Gasdetectorsusa.com: Gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas
Acd, Aimsafety, Ams, Analytical Technology, Automation Direct, Autronica, Bw, Calibration Technologies, Cool Air, Delphian, Detcon, Det-tronics, E2s, Esp Safety, Felix, Fhf, Forensics Detectors, Gas Clip, Gas Detectors Usa, Gasco, Gds, Harvard, Honeywell, Industrial Scientific, Infrared Industries, Intec, Interscan, Ion Science, Ivc, Kwikdraw, Macurco, Medc, Mpower, Mru, Notifier, Nova, Portagas, Prosense, Rc Systems, Rhino, Simplex Tyco, Simtronics, Solo, Spectrex, System Sensor, Tomar, Uniphos, United Security
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas
804425
(5309)

KWIKDRAW  804425

KwikDraw 2-BOXES Gas Detector Tubes for Nitrogen Dioxide 2 - 140 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5085844



$149.60 
BROKER AGENT
(7057)

GAS DETECTORS USA  BROKER AGENT

GasDetectorsUSA.com international purchase brokerage agent services, provide businesses and individuals located in different countries with the process of buying goods or services from suppliers located in the United States, acting as an intermediary between the buyer and the supplier. Fee Schedule based on purchase amount: $0-$1000 = 12%+$25, $1000-$3000 = 10%, $3000-$8000 = 9%, $8000-$15,000 = 8%, $15,000-$30,000 = 7%, $30,000-$50,000 = 6%, $50,000-$90,000 = 5%, $90,000-$150,000 = 4%, >$150,000 = 3%



 
SAM-2
(5412)

UNIPHOS  SAM-2

Uniphos 2-BOXES Gas Detector Tubes for Ammonia 1.25-25 ppm Extended range, 10 tubes per box, 5-mm diameter tubes for use with piston hand pumps.



$109.76 
ISC-1810-3127-EQUIV
(2569)

PORTAGAS  ISC-1810-3127-EQUIV

Calibration Gas Hexane 2750 ppm (25% LEL) Balance Air 100 Liter GAL C-10 Inlet Cylinder (Made by Portagas) (No RFID tag)

Configure

$135.15 
487343
(5184)

KWIKDRAW  487343

KwikDraw 2-BOXES Gas Detector Tubes for Bromomethane 20 - 270 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5086834



$147.84 
803948
(5260)

KWIKDRAW  803948

KwikDraw 2-BOXES Gas Detector Tubes for Hydrogen Chloride 1 - 30 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5085846



$176.00 
804428
(5336)

KWIKDRAW  804428

KwikDraw 2-BOXES Gas Detector Tubes for Propylene 20 - 5,000 ppm 10 tubes per box, 7-mm diameter tubes for use with bellows hand pump. Global Part# D5086833



$176.00 
P-3035
(6721)

PROSENSE  P-3035

Prosense P-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Methane, Propane, Butane, Hydrogen, Gasoline, Diesel, JP8, Ammonia, Pentane, Hexane, Alcohols, Benzene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

$457.27 
PC3-6424
(6805)

PROSENSE  PC3-6424

Prosense PC3-6424 Gas Detector with Electrochemical sensor for Hydrogen Sulfide (H2S) with range 0-100 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

$475.20 
1200-0532
(3139)

GDS  1200-0532

GDS Gas Detector Calibration Gas Kit Propylene (C3H6) 50% LEL. Balance Air. Kit includes a 58DAL Aluminium Cylinder of Calibration Gas, fixed flow regulator, tubing, and carrying case. Optional Zero Air Cylinder.

PQD-5235-1/2
(6736)

PROSENSE  PQD-5235-1/2

Prosense PQD-XY35 Gas Detector with Pellistor (Catalytic Bead) sensor for Hydrocarbons (Cyclo Hexane, Cyclo Pentane, Dioxane, Butyl Alcohol, Styrene, Xylene, Acetylene, Ethylene Oxide, Vinyl Acetate, JP8 Fuel, Formaldehyde, Nonane, Acetaldehyde, Isobutylene and others) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$851.78 
SV-7504
(7388)

PROSENSE  SV-7504

Prosense SafeVader SV-7504 Fixed Gas Detector with Electrochemical sensor for Hydrogen Cyanide (HCN) with range 0-25ppm. 4-20 mA Analog, Modbus RS485 RTU and relay outputs (Alarm1, Alarm2, Fault). 12 to 28VDC. ABS Plastic enclosure. IP54.



