Gas Leak Detectors, Analyzers, Alarm Devices and Calibration Gas
SKU# (164)

GDS  GDS-49-1-15-04

$710.00     Availability: 2 Weeks
 Info/Quote Request
 Shipping Rates
 Volume discount



GDS GDS-49-1-15-04 (1)
  • Overview
  • Features
  • Specs
  • Supplies
  • Related
  • Literature

GDS GDS-49 Remote Gas Detector Transmitter with Stainless steel sensor head configured for Hydrogen Sulfide (H2S) with range 0-25 to 0-5000 ppm, Explosion Proof (XP). 2-Wire 4-20 mA transmitter.

Part# with Options:        GDS-49-1-15-04
Price with Options:        710.00

Options:    

Configuration
(1) Configuration for GDS GDS-48/GDS-49/GDS-50
Sensor Head
(2) Sensor Head for GDS GDS-49 (non reactive gases)
Gas Range
(3) Gas Range for GDS (0-25 to 0-5000)

  Availability 2 Weeks  ]

The GDS-49 (Model 10-0248) two-wire toxic sensor transmitter provides a scaled 4-20mA current sink output suitable for long distance transmission to an appropriate receiver device such as a C1 or C2 Protector series controller or GASMAX transmitter.

Wide Variety of Available Sensors

The GDS-49 is compatible with all GDS Corp toxic sensors, including oxygen, hydrogen sulfide, chlorine, carbon monoxide and more. Built-in fault detection circuity constantly monitors the sensor for correct operation and sensors can easily be replaced in the field.

Rugged Detection

The GDS-49 is enclosed in a stainless steel housing with integrated flame arrestor and is CSA approved for all Class I, Division 1 and 2 hazardous environments. For certain highly reactive gases that are not compatible with stainless steel, the GDS-49 is also available in a configuration without a flame arrestor that can be installed as intrinsically safe (IS) with an approved IS barrier, A standard junction box is supplied with the GDS-49 for connection to field wiring.

Calibration Required

Initial factory adjustment is completed by installing a fixed gain resistor on the sensor. This resistor establishes the range and provides basic calibration. Since the GDS-49 electronics are completely sealed and potted for maximum protection, final calibration must be performed at the receiver device in order to meet the rated accuracy specifications and accomodate changes in sensor characteristics over time. GDS Corp. offers single, dual, four, eight and sixteen + channel controllers with compatible analog inputs suitable for final calibration, alarm, display and retransmission of monitored gas values.

Easy Installation

The GDS-49 includes an XP junction box and functions with loop voltages ranging from 10-30VDC; voltage drop across the GDS-49 is less than 9 volts. An integral “transient voltage suppressor” protects the GDS-49 against lightning and other electrical transients. Non-polarized wiring elimnates wiring errors.

FEATURES

  • Certified for Explosion Proof and Intrinsically Safe Installations
  • Compatible with all GDS Corp toxic sensors
  • Non-polarized loop powered interface eliminates wiring errors
  • Range and target gas configured by sensor module
  • Fault supervision circuitry detects failed or missing sensor & transmits warning (2mA)
  • Stainless steel case & potted electronics for high noise immunity in electrically noisy environments
  • Industry standard 4-20mA output signal for cable runs > 1000 ft
  • Available without flame arrestor for highly reactive gases
  • Easy interface to all GDS Corp 2, 4, 8 or 16+ channel controllers
  • Combine with GDS-55 Loop-Powered Alarm or GDS-54 Loop-Powered Indicator for more flexibility
  • Manufactured in USA

GDS-49 (Model 10-0248 & 10-0248IS) SPECIFICATIONS
Power Input: 10 - 30VDC 4 - 20mA current loop with less than 9V drop across GDS-49; Maximum 32mA draw with overrange sensors
Display None
Input Accepts microamp-level signals from local GDS Corp toxic or oxygen deficiency sensors
Calibration Range Rough calibration set by sensor; final calibration must be performed by remote receiver device
Accuracy +/- 5% of full scale range (typical)
Standard Output Standard 2-wire 4-20mA current sink output. Max loop R is 600 ohms with nominal 24VDC power supply.
Temp --25°C to +60°C (see sensor limitations)
Housing GDS-49 Stainless steel with or without flame arrestor
Dimensions Width 5.3” x Height 9.3” x Depth 2.75” with splash guard
Shipping weight 6.5 pounds (3 kg)
Approvals Model 10-0248 CSA Certified for Div. 1 & 2 Groups B, C, D Exia. Suitable for Explosion Proof and Intrinsically Safe installations.
Model 10-0248IS CSA Certified for Div. 1 & 2 Groups A, B, C, D. Suitable for Intrinsically Safe only.
IMPORTANT: Intrinsically Safe installations require IS barrier 10-0263 (MTL 7787P+) or equivalent./td>
Warranty Two years on electronics and one year on sensors from date of purchase
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

  • SENSORS (REPLACEMENT) > GDS ELECTROCHEMICAL
    10-9015-R04 Electrochemical Sensor for GDS-49 remote transmitter configured for Hydrogen Sulfide (H2S) with range 0-25/0-5000 ppm. ..

  • BARRIERS > GDS GASMAX II, GASMAX EC GAS MONITOR
    10-0263 GDS Intrinsically safe IS barrier for GASMAX II and GASMAX EC. Model MTL 7787P+ or equivalent ..

  • CALIBRATION GAS GDS > HYDROGEN SULFIDE
    1200-0268 GDS Gas Detector Calibration Gas Cylinder Hydrogen Sulfide (H2S) 25ppm. Balance Air. 58L Aluminium Cylinder. ..

  • CALIBRATION GAS GDS > HYDROGEN SULFIDE
    1200-0269 GDS Gas Detector Calibration Gas Cylinder Hydrogen Sulfide (H2S) 100ppm. Balance Methane. 58L Aluminium Cylinder. ..

  • CALIBRATION KITS GDS > HYDROGEN SULFIDE
    1200-0515 GDS Gas Detector Calibration Gas Kit Hydrogen Sulfide (H2S) 100ppm. Balance Methane. Kit includes a 58L Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, calibration cup and carrying case. Optional Zero Air Cylinder. ..

  • CALIBRATION KITS GDS > HYDROGEN SULFIDE
    1200-0538 GDS Gas Detector Calibration Gas Kit Hydrogen Sulfide (H2S) 25ppm. Balance Air. Kit includes a 58L Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, calibration cup and carrying case. Optional Zero Air Cylinder. ..

  • CONVERTERS > SIGNAL CONDITIONERS
    AD-FC-11 Signal conditioner and isolator with loop-powered 4-20 mA input and output signal; output can be field calibrated with offset and span adjustments. Slim-line plastic housing with integral 35mm DIN rail mounting adapter and removable screw terminals, 24VDC ..

  • HYDROGEN SULFIDE IN NATURAL GAS > HYDROGEN SULFIDE
    GDS-68XP1/1-15-04/1-0-0 GDS GDS-68XP Process Gas Monitor with Stainless Steel sensor head configured for Hydrogen Sulfide (H2S) with range 0-25 to 0-5000 ppm. Uses periodic sampling (from 3x per day to 12x per day) to extend sensor life and minimize discharge of sample gas. 4-2 ..

  • MULTI-POINT CONTROLLERS > 16-CHANNEL
    C1/SM/0000/000000/00000 C1 Multi-Point Alarm gas detector Controller with 8 or 16 channel alarm & display controller for monitoring applications. It can be configured for GAS MAX wireless gas monitors. Standard 5A SPDT common relays and up to 48 discrete relays. 1 or 2 optional ..

  • MULTI-POINT CONTROLLERS > 2-CHANNEL
    C2-00-090-00/00-000-00/0-0-0-0-0/0-0 GDS C2 2-Channel Gas Detector Integral Alarm Controller with standard 2x 5A SPDT relays, with optional visual-audible alarm, in standard CSA approved, Class I, Division 2 - NEMA 4X non-metallic enclosure 120 VAC, ready to use. For Electrochemical/Toxic ap ..

  • MULTI-POINT CONTROLLERS > 4-CHANNEL
    C2QUAD-00-00000-0-0 C2 Quad Protector Multi-Point Alarm Controller for gas detectors/transmitters with four channel alarm & display for monitoring applications. Accepts either 4 x 4-20mA, 4 x bridge-type, 2 x mA/2 bridge or wireless devices. It can be configured for GAS MAX ..


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer, Check and Money Order

Checkout with Paypal

> HYDROGEN SULFIDE :    61 Items found.
10092521
(1637)

MSA  10092521

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 10 ppm and 15 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$100.93 
BWC2-H510
(4263)

BW  BWC2-H510

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Low alarm set at 5 ppm, High alarm set to 10 ppm or 15 ppm. UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$101.40 
BWC2-H5
(4262)

BW  BWC2-H5

BW Clip portable gas detector 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$101.40 
M014-0002-000
(6332)

MPOWER  M014-0002-000

mPower UNI 321 Disposable Single Gas Detector for detection of Hydrogen Sulfide (H2S) 0.1-100ppm. Up to 36 months of live. Large LCD display will show time remaining or low/high alarm levels when hit, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, UL approval for Class I Div 1.

