Gasdetectorsusa.com: Gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas

(6850)

SIMPLEX TYCO 2099-9754

Simplex Tyco 2099-9XXX non-coded non-addressable manual station. Single or Double action operation. Surface or Flush mounting. High impact polycarbonate housing. Complies with ADA requirements. UL listed.

Configure

(3558)

E2S B100FLF012B/A

E2S B100FLF Panel Mount Beacon with 5W blinking filament bulb. Incorporates a pluggable terminal block. Bayonet fixing lens. Stainless steel fixings. 12VDC, 24VDC, 48VDC, 115VAC or 230VAC versions. IP65. GOST-R Cerfified.

Configure

(3560)

E2S B100LDA030B/A

E2S B100LDA Panel Mount LED Permanent Beacon. Incorporates a pluggable terminal block. Bayonet fixing lens. Stainless steel fixings. 10-30 VDC or 90-230VAC versions. IP65. GOST-R Cerfified.

Configure

(6851)

SIMPLEX TYCO 4906-9102

Simplex Tyco 4906-91XX TrueAlarm Non-Addressable multi-candela high intensity Strobe. Ceiling-Mounted. 24VDC. 1 Hz. 15, 30, 75, or 110 candela intensity selectable. High impact flame retardant housing. NEMA 1. Complies with ADA requirements. UL listed.

Configure

(3270)

E2S A100SONTELR

E2S A100SONTEL compact and high output telephone initiated Alarm Sounder 100dB(A). Three alarm tone frequency (siren, alternating, sweeping). Stainless steel fixings. High impact UL94 Housing. IP66. GOST-R Approved.

Configure

(3244)

E2S A100DC24R

E2S A100 compact and high output Alarm Sounder/Horn 104dB(A). Low current consumption and high SPL. 115VAC, 230VAC, 24V, 10-30V or 48V Versions. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

Configure

(6081)

DETCON 967-12ED90-100A

Detcon DM-700-C2H4 Electrochemical Smart Ethylene (C2H4) 0-100 ppm or 0-200 ppm Sensor Assembly with LED display. 4-20 mA and Modbus RS-485 outputs. 316 Stainless Steel Housing. Water Proof, Corrosion Proof, Vibration Proof and Explosion proof. NEMA 4X. IP66. Class I, Div 1, Groups B, C, & D. CSA and ATEX approvals. Optional Alarm Relays, HART.

Configure

(6720)

PROSENSE PQD-8136-1/2

Prosense PQD-8136 Gas Detector with 10.6 eV PID sensor for VOC (Volatile Organic Compounds) with ranges 0-100ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$2,546.37

(7057)

GAS DETECTORS USA BROKER AGENT

GasDetectorsUSA.com international purchase brokerage agent services, provide businesses and individuals located in different countries with the process of buying goods or services from suppliers located in the United States, acting as an intermediary between the buyer and the supplier. Fee Schedule based on purchase amount: $0-$1000 = 12%+$25, $1000-$3000 = 10%, $3000-$8000 = 9%, $8000-$15,000 = 8%, $15,000-$30,000 = 7%, $30,000-$50,000 = 6%, $50,000-$90,000 = 5%, $90,000-$150,000 = 4%, >$150,000 = 3%

(2371)

PORTAGAS MSA-493580-EQUIV

Calibration Gas Oxygen 5% Balance Nitrogen Size 100 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID neck ring)

Configure

$135.15

(6721)

PROSENSE P-3035

Prosense P-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$457.27

(6805)

PROSENSE PC3-6424

Prosense PC3-6424 Gas Detector with Electrochemical sensor for Hydrogen Sulfide (H2S) with range 0-100 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$475.20

(4179)

MEDC DB20W8NNNNN

MEDC DB20 Speaker (up to 8 Watts), Weatherproof only version. Zone 1 and Zone 2 use. IP66 and IP67.

Configure

$522.91

(6736)

PROSENSE PQD-5235-1/2

Prosense PQD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$851.78

(6719)

PROSENSE PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,246.28

(1225)

HONEYWELL XNXUTAVNNIF1

Honeywell XNX Universal Gas Detector Transmitter with MPD-AMIF1 IR Infrared sensor for %LEL Propane (C3H8) 0-100% LEL or Methane (CH4) 0-100% LEL and aluminum housing. The XNX is compatible with all Honeywell gas sensing technologies. 3-wire 4-20 mA HART loop, backlit LCD Display, option for Modbus, Foundation H1 Fieldbus, local Hart and relay outputs. UL Certified Class 1, Div 1 Groups A, B, C, D / ATEX Zone 1, SIL2. Optional Alarm Relays, Modbus, Fieldbus. *** Detector will be provided as two separate items: XNX transmitter & MPD sensor head, to be assembled by the end user ***

Configure

$2,390.83

(5842)

HONEYWELL TPPR-V-0541

Honeywell Touchpoint Pro 9 Way Communication/Power Rail with additional RCM For standard Wall Mount and Floor Standing Cabinet versions

$2,392.93

(6887)

RC SYSTEMS 39001AL-0-9022/0010P/9071/100L/L0

RC Systems SenSmart 3000 3 wire gas detector with 'ST-48' smart transmitter for Hydrogen Sulfide (H2S) 0-10ppm to 0-2000ppm and additional gas with catalytic bead or infrared sensor (Acetylene, Methane, HC or Propane). Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1(Explosion Proof).

Configure

$2,819.48

(7026)

RC SYSTEMS ST71P-1

RC Systems ViewSmart 1600+ 8 or 16-Channel Gas Detector Integral Alarm Controller with standard 5x 5A SPDT relays, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included in standard CSA approved, Class I, Div 2 - NEMA 4X non-metallic enclosure. 24VDC power supply. Optional 4-20 mA inputs, 4-20 mA outputs, discrete and programmable alarm relays channels boards.

Configure

$6,217.56

(6921)

RC SYSTEMS ST-72-02

RC Systems ViewSmart 6400 Digital Gas Detection CONTROLLER with 16, 32, 48 or 64 channels and LCD display of 320x240 pixels. Centralize display and alarm functions. UL and CSA approved for Class I, Div 2, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included. Standard SPDT 5A relays for HORN and FAULT, plus 3 programmable alarm relays included. NEMA 4X, NEMA 4X Stainless Steel, full 19" Rack mount and NEMA 7 wall-mount options. Optional 4-20 mA inputs.

Configure

$12,179.52

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-519-0400. Powered by: