansion unit). Dustproof and waterproof. Polycarbonate ABS Housing (NEMA 4X). Includes touchscreen interface, built-in sounder, 3 alarm relay outputs, datalogging to SD card and remote reset and inhibit inputs. AC or DC supply voltage. Up to 24 relay outputs and 8mA outputs. IP65. UL and CSA approvals (Class I Div 2).

90-01
(3243)

RC SYSTEMS  90-01

RC Systems ViewSmart 200 2-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with 6 x optional alarm relays, in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 120VAC or 24VDC power supply. Modbus interface. Optional 2 x 3-wire bridge or 2 x 4-20mA input channels board.

Configure

$2,820.78 
TPPLBDWA2NNNNNN-TPPLEDWA2NNNNNN
(5827)

HONEYWELL  TPPLBDWA2NNNNNN-TPPLEDWA2NNNNNN

Honeywell Touchpoint Plus Wall-mounted Alarm Controller for 16 gas detection channels (includes expansion unit). Dustproof and waterproof. Polycarbonate ABS Housing (NEMA 4X). Includes touchscreen interface, built-in sounder, 3 alarm relay outputs, datalogging to SD card and remote reset and inhibit inputs. AC or DC supply voltage. Up to 24 relay outputs and 8 x mA outputs. IP65. UL and CSA approvals (Class I Div 2).

ST71P-1
(7026)

RC SYSTEMS  ST71P-1

RC Systems ViewSmart 1600+ 8 or 16-Channel Gas Detector Integral Alarm Controller with standard 5x 5A SPDT relays, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure. 24VDC power supply. Optional 4-20mA inputs, 4-20mA outputs, discrete and programmable alarm relays channels boards.

Configure

$6,217.56 
ST-72-02
(6921)

RC SYSTEMS  ST-72-02

RC Systems ViewSmart 6400 Digital Gas Detection CONTROLLER with 16, 32, 48 or 64 channels and LCD display of 320x240 pixels. Centralize display and alarm functions. UL and CSA approved for Class I, Division 2, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included. Standard SPDT 5A relays for HORN and FAULT, plus 3 programmable alarm relays included. NEMA 4X, NEMA 4X Stainless Steel, full 19" Rack mount and NEMA 7 wall-mount options. Optional 4-20mA inputs.

Configure

$12,179.52 
> 4-CHANNEL :    1 Items found.
S-DPX004
(7030)

PROSENSE  S-DPX004

Prosense S-DPX004 Gas Detector Controller, Alarm Panel for 4 x 4-20mA Channels, OLED Display, Alarm and Fault LED indicators for each detector and buzzer. Includes Modbus RTU RS485 output, 5 common alarm relays: Fault, Alarm-1, Alarm-2, Alarm-3 and overrange. Polycarbonate Housing, IP66.

Configure

$900.90 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.