$995.93 
PQD-3033-1/2
(6719)

PROSENSE  PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20 mA Analog and Modbus RS485 RTU outputs, Marine Bureau Veritas Certification, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2), UL/CSA (Class I Div 1), UKCA or INMETRO approval, optional SIL2 and HART. IP65, Optional IP66 Adaptor.

Configure

$1,246.28 
DVP-120C
(7312)

MACURCO  DVP-120C

Macurco DVP-120C 4-20mA and Addressable Gas Detection and Ventilation Alarm Panel with BACnet MS/TP output. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on 2 channels and 12 x 4-20 mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20 mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. UL2017 , LADBS approval. Title 24.



$1,612.21 
SPXCDULNO2
(5108)

HONEYWELL  SPXCDULNO2

Honeywell Sensepoint XCD RTD Gas Detector for Oxygen (O2) with Electrochemical Sensor. Aluminium alloy LM25 or 316 stainless steel housing, PPS sensor head, tri-color backlit LCD Display. IP67. 3-wire 24 VDC power. Includes 3 programmable alarm relays and 4-20 mA output (sink or source selectable), Modbus RTU option available. User-Selectable full scale range 25% v/v. UL/cCSAus Approved for Class I Div 2. Remote Sensor Option.

Configure

$1,995.75 
STEXB2X21DC024CB2A1R/A
(6449)

E2S  STEXB2X21DC024CB2A1R/A

E2S STExB2X21 21 Joule Xenon Strobe Beacon with 1Hz, 1.5Hz and double flash rates. IP66 corrosion proof 316L stainless steel enclosure with guard. 4 x M20 ISO entries. Suitable for For All Zone 1, 2, 21 & 22. IECEx and ATEX Approved.

961-390026-001C
(6373)

DETCON  961-390026-001C

Detcon DM-100-O3 Electrochemical Ozone (O3) 0-1ppm Sensor Assembly with optional loop powered display. 4-20 mA. Features intelligent electronices, non-intrusive operator interface and comprehensive fault diagnostics. 316 Stainless Steel Housing with 3/4" NPT thread. XP-instrinsically safe. Class I, Div 1, Groups A, B, C, & D. Optional Alarm Relays.

39001AL-0-9022/0010P/9071/100L/L0
(6887)

RC SYSTEMS  39001AL-0-9022/0010P/9071/100L/L0

RC Systems SenSmart 3000 3 wire gas detector with 'ST-48' smart transmitter for Hydrogen Sulfide (H2S) 0-10 ppm to 0-2000 ppm and additional gas with catalytic bead or infrared sensor (Acetylene, Methane, HC or Propane). Includes Graphic LCD Display, LED indicator and 4-20 mA output, optional alarm relays and Modbus RTU. 10-30 VDC. Aluminum or Stainless Steel enclosure. CSA certified for Class I Div 1(Explosion Proof).

Configure

$2,819.48 
ST71P-1
(7026)

RC SYSTEMS  ST71P-1

RC Systems ViewSmart 1600+ 8 or 16-Channel Gas Detector Integral Alarm Controller with standard 5x 5A SPDT relays, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included in standard CSA approved, Class I, Div 2 - NEMA 4X non-metallic enclosure. 24VDC power supply. Optional 4-20 mA inputs, 4-20 mA outputs, discrete and programmable alarm relays channels boards.

Configure

$6,217.56 
ST-72-02
(6921)

RC SYSTEMS  ST-72-02

RC Systems ViewSmart 6400 Digital Gas Detection CONTROLLER with 16, 32, 48 or 64 channels and LCD display of 320x240 pixels. Centralize display and alarm functions. UL and CSA approved for Class I, Div 2, 2 standard Master/Slave RS485 ports and Modbus TCP Client/Server port with web server included. Standard SPDT 5A relays for HORN and FAULT, plus 3 programmable alarm relays included. NEMA 4X, NEMA 4X Stainless Steel, full 19" Rack mount and NEMA 7 wall-mount options. Optional 4-20 mA inputs.

Configure

$12,179.52 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.