Honeywell Spstaxs1 | Sulfur Dioxide | Gas Detectors (explosion-proof) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

HONEYWELL   SPSTAXS1

SKU# (1484)



HONEYWELL SPSTAXS1

DETECTORS / GAS DETECTORS (EXPLOSION-PROOF)
SULFUR DIOXIDE

$993.35  [4 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
Honeywell Zareba Sensepoint Gas Detector Transmitter for Sulfure Dioxide (SO2) 0-15ppm complete with pre-wired universal junction box (1 threaded M20, 1 clearance 3/4"NPT, 1 clearance 1/2" NPT, 3 approved stopping plugs, earth continuity plate) and factory set toxic gas sensor. 2 wire 4-20mA loop output. ATEX Approved. (Optional ranges: 0-15 ppm, 0-50 ppm)

SPSTAXS1   
993.35

Weather housing
Gas Range

  [  4 Weeks  ]



Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres and allow for hands free, unhindered access, to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armored cable and glands or conduit.

Supplied with earth continuity plate for improved immunity to RFI the junction box offers the installer a choice of 1/2”, 3/4” and M20 connection via conduit or armored cable and Exe certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

  • Typical 2 to 5 years operational life
  • ATEX Certified
  • Complies with the latest European standards
  • Hazardous area approval AND performance
  • Universal junction box
  • One box, three entries
  • Metric and NPT compatability
  • Includes earth continuity plate for added RFI protection

Export Info
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    8 Items found.
CYL-90301522
(4097)

PORTAGAS  CYL-90301522

Calibration Gas Sulfur Dioxide (SO2) 25 ppm Balance Nitrogen, 34 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$113.24 
02000-A-1645
(1879)

HONEYWELL  02000-A-1645

Calibration Gas Flow Adaptor/calibration cup for use with Honeywell XCD RTD Sensepoint sensors.



$146.19 
BW-CG2S5058-EQUIV
(2189)

PORTAGAS  BW-CG2S5058-EQUIV

Calibration Gas Sulfur Dioxide 50ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$171.58 
CYL-10631030
(1309)

PORTAGAS  CYL-10631030

Calibration Gas Sulfur Dioxide (SO2) 20 ppm Balance Nitrogen, 58 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$171.58 
FC-11
(1563)

AUTOMATION DIRECT  FC-11

Signal conditioner and isolator with loop-powered 4-20 mA input and output signal; output can be field calibrated with offset and span adjustments. Slim-line plastic housing with integral 35mm DIN rail mounting adapter and removable screw terminals, 24VDC supply voltage. UL 508 listed, UL listed for Class I, Division 2, Groups A, B, C, D hazardous locations.



$174.00 
CYL-10629000
(1308)

PORTAGAS  CYL-10629000

Calibration Gas Sulfur Dioxide (SO2) 5 ppm Balance Nitrogen, 58 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$206.64 
(1936)

HONEYWELL  SPSTAXS1SS

Replacement sensor cartridge for Honeywell Zareba Sensepoint Gas Detector for Sulfur dioxide (SO2) 0-15ppm



$847.51 
(1937)

HONEYWELL  SPSTAXS2SS

Replacement sensor cartridge for Honeywell Zareba Sensepoint Gas Detector for Sulfur dioxide (SO2) 0-50ppm



$956.46 
> SULFUR DIOXIDE :    24 Items found.
M001-0007-000
(6008)

MPOWER  M001-0007-000

mPower UNI MP100 Portable Single Gas Detector for detection of Sulfur Dioxide (SO2) 0-20ppm or 0-100ppm. Includes large LCD display, 6 Bright Red Flashing LED, Vibrating and 90dB Audible Alarm Port. IP67, Event Logger, ATEX and UL approval for Class I Div 1.

Configure

$238.40 
BWC2-S
(4266)

BW  BWC2-S

BW Clip portable gas detector 2 year maintenance free for Sulfur Dioxide SO2. Configurables Low and high alarm (ppm). UL approved for Class I Div 1. ATEX, CE, EC and IECEx approved.

Configure

 
TX1-5
(5968)

INDUSTRIAL SCIENTIFIC  TX1-5

Industrial Scientific Tango TX1 Gas Detector for Sulfur Dioxide (SO2) 1-150 ppm. DualSense® Technology. 2-year run time. Includes LCD Display and 100dB audible alarm. Polycarbonate enclosure. IP66 & IP67. ATEX, CSA, IECEx, UL & INMETRO Approvals.

Configure

 
BWC2R-S
(5150)

BW  BWC2R-S

BW Clip Real Time portable gas detector with 2 year maintenance free for Sulfur Dioxide (SO2). Configurables Low and high alarm (ppm). One-button operation. Designed for harsh environments and extreme temperatures. Includes a real-time gas level display. IP66 / IP67. UL approved for Class I Div 1. ATEX, CE, EAC Ex and IECEx approved.

Configure

 
BWS1-S-Y
(6395)

BW  BWS1-S-Y

BW Solo Serviceable Single-gas Detector for Sulfur Dioxide (SO2) 0-100 ppm. Small and lightweight. One button operation, 3.6V 1.65Ah Lithium Battery. Visual, vibrating and audible alarms. Optional wireless version. IP66/68. ATEX, IECEx and CSA approvals for Class I Div 1.