Configure

$106.40 
10071363
(5812)

MSA  10071363

MSA ALTAIR Portable Single-gas Detector for Hydrogen Sulfide, alarms at 7 ppm and 14 ppm (H2S) coupled with LED/audible/vibrating alarms. IP67. Superior dust/water protection, high RFI resistance and one-button operation. Available Certifications: Class 1, Division 1, Groups A, B, C and D. 2 years.



$112.15 
BWC2R-H
(5148)

BW  BWC2R-H

BW Clip Real Time portable gas detector with 2 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$187.00 
M001-0003-000
(6001)

MPOWER  M001-0003-000

mPower UNI MP100 Portable Single Gas Detector for detection of Hydrogen Sulfide (H2S) 0-50ppm to 0-1000ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, UL approval for Class I Div 1.

Configure

$188.00 
BWC3-H5
(4268)

BW  BWC3-H5

BW Clip portable gas detector 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

$209.10 
BWC3R-H
(5152)

BW  BWC3R-H

BW Clip Real Time portable gas detector with 3 year maintenance free for Hydrogen Sulfide (H2S). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

$236.30 
TX1-2
(5966)

INDUSTRIAL SCIENTIFIC  TX1-2

Industrial Scientific Tango TX1 Gas Detector for Hydrogen Sulfide (H2S) 1-500 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

$245.70 
G01-0102-000
(3067)

RAE  G01-0102-000

ToxiRAE 3 PGM-1700 Personal Portable Single-Gas Monitor For Hydrogen Sulfide (H2S) 0-100ppm. Dust-tight and waterproof housing. Pinless micro sensor, large display, event logging, 95dB audible alarm, red flashing LEDs and internal vibration alarm. IP67. C1D1, ATEX and IECEx Approved.



$247.00 
BTN-6444
(6724)

PROSENSE  BTN-6444

Prosense BTN-6444 Gas Detector with Electrochemical sensor for Hydrogen Sulfide (H2S) with range 0-100 ppm. ABS plastic housing. 2 Alarms and 1 Fault Relays and optional Modbus RS485 RTU output. IP54.

Configure

$306.00 
BWS_-HL-Y
(6389)

BW  BWS-HL-Y

BW Solo Serviceable Single-gas Detector for Hydrogen Sulfide (H2S) 0-200 ppm or 0-500 ppm. Small and lightweight. One button operation. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

$327.25 
10154076
(4446)

MSA  10154076

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S-LC) Range 0-100 ppm. Low Alarm 5ppm, High Alarm 10ppm. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$373.46 
10162042
(4447)

MSA  10162042

MSA ALTAIR 2X Portable Single Gas Detector with XCell Sensor Technology for Hydrogen Sulfide (H2S) STD Range 0-200 ppm. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$373.46 
G02-B110-100
(3017)

RAE  G02-B110-100

ToxiRAE Pro PGM-1860 Personal Portable Monitor For Hydrogen Sulfide (H2S) 0-100 ppm with replaceable sensor, filter and Li-ion battety. Automatic bumb testing and calibration with AutoRAE 2 (optional). Includes Datalogging, Graphical LCD display, 2 buttons for operation and programming. CSA, ATEX, IECEx and China Ex Approved. IP-65. Wireless-capable option.

Configure

$413.25 
10153984
(4448)

MSA  10153984

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) Range 0-200 ppm. Low Alarm 10ppm, High Alarm 15ppm. Stand-alone bump test. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$422.81 
10157955
(4455)

MSA  10157955

MSA ALTAIR 2XP Portable Single Gas Detector with XCell Pulse Technology for Hydrogen Sulfide (H2S) 5-10ppm. Stand-alone bump test. Polycarbonate Housing. 25 feet drop test. 95dB audible alarm. Monochrome LCD Display. IP67. cCSAus, ATEX and IEC Approved.

Configure

$422.81 
SPSTAXH1
(1474)

HONEYWELL  SPSTAXH1

Honeywell Zareba Sensepoint Gas Detector Transmitter for Hydrogen Sulfide (H2S) with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20mA loop output. ATEX Approved. (Optional ranges: 0-20 ppm, 0-50 ppm, 0-100 ppm)

Configure

$466.04 
TX-6-HS
(2045)

MACURCO  TX-6-HS

Macurco TX-6-HS low voltage Gas Detector, Controller and Transducer for Hydrogen Sulfide (H2S) 0-50 ppm. Selectable 4-20 mA output, buzzer, alarm and fan relays with digital display. 12 to 24 VAC or 12 to 32 VDC power. ETL Listed to UL 61010-1.

Configure

$480.84 
Page: 1 | 2 | 3 | 4 | All