Ami 221r | Oxygen Long Life | Gas Detectors (general-purpose) | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

AMI   221R

AMI 221R
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
AMI MODEL 221R Oxygen Deficiency Monitor with 10+ Year Zirconium sensor for continuous safety and confined space monitoring of Oxygen (O2) 0-25% in non-flammable applications. Includes 3 OSHA-Compliant alarms with relays, 95dB audible alarm and 4-digit LCD display. 4-20 mA and RS485 outputs. 100 - 240 VAC. NTRL certified to UL61010-1. IP65.

221R   
1,941.50

Accessories

 7 Days  ]


The AMI MODEL 221R has become the gold standard for oxygen deficiency & confined space monitoring. It is used by the thousands of government laboratories, space agencies, universities, and other industries to ensure the safety of their personnel. The virtually maintenance free design with a 10-year sensor is for use in NON-FLAMMABLE applications. It provides an incredibly accurate and stable reading over a wide temperature range.

DESIGN FOR SAFETY COMPLIANCE

The standard 221R has (3) OSHA-Compliant preset alarms with relay contacts and a 95 decibel audible alarm. The preset 20.0% Caution and 19.5% Danger low oxygen alarms as well as the 23.5% Enriched Oxygen alarm will de-energize alarm relays to operate fans or warning devices. The Enriched O2 or Danger low O2 alarms will also trigger the 95dB audible alarm to alert personnel. The 221R is NTRL-certified to UL61010-1 for safety electrical equipment for measurement, control and laboratory use.

10+ YEAR ZIRCONIUM OXIDE SENSOR

The AMI zirconium oxide sensor is virtually maintenance-free lasting up to 10 years with only routine calibration. It is extremely accurate and stable over a wide temperature range without being affected by changes in barometric pressure.

OPTIONAL REMOTE PROBE

An optional remote probe is available for continuous monitoring of locations up to 300ft (91m) from the control unit. It is an ideal solution for making sure difficult to access location are safe.

FULL SUITE OF STANDARD FEATURES

The MODEL 221R is full of standard safety features, including rechargeable battery backup and tamper resistant alarms to prevent user override of safety setpoints. It also offers advanced features that can be accessed through AMI’s COMMAND CENTER Software including automatic data logging of time stamped O2 measurements, power supply voltage and calibration history.

ANALYZER KEY FEATURES TAMPER RESISTANT PRESET ALARMS

OSHA Standard Preset Alarms

  • Below 19.5% Oxygen Danger Level — Red warning light, 95 dB audible alarm, Relay 2 de-energized
  • Above 23.5% Oxygen Enriched Level — Red warning light, 95 dB audible alarm, Relay 1 & 2 de-energized Addittonal Preset Alarm
  • Below 20.0% Oxygen Caution Level — Yellow caution light, Relay 1 de-energized
WASH DOWN READY

Designed to withstand direct water spray

SAFETY FEATURES
  • 1-hour rechargeable battery back-up
  • Tamper-resistant alarm setpoints
  • Front Panel lock-out
  • Calibration error detection and alarm
ACCESSORIES
  • Remote Sensing Probe for monitoring up to 300 ft from control unit
  • Pre-wired Type B Wall Plug
COMMAND CENTER
  • Calibration details
  • Alarm configurations Security Settngs
  • Data logger (time-stamped record of O2 measurements & Power History)
COMMON APPLICATIONS
  • LABORATORY RESEARCH
  • AIR SEPARATION
  • AEROSPACE

PHYSICAL & ELECTRICAL SPECIFICATIONS
WEIGHT4.0 lbs (1.8 kg)
MOUNTINGWall mount
GAS CONNECTIONSDiffusion screen. No pump, sample tubing or fittings required
DIGITAL DISPLAY4-digit LCD (reads full scale from 0.0% to 25.0%)
POWER100 – 240 VAC < 115 Watts, Battery back-up provides 1 hour of power
OUTPUTS4 – 20 mA isolated output signal
Bi-directional RS485 communication
OPERATIONAL SPECIFICATIONS
MEASUREMENT RANGE0 – 25.0%
AMIBIENT OPERATIONAL TEMPERATURE14°F to 122°F (-10°C to 50°C)
METHOD OF MEASUREMENTZirconium Oxide Sensor (10-year life expectancy)
ENVIRONMENTNot for use in areas where flammable gases may be present
MONITOR PERFORMANCE SPECIFICATIONS
MINIMUM DETECTION LIMIT0.05% of Oxygen
90% UPSCALE RESPONSE TIMES FOR SPECIFIC RANGES<12 sec for 0.0% – 25.0%
REPEATABILITY±1% of range or ±0.1% of oxygen, whichever is greater
DIURNAL TEMPERATURE SPECIFICATION<±1% of scale over temperature range
APPROVALSUL 61010-1 for Safety Electrical Equipment, CE Mark, Designed to Meet IP65
Export Info
Made inUnited States
Harmonized Tariff Code (HTC)9027102000

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESSORIES - RELATED - CONSUMABLES :    1 Items found.
SMARTO2
(5974)

FRESENIUS  SMARTO2

Fresenius Smart O2 Gas Analyzer for continuous measurement of Oxygen (O2) 0-5 vol%, 0-25 vol% or 5-95 vol% with zirconium oxide sensor. Includes 4 digital inputs (24 VAC/DC), 6 relay outputs, RS232 interface, compact case and touch panel display. 230 V power supply. ATEX certification included, UL optional.

Configure

$5,391.36 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.