Configure

 
364-455-01-365-771-11
(6158)

DELPHIAN  364-455-01-365-771-11

Delphian GazTell Fixed Point Electrochemical Gas Detector for Sulfur Dioxide (SO2) 0-20 ppm. 4-20mA Output. Optional Modbus RTU Output and Alarm Relays. SIL2 Approval. Suitable for Class I Div 1 & 2 Groups C, D.

Configure

 
PC3-6624
(6807)

PROSENSE  PC3-6624

Prosense PC3-6624 Gas Detector with Electrochemical sensor for Sulfur Dioxide (SO2) with range 0-10 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$823.68 
P-6634
(6782)

PROSENSE  P-6634

Prosense P-6634 Gas Detector with Electrochemical sensor for Sulfur Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$900.90 
PQN-6634-1/2
(6955)

PROSENSE  PQN-6634-1/2

Prosense PQN-6634 Gas Detector with Electrochemical sensor for Sulfide Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

$1,081.08 
GG-SO2-20
(5983)

CALIBRATION TECHNOLOGIES  GG-SO2-20

CTI GG-SO2 Electrochemical Gas Sensor for Sulfur Dioxide (SO2) 0-20 ppm. 4-20 mA output, 24VDC power supply. NEMA 3RX polycarbonate housing. CSA and UL approved.

Configure

$1,122.00 
2106B1420
(1465)

HONEYWELL  2106B1420

Honeywell Sieger Sensepoint Gas Detector Transmitter for Sulfur Dioxide (SO2) (0-15 to 0-50 ppm) ppm with Surecell Toxic Sensor. 2 wire 4-20mA loop output. ATEX/IECEx CSA Class I Division 2 Certified.

Configure

$1,135.98 
PQD-6634-1/2
(6743)

PROSENSE  PQD-6634-1/2

Prosense PQD-6634 Gas Detector with Electrochemical sensor for Sulfide Dioxide (SO2) with range 0-10ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

$1,235.52 
1100ALD-109026/010P-L0
(6917)

RC SYSTEMS  1100ALD-109026/010P-L0

RC Systems SenSmart 1100 gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-48' smart transmitter. Electrochemical sensor. 2-Wire 4-20mA output. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class 1 Div 1 (Explosion Proof).

Configure

$1,314.28 
GG-SO2-20-EXP
(5981)

CALIBRATION TECHNOLOGIES  GG-SO2-20-EXP

CTI GG-SO2-EXP Explosion Proof Electrochemical Gas Sensor for Sulfur Dioxide (SO2) 0-20 ppm. 4-20 mA output, 24VDC power supply. Explosion Proof Copper-free aluminum enclosure for Class l, Div 1 & 2, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved.

Configure

$1,383.00 
100-0008-SS/100-0015-SO2
(4762)

ESP SAFETY  100-0008-SS/100-0015-SO2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In sensor included to detect Sulfur Dioxide (SO2) 0-20 or 0-100ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. 316 Stainless Steel or Aluminum Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. Optional 2nd sensor available.

Configure

$1,440.00 
51001AL-0-1026/0010P/L0
(7132)

RC SYSTEMS  51001AL-0-1026/0010P/L0

RC Systems SenSmart 5100 3-wire gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with GEN2 smart sensor, Color backlit LCD Display and 4-20mA output, 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA Class I Division 1 (Explosion-Proof). Optional 2 RS-485 Modbus ports, 2 Programmable Alarm and Fault Relays.

Configure

$1,594.80 
S3KUL2-XNXXSS1SS
(1941)

HONEYWELL  S3KUL2-XNXXSS1SS

Honeywell Series 3000 MkII Gas Detector Transmitter, with aluminum housing (optional stainless steel) for monitoring SULFUR DIOXIDE (SO2) with electrochemical sensor, 2-wire 4-20mA loop, LCD Display, 0-15.0 ppm, user adjustable (5.0 to 20.0 ppm, 5.0 ppm increments) Available Approvals UL Class I, Div 1 & 2, ATEX Zone 0 and IECEx.

Configure

$1,737.61 
961-550026-020G
(6376)

DETCON  961-550026-020G

Detcon DM-100-SO2 Electrochemical Sulfur Dioxide (SO2) 0-20ppm/0-100ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div. 1, Groups A, B, C, & D.

Configure

 
2100AL-0-9026/010P/L0
(131)

RC SYSTEMS  2100AL-0-9026/010P/L0

RC Systems SenSmart 2100 2 wire 4-20mA Loop Powered gas detector for Sulfur Dioxide (SO2) 0-10ppm to 0-500ppm with 'ST-48' smart transmitter. Includes Graphic LCD Display, LED indicator and 4-20mA output. 10-30 VDC. Stainless steel or aluminum enclosure. CSA certified for Class 1 Div 1 & 2 (Explosion Proof).

Configure

$1,789.61 
SPXCDULNS2
(1899)

HONEYWELL  SPXCDULNS2

Honeywell Sensepoint XCD RTD Gas Detector for Sulfur Dioxide (SO2) with Electrochemical Sensor. Aluminium alloy LM25 or 316 stainless steel housing, PPS sensor head, tri-color backlit LCD Display. IP67. 3-wire 24 VDC power. Includes 3 programmable alarm relays and 4-20mA output (sink or source selectable), Modbus RTU option available. User-Selectable full scale range 0 to 15 ppm. UL/cCSAus Approved for Class I Div 2. Remote Sensor Option.

Configure

$1,920.63 
Page: 1 | 2 | All
() Reviews | Write One      
....

SPSTAXS1     $993
HONEYWELL / Detectors
Gas Detectors (explosion-proof) / Sulfur Dioxide
